lkml.org 
[lkml]   [2022]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 24/24] dt-bindings: pinctrl: samsung: convert to dtschema
On Fri, 31 Dec 2021 at 18:23, Krzysztof Kozlowski
<krzysztof.kozlowski@canonical.com> wrote:
>
> Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
> controller bindings to DT schema format. Parts of description and DTS
> example was copied from existing sources, so keep the license as
> GPL-2.0-only.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

Kudos for doing that, converting and splitting. It's fascinating how
time consuming that bindings conversion work can be (at least for me,
hehe).

> .../pinctrl/samsung,pinctrl-gpio-bank.yaml | 52 +++
> .../pinctrl/samsung,pinctrl-pins-cfg.yaml | 81 ++++
> .../samsung,pinctrl-wakeup-interrupt.yaml | 76 ++++
> .../bindings/pinctrl/samsung,pinctrl.yaml | 381 +++++++++++++++++
> .../bindings/pinctrl/samsung-pinctrl.txt | 383 ------------------
> MAINTAINERS | 2 +-
> 6 files changed, 591 insertions(+), 384 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> new file mode 100644
> index 000000000000..f73348c54748
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> + - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> +properties:
> + '#gpio-cells':
> + const: 2
> +
> + gpio-controller: true
> +
> + '#interrupt-cells':
> + description:
> + For GPIO banks supporting external GPIO interrupts or external wake-up
> + interrupts.
> + const: 2
> +
> + interrupt-controller:
> + description:
> + For GPIO banks supporting external GPIO interrupts or external wake-up
> + interrupts.
> +
> + interrupts:
> + description:
> + For GPIO banks supporting direct external wake-up interrupts (without
> + multiplexing). Number of interrupts must match number of wake-up capable
> + pins of this bank.
> + minItems: 1
> + maxItems: 8
> +
> +required:
> + - '#gpio-cells'
> + - gpio-controller
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> new file mode 100644
> index 000000000000..637f4c05b344
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> + - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> + The values used for config properties should be derived from the hardware
> + manual and these values are programmed as-is into the pin pull up/down and
> + driver strength register of the pin-controller.
> + See also include/dt-bindings/pinctrl/samsung.h with useful constants.
> +
> +properties:
> + samsung,pins:
> + description: |
> + List of pins to configure. For initial and sleep states, the maximum
> + number is one pin. In other cases there is no upper limit.
> +
> + The pins should use lowercase names matching hardware manual, e.g. for
> + GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
> + $ref: /schemas/types.yaml#/definitions/string-array
> +
> + samsung,pin-function:
> + description: |
> + The pin function selection that should be applied on the pins listed in the
> + child node is specified using the "samsung,pin-function" property. The value
> + of this property that should be applied to each of the pins listed in the
> + "samsung,pins" property should be picked from the hardware manual of the SoC
> + for the specified pin group. This property is optional in the child node if
> + no specific function selection is desired for the pins listed in the child
> + node. The value of this property is used as-is to program the pin-controller
> + function selector register of the pin-bank.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
> +
> + samsung,pin-drv:
> + description: Drive strength configuration.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
> +
> + samsung,pin-pud:
> + description: Pull up/down configuration.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + samsung,pin-val:
> + description: Initial value of pin output buffer.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> +
> + samsung,pin-con-pdn:
> + description: Function in power down mode.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + samsung,pin-pud-pdn:
> + description: Pull up/down configuration in power down mode.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> +required:
> + - samsung,pins
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> new file mode 100644
> index 000000000000..eac56a087643
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - wakeup interrupt controller
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> + - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
> + Only one pin-controller device node can include external wakeup interrupts
> + child node (in other words, only one External wake-up interrupts
> + pin-controller is supported).
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,s3c2410-wakeup-eint
> + - samsung,s3c2412-wakeup-eint
> + - samsung,s3c64xx-wakeup-eint
> + - samsung,s5pv210-wakeup-eint
> + - samsung,exynos4210-wakeup-eint
> + - samsung,exynos7-wakeup-eint
> +
> + interrupts:
> + description:
> + Interrupt used by multiplexed external wake-up interrupts.
