lkml.org 
[lkml]   [2022]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
From
On 12/10/2022 03:44, Rajat Khandelwal wrote:
> The datasheet states that the slave address for the device is 0x20
> when the pins A0 and A1 are ground. The DT binding has been using
> 0x10 as the value and I think it should be 0x20 as per datasheet.
>
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
> ---
>
> v2:
> 1. Subject prefix added
> 2. DT bindings validated

No, still wrong. Nothing was validated.

>
> Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> index 264fa7c5fe3a..1955b1a97cd6 100644
> --- a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> @@ -38,7 +38,7 @@ examples:
>
> dac@10 {
> compatible = "maxim,ds4424";
> - reg = <0x10>; /* When A0, A1 pins are ground */
> + reg = <0x20>; /* When A0, A1 pins are ground */

Nothing improved here.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-10-11 14:11    [W:0.031 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site