lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v3 2/3] arm64: dts: qcom: sm8150: Add support for LMh node
Date
Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 81b4ff2cc4cd..e755d7ab78dd 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3650,6 +3650,30 @@ cpufreq_hw: cpufreq@18323000 {
#freq-domain-cells = <1>;
};

+ lmh_cluster1: lmh@18350800 {
+ compatible = "qcom,sm8150-lmh";
+ reg = <0 0x18350800 0 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ cpus = <&CPU4>;
+ qcom,lmh-temp-arm-millicelsius = <60000>;
+ qcom,lmh-temp-low-millicelsius = <84500>;
+ qcom,lmh-temp-high-millicelsius = <85000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ lmh_cluster0: lmh@18358800 {
+ compatible = "qcom,sm8150-lmh";
+ reg = <0 0x18358800 0 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ cpus = <&CPU0>;
+ qcom,lmh-temp-arm-millicelsius = <60000>;
+ qcom,lmh-temp-low-millicelsius = <84500>;
+ qcom,lmh-temp-high-millicelsius = <85000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0 0x18800000 0 0x800000>;
--
2.25.1
\
 
 \ /
  Last update: 2022-01-06 18:33    [W:0.092 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site