> + minItems: 1
> + maxItems: 6
> +
> +required:
> + - compatible
> + - interrupts
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,s3c2410-wakeup-eint
> + - samsung,s3c2412-wakeup-eint
> + then:
> + properties:
> + interrupts:
> + minItems: 6
> + maxItems: 6
> + else:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,s3c64xx-wakeup-eint
> + then:
> + properties:
> + interrupts:
> + minItems: 4
> + maxItems: 4
> + else:
> + properties:
> + interrupts:
> + minItems: 1
> + maxItems: 1
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> new file mode 100644
> index 000000000000..37cd03805cab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> @@ -0,0 +1,381 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> + - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + Pin group settings (like drive strength, pull up/down) are available as
> + macros in include/dt-bindings/pinctrl/samsung.h.
> +
> + All the pin controller nodes should be represented in the aliases node using
> + the following format 'pinctrl{n}' where n is a unique number for the alias.
> +
> +properties:
> + $nodename:
> + pattern: "^pinctrl(@.*)?"
> +
> + compatible:
> + enum:
> + - samsung,s3c2412-pinctrl
> + - samsung,s3c2416-pinctrl
> + - samsung,s3c2440-pinctrl
> + - samsung,s3c2450-pinctrl
> + - samsung,s3c64xx-pinctrl
> + - samsung,s5pv210-pinctrl
> + - samsung,exynos3250-pinctrl
> + - samsung,exynos4210-pinctrl
> + - samsung,exynos4x12-pinctrl
> + - samsung,exynos5250-pinctrl
> + - samsung,exynos5260-pinctrl
> + - samsung,exynos5410-pinctrl
> + - samsung,exynos5420-pinctrl
> + - samsung,exynos5433-pinctrl
> + - samsung,exynos7-pinctrl
> + - samsung,exynos7885-pinctrl
> + - samsung,exynos850-pinctrl
> + - samsung,exynosautov9-pinctrl
> +
> + interrupts:
> + description:
> + Required for GPIO banks supporting external GPIO interrupts.
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + reg:
> + description:
> + Second base address of the pin controller if the specific registers of
> + the pin controller are separated into the different base address.
> + Only certain banks of certain pin controller might need it.
> + minItems: 1
> + maxItems: 2
> +
> + wakeup-interrupt-controller:
> + $ref: samsung,pinctrl-wakeup-interrupt.yaml
> +
> +patternProperties:
> + "^[a-z]+[0-9]*-gpio-bank$":
> + description:
> + Pin banks of the controller are represented by child nodes of the
> + controller node. Bank name is taken from name of the node.
> + $ref: samsung,pinctrl-gpio-bank.yaml
> +
> + "^[a-z0-9-]+-pins$":
> + oneOf:
> + - $ref: samsung,pinctrl-pins-cfg.yaml
> + required:
> + - samsung,pins
> + - type: object
> + patternProperties:
> + "^[a-z0-9-]+-pins$":
> + $ref: samsung,pinctrl-pins-cfg.yaml
> +
> + additionalProperties: false
> +
> + "^(initial|sleep)-state$":
> + patternProperties:
> + "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
> + $ref: samsung,pinctrl-pins-cfg.yaml
> +
> + properties:
> + samsung,pins:
> + description: See samsung,pinctrl-pins-cfg.yaml
> + $ref: /schemas/types.yaml#/definitions/string-array
> + maxItems: 1
> +
> + required:
> + - samsung,pins
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - $ref: "pinctrl.yaml#"
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos5433-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 1
> + maxItems: 2
> + else:
> + properties:
> + reg:
> + minItems: 1
> + maxItems: 1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@7f008000 {
> + compatible = "samsung,s3c64xx-pinctrl";
> + reg = <0x7f008000 0x1000>;
> + interrupt-parent = <&vic1>;
> + interrupts = <21>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,s3c64xx-wakeup-eint";
> + interrupts-extended = <&vic0 0>,
> + <&vic0 1>,
> + <&vic1 0>,
> + <&vic1 1>;
> + };
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpa-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + uart0-data-pins {
> + samsung,pins = "gpa-0", "gpa-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
> + };
> +
> + // ...
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@11400000 {
> + compatible = "samsung,exynos4210-pinctrl";
> + reg = <0x11400000 0x1000>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sleep0>;
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpa0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + uart0-data-pins {
> + samsung,pins = "gpa0-0", "gpa0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +
> + // ...
> +
> + sleep0: sleep-state {
> + gpa0-0-pin {
> + samsung,pins = "gpa0-0";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + gpa0-1-pin {
> + samsung,pins = "gpa0-1";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + // ...
