Messages in this thread | | | Date | Thu, 6 Jan 2022 15:35:59 -0800 | From | Bjorn Andersson <> | Subject | Re: [Patch v3 2/3] arm64: dts: qcom: sm8150: Add support for LMh node |
| |
On Thu 06 Jan 09:31 PST 2022, Thara Gopinath wrote:
> Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC. > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Daniel, will you please apply patch 1 and 3 through your tree and I can take this through the qcom dts tree.
Thanks, Bjorn
> --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 81b4ff2cc4cd..e755d7ab78dd 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -3650,6 +3650,30 @@ cpufreq_hw: cpufreq@18323000 { > #freq-domain-cells = <1>; > }; > > + lmh_cluster1: lmh@18350800 { > + compatible = "qcom,sm8150-lmh"; > + reg = <0 0x18350800 0 0x400>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&CPU4>; > + qcom,lmh-temp-arm-millicelsius = <60000>; > + qcom,lmh-temp-low-millicelsius = <84500>; > + qcom,lmh-temp-high-millicelsius = <85000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > + lmh_cluster0: lmh@18358800 { > + compatible = "qcom,sm8150-lmh"; > + reg = <0 0x18358800 0 0x400>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&CPU0>; > + qcom,lmh-temp-arm-millicelsius = <60000>; > + qcom,lmh-temp-low-millicelsius = <84500>; > + qcom,lmh-temp-high-millicelsius = <85000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > wifi: wifi@18800000 { > compatible = "qcom,wcn3990-wifi"; > reg = <0 0x18800000 0 0x800000>; > -- > 2.25.1 >
| |