lkml.org 
[lkml]   [2022]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 3/5] ARM: dts: hpe: Add PLREG/SPI Support
Date
From: Nick Hawkins <nick.hawkins@hpe.com>

Adding support for the Programmable Logic Register driver in the HPE GXP
SoC. Additionally adding support for the SPI driver that has already
been committed to linux (See: drivers/spi/spi-gxp.c).

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
---
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 275 +++++++++++++++++++++++
arch/arm/boot/dts/hpe-gxp.dtsi | 28 ++-
2 files changed, 302 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..c97b052c4868 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -23,4 +23,279 @@
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ gpios = <&plreg 6 0>;
+ default_state = "off";
+ };
+
+ led-heartbeat {
+ gpios = <&plreg 7 0>;
+ default_state = "off";
+ };
+
+ led-identify {
+ gpios = <&plreg 56 0>;
+ default-state = "off";
+ };
+
+ led-health_red {
+ gpios = <&plreg 57 0>;
+ default_state = "off";
+ };
+
+ led-health_amber {
+ gpios = <&plreg 58 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&spifi {
+ status = "okay";
+ flash@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ label = "u-boot";
+ reg = <0x0 0x60000>;
+ };
+
+ u-boot-env@60000 {
+ label = "u-boot-env";
+ reg = <0x60000 0x20000>;
+ };
+
+ kernel@80000 {
+ label = "kernel";
+ reg = <0x80000 0x4c0000>;
+ };
+
+ rofs@540000 {
+ label = "rofs";
+ reg = <0x540000 0x1740000>;
+ };
+
+ rwfs@1c80000 {
+ label = "rwfs";
+ reg = <0x1c80000 0x250000>;
+ };
+
+ section@1ed0000{
+ label = "section";
+ reg = <0x1ed0000 0x130000>;
+ };
+ };
+ };
+ flash@1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ host-prime@0 {
+ label = "host-prime";
+ reg = <0x0 0x02000000>;
+ };
+
+ host-second@2000000 {
+ label = "host-second";
+ reg = <0x02000000 0x02000000>;
+ };
+ };
+ };
+};
+
+&plreg {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "", "", "", "", "",
+ "", "POWER", "HEARTBEAT", "FAN1_INST", "FAN2_INST",
+ "FAN3_INST", "FAN4_INST", "FAN5_INST", "FAN6_INST", "FAN7_INST",
+ "FAN8_INST", "FAN9_INST", "FAN10_INST", "FAN11_INST", "FAN12_INST",
+ "FAN13_INST", "FAN14_INST", "FAN15_INST", "FAN16_INST", "FAN1_FAIL",
+ "FAN2_FAIL", "FAN3_FAIL", "FAN4_FAIL", "FAN5_FAIL", "FAN6_FAIL",
+ "FAN7_FAIL", "FAN8_FAIL", "FAN9_FAIL", "FAN10_FAIL", "FAN11_FAIL",
+ "FAN12_FAIL", "FAN13_FAIL", "FAN14_FAIL", "FAN15_FAIL", "FAN16_FAIL",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "IDENTIFY", "HEALTH_RED", "HEALTH_AMBER", "POWER_BUTTON",
+ "", "SIO_POWER_GOOD", "NMI_BUTTON", "RESET_BUTTON", "SIO_S5",
+ "SIO_ONCONTROL", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "";
+ fan1 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x01>;
+ };
+ fan2 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x02>;
+ };
+ fan3 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x04>;
+ };
+ fan4 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x08>;
+ };
+ fan5 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x10>;
+ };
+ fan6 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x40>;
+ };
+ fan7 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x40>;
+ };
+ fan8 {
+ inst = <0x27>;
+ fail = <0x29>;
+ id = <0x2B>;
+ bit = <0x80>;
+ };
+ fan9 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x01>;
+ };
+ fan10 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x02>;
+ };
+ fan11 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x04>;
+ };
+ fan12 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x08>;
+ };
+ fan13 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x10>;
+ };
+ fan14 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x20>;
+ };
+ fan15 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x40>;
+ };
+ fan16 {
+ inst = <0x28>;
+ fail = <0x2A>;
+ id = <0x2C>;
+ bit = <0x80>;
+ };
+ healthled {
+ red = <0x0D 0x20>;
+ amber = <0x0D 0x30>;
+ green = <0x0D 0x10>;
+ };
+ iopled1 {
+ on = <0x04 0x01>;
+ };
+ iopled2 {
+ on = <0x04 0x02>;
+ };
+ iopled3 {
+ on = <0x04 0x04>;
+ };
+ iopled4 {
+ on = <0x04 0x08>;
+ };
+ iopled5 {
+ on = <0x04 0x10>;
+ };
+ iopled6 {
+ on = <0x04 0x20>;
+ };
+ iopled7 {
+ on = <0x04 0x40>;
+ };
+ iopled8 {
+ on = <0x04 0x80>;
+ };
+ identifyled {
+ on = <0x05 0xC0>;
+ off = <0x05 0x40>;
+ };
+ acm {
+ forceoff = <0x0A 0x01>;
+ removed = <0x0A 0x02>;
+ unlatchreq = <0x0A 0x04>;
+ };
+ serverid {
+ lower = <0x01 0xFF>;
+ upper = <0x02 0xFF>;
+ };
+ sideband {
+ disabled = <0x40 0x03>;
+ embedded = <0x40 0x02>;
+ adaptive = <0x40 0x01>;
+ };
+ grp5intflag {
+ ack = <0xB0 0xFF>;
+ pwrbtn = <0xB0 0x01>;
+ uidpress = <0xB0 0x02>;
+ slpint = <0xB0 0x04>;
+ };
+ grp5intmask {
+ pwrbtn = <0xB1 0x01>;
+ slpint = <0xB1 0x40>;
+ };
+ grpintsmasks {
+ grp5 = <0x88 0x10>;
+ };
+ grpintsflags {
+ grp5 = <0x8C 0x10>;
+ };
+ pwrbtn {
+ latch = <0x0F 0xFF 0x04>;
+ };
};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..96003667bebe 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -56,9 +56,28 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xc0000000 0x30000000>;
+ ranges = <0x0 0xc0000000 0x40000000>;
dma-ranges;

+ spifi: spi@200 {
+ compatible = "hpe,gxp-spifi";
+ reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x8000000>;
+ interrupts = <20>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ };
+
+ flash@1 {
+ reg = <1>;
+ compatible = "jedec,spi-nor";
+ };
+ };
+
vic0: interrupt-controller@eff0000 {
compatible = "arm,pl192-vic";
reg = <0xeff0000 0x1000>;
@@ -122,6 +141,13 @@
interrupts = <6>;
interrupt-parent = <&vic0>;
};
+
+ plreg: plreg@d1000000 {
+ compatible = "hpe,gxp-plreg", "simple-mfd", "syscon";
+ reg = <0xd1000000 0xff>;
+ interrupts = <26>;
+ interrupt-parent = <&vic0>;
+ };
};
};
};
--
2.17.1
\
 
 \ /
  Last update: 2022-10-11 20:57    [W:0.090 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site