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@11000000 {
> + compatible = "samsung,exynos4210-pinctrl";
> + reg = <0x11000000 0x1000>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos4210-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpj0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + /* Pin bank without external interrupts */
> + gpy0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + /* Pin bank with external direct wake-up interrupts */
> + gpx0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + sd0-clk-pins {
> + samsung,pins = "gpk0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> +
> + sd4-bus-width8-pins {
> + part-1-pins {
> + samsung,pins = "gpk0-3", "gpk0-4",
> + "gpk0-5", "gpk0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> +
> + part-2-pins {
> + samsung,pins = "gpk1-3", "gpk1-4",
> + "gpk1-5", "gpk1-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> + };
> +
> + // ...
> +
> + otg-gp-pins {
> + samsung,pins = "gpx3-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + samsung,pin-val = <0>;
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@10580000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos7-wakeup-eint";
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* Pin bank with external direct wake-up interrupts */
> + gpa0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + te-irq-pins {
> + samsung,pins = "gpf1-3";
> + samsung,pin-function = <0xf>;
> + };
> +
> + // ..
> +
> + initial_alive: initial-state {
> + gpa0-0-pin {
> + samsung,pins = "gpa0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
> + };
> +
> + // ...
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@114b0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x114b0000 0x1000>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&pd_aud>;
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpz0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + i2s0-bus-pins {
> + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
> + "gpz0-4", "gpz0-5", "gpz0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
> + };
> +
> + // ...
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> deleted file mode 100644
> index 9e70edceb21b..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ /dev/null
> @@ -1,383 +0,0 @@
> -Samsung GPIO and Pin Mux/Config controller
> -
> -Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
> -controller. It controls the input/output settings on the available pads/pins
> -and also provides ability to multiplex and configure the output of various
> -on-chip controllers onto these pads.
> -
> -Required Properties:
> -- compatible: should be one of the following.
> - - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
> - - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
> - - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
> - - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
> - - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
> - - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
> - - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
> - - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
> - - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
> - - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
> - - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
> - - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
> - - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
> - - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
> - - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
> - - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
> - - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
> - - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
> -
> -- reg: Base address of the pin controller hardware module and length of
> - the address space it occupies.
> -
> - - reg: Second base address of the pin controller if the specific registers
> - of the pin controller are separated into the different base address.
> -
> - Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
> - - First base address is for GPAx and GPF[1-5] external interrupt
> - registers.
> - - Second base address is for GPF[1-5] pinctrl registers.
> -
> - pinctrl_0: pinctrl@10580000 {
> - compatible = "samsung,exynos5433-pinctrl";
> - reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> -
> - wakeup-interrupt-controller {
> - compatible = "samsung,exynos7-wakeup-eint";
> - interrupts = <0 16 0>;
> - };
> - };
> -
> -- Pin banks as child nodes: Pin banks of the controller are represented by child
> - nodes of the controller node. Bank name is taken from name of the node. Each
> - bank node must contain following properties:
> -
> - - gpio-controller: identifies the node as a gpio controller and pin bank.
> - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
> - binding is used, the amount of cells must be specified as 2. See the below
> - mentioned gpio binding representation for description of particular cells.
> -
> - Eg: <&gpx2 6 0>
> - <[phandle of the gpio controller node]
> - [pin number within the gpio controller]
> - [flags]>
> -
> - Values for gpio specifier:
> - - Pin number: is a value between 0 to 7.
> - - Flags: 0 - Active High
> - 1 - Active Low
> -
> -- Pin mux/config groups as child nodes: The pin mux (selecting pin function
> - mode) and pin config (pull up/down, driver strength) settings are represented
> - as child nodes of the pin-controller node. There should be at least one
> - child node and there is no limit on the count of these child nodes. It is
> - also possible for a child node to consist of several further child nodes
> - to allow grouping multiple pinctrl groups into one. The format of second
> - level child nodes is exactly the same as for first level ones and is
> - described below.
> -
> - The child node should contain a list of pin(s) on which a particular pin
> - function selection or pin configuration (or both) have to applied. This
> - list of pins is specified using the property name "samsung,pins". There
> - should be at least one pin specified for this property and there is no upper
> - limit on the count of pins that can be specified. The pins are specified
> - using pin names which are derived from the hardware manual of the SoC. As
> - an example, the pins in GPA0 bank of the pin controller can be represented
> - as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
> - The format of the pin names should be (as per the hardware manual)
> - "[pin bank name]-[pin number within the bank]".
