lkml.org 
[lkml]   [2022]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/1] Add a driver for the ChromeOS human presence sensor (HPS)
Date
This series adds a driver for the ChromeOS human presence sensor
(a.k.a. HPS) device, attached on the I2C bus. The sensor is a
hardware-isolated module which reports a high-level presence signal,
e.g., whether there is person in front of the computer or not.

The driver exposes the device to userspace as a character device, which
can be used to control the power state of the device. The driver
automatically turns power off to the sensor unless a process is using
it.

More information about HPS, its firmware and communication protocol can
be found at
https://chromium.googlesource.com/chromiumos/platform/hps-firmware.

Changes in v5:
- Updated MAINTAINERS.

Changes in v4:
- Simplified open/release pm logic.
- Renamed device to "cros-hps".
- Stylistics cleanups.

Changes in v3:
- Moved from drivers/misc to drivers/platform/chrome.

Changes in v2:
- Removed custom ioctl interface.
- Reworked to use miscdev.

Sami Kyöstilä (1):
platform/chrome: add a driver for HPS

MAINTAINERS | 6 +
drivers/platform/chrome/Kconfig | 10 ++
drivers/platform/chrome/Makefile | 1 +
drivers/platform/chrome/cros_hps_i2c.c | 151 +++++++++++++++++++++++++
4 files changed, 168 insertions(+)
create mode 100644 drivers/platform/chrome/cros_hps_i2c.c


base-commit: 8edd2752b0aa498b3a61f3caee8f79f7e0567fad
--
2.38.0.rc1.362.ged0d419d3c-goog

\
 
 \ /
  Last update: 2022-10-12 06:10    [W:0.074 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site