> -
> - The pin function selection that should be applied on the pins listed in the
> - child node is specified using the "samsung,pin-function" property. The value
> - of this property that should be applied to each of the pins listed in the
> - "samsung,pins" property should be picked from the hardware manual of the SoC
> - for the specified pin group. This property is optional in the child node if
> - no specific function selection is desired for the pins listed in the child
> - node. The value of this property is used as-is to program the pin-controller
> - function selector register of the pin-bank.
> -
> - The child node can also optionally specify one or more of the pin
> - configuration that should be applied on all the pins listed in the
> - "samsung,pins" property of the child node. The following pin configuration
> - properties are supported.
> -
> - - samsung,pin-val: Initial value of pin output buffer.
> - - samsung,pin-pud: Pull up/down configuration.
> - - samsung,pin-drv: Drive strength configuration.
> - - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
> - - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
> -
> - The values specified by these config properties should be derived from the
> - hardware manual and these values are programmed as-is into the pin
> - pull up/down and driver strength register of the pin-controller.
> -
> - Note: A child should include at least a pin function selection property or
> - pin configuration property (one or more) or both.
> -
> - The client nodes that require a particular pin function selection and/or
> - pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
> - file.
> -
> -External GPIO and Wakeup Interrupts:
> -
> -The controller supports two types of external interrupts over gpio. The first
> -is the external gpio interrupt and second is the external wakeup interrupts.
> -The difference between the two is that the external wakeup interrupts can be
> -used as system wakeup events.
> -
> -A. External GPIO Interrupts: For supporting external gpio interrupts, the
> - following properties should be specified in the pin-controller device node.
> -
> - - interrupts: interrupt specifier for the controller. The format and value of
> - the interrupt specifier depends on the interrupt parent for the controller.
> -
> - In addition, following properties must be present in node of every bank
> - of pins supporting GPIO interrupts:
> -
> - - interrupt-controller: identifies the controller node as interrupt-parent.
> - - #interrupt-cells: the value of this property should be 2.
> - - First Cell: represents the external gpio interrupt number local to the
> - external gpio interrupt space of the controller.
> - - Second Cell: flags to identify the type of the interrupt
> - - 1 = rising edge triggered
> - - 2 = falling edge triggered
> - - 3 = rising and falling edge triggered
> - - 4 = high level triggered
> - - 8 = low level triggered
> -
> -B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
> - child node representing the external wakeup interrupt controller should be
> - included in the pin-controller device node.
> -
> - Only one pin-controller device node can include external wakeup interrupts
> - child node (in other words, only one External Wakeup Interrupts
> - pin-controller is supported).
> -
> - This child node should include following properties:
> -
> - - compatible: identifies the type of the external wakeup interrupt controller
> - The possible values are:
> - - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
> - - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C2412 and S3C2413 SoCs,
> - - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C64xx SoCs,
> - - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S5Pv210 SoCs,
> - - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
> - - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung Exynos7 SoC.
> - - interrupts: interrupt used by multiplexed wakeup interrupts.
> -
> - In addition, following properties must be present in node of every bank
> - of pins supporting wake-up interrupts:
> -
> - - interrupt-controller: identifies the node as interrupt-parent.
> - - #interrupt-cells: the value of this property should be 2
> - - First Cell: represents the external wakeup interrupt number local to
> - the external wakeup interrupt space of the controller.
> - - Second Cell: flags to identify the type of the interrupt
> - - 1 = rising edge triggered
> - - 2 = falling edge triggered
> - - 3 = rising and falling edge triggered
> - - 4 = high level triggered
> - - 8 = low level triggered
> -
> - Node of every bank of pins supporting direct wake-up interrupts (without
> - multiplexing) must contain following properties:
> -
> - - interrupts: interrupts of the interrupt parent which are used for external
> - wakeup interrupts from pins of the bank, must contain interrupts for all
> - pins of the bank.
> -
> -Aliases:
> -
> -All the pin controller nodes should be represented in the aliases node using
> -the following format 'pinctrl{n}' where n is a unique number for the alias.
> -
> -Aliases for controllers compatible with "samsung,exynos7-pinctrl":
> -- pinctrl0: pin controller of ALIVE block,
> -- pinctrl1: pin controller of BUS0 block,
> -- pinctrl2: pin controller of NFC block,
> -- pinctrl3: pin controller of TOUCH block,
> -- pinctrl4: pin controller of FF block,
> -- pinctrl5: pin controller of ESE block,
> -- pinctrl6: pin controller of FSYS0 block,
> -- pinctrl7: pin controller of FSYS1 block,
> -- pinctrl8: pin controller of BUS1 block,
> -- pinctrl9: pin controller of AUDIO block,
> -
> -Example: A pin-controller node with pin banks:
> -
> - pinctrl_0: pinctrl@11400000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11400000 0x1000>;
> - interrupts = <0 47 0>;
> -
> - /* ... */
> -
> - /* Pin bank without external interrupts */
> - gpy0: gpy0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - /* ... */
> -
> - /* Pin bank with external GPIO or muxed wake-up interrupts */
> - gpj0: gpj0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - /* ... */
> -
> - /* Pin bank with external direct wake-up interrupts */
> - gpx0: gpx0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - interrupt-parent = <&gic>;
> - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
> - #interrupt-cells = <2>;
> - };
> -
> - /* ... */
> - };
> -
> -Example 1: A pin-controller node with pin groups.
> -
> - #include <dt-bindings/pinctrl/samsung.h>
> -
> - pinctrl_0: pinctrl@11400000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11400000 0x1000>;
> - interrupts = <0 47 0>;
> -
> - /* ... */
> -
> - uart0_data: uart0-data {
> - samsung,pins = "gpa0-0", "gpa0-1";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart0_fctl: uart0-fctl {
> - samsung,pins = "gpa0-2", "gpa0-3";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart1_data: uart1-data {
> - samsung,pins = "gpa0-4", "gpa0-5";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart1_fctl: uart1-fctl {
> - samsung,pins = "gpa0-6", "gpa0-7";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - i2c2_bus: i2c2-bus {
> - samsung,pins = "gpa0-6", "gpa0-7";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - sd4_bus8: sd4-bus-width8 {
> - part-1 {
> - samsung,pins = "gpk0-3", "gpk0-4",
> - "gpk0-5", "gpk0-6";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> - };
> - part-2 {
> - samsung,pins = "gpk1-3", "gpk1-4",
> - "gpk1-5", "gpk1-6";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> - };
> - };
> - };
> -
> -Example 2: A pin-controller node with external wakeup interrupt controller node.
> -
> - pinctrl_1: pinctrl@11000000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11000000 0x1000>;
> - interrupts = <0 46 0>
> -
> - /* ... */
> -
> - wakeup-interrupt-controller {
> - compatible = "samsung,exynos4210-wakeup-eint";
> - interrupt-parent = <&gic>;
> - interrupts = <0 32 0>;
> - };
> - };
> -
> -Example 3: A uart client node that supports 'default' and 'flow-control' states.
> -
> - uart@13800000 {
> - compatible = "samsung,exynos4210-uart";
> - reg = <0x13800000 0x100>;
> - interrupts = <0 52 0>;
> - pinctrl-names = "default", "flow-control;
> - pinctrl-0 = <&uart0_data>;
> - pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
> - };
> -
> -Example 4: Set up the default pin state for uart controller.
> -
> - static int s3c24xx_serial_probe(struct platform_device *pdev) {
> - struct pinctrl *pinctrl;
> -
> - /* ... */
> -
> - pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> - }
> -
> -Example 5: A display port client node that supports 'default' pinctrl state
> - and gpio binding.
> -
> - display-port-controller {
> - /* ... */
> -
> - samsung,hpd-gpio = <&gpx2 6 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&dp_hpd>;
> - };
> -
> -Example 6: Request the gpio for display port controller
> -
> - static int exynos_dp_probe(struct platform_device *pdev)
> - {
> - int hpd_gpio, ret;
> - struct device *dev = &pdev->dev;
> - struct device_node *dp_node = dev->of_node;
> -
> - /* ... */
> -
> - hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
> -
> - /* ... */
> -
> - ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
> - "hpd_gpio");
> - /* ... */
> - }
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5ea5655a29c3..33005c10e956 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15242,7 +15242,7 @@ L: linux-samsung-soc@vger.kernel.org
> S: Maintained
> Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
> -F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
> F: drivers/pinctrl/samsung/
> F: include/dt-bindings/pinctrl/samsung.h
>
> --
> 2.32.0
>

\
 
 \ /
  Last update: 2022-01-03 22:21    [W:0.187 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site