lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: stm32-dcmi: create video dev once sensor is binded
Date
In case of an error during the initialization of the sensor,
the video device is still available since created at the
probe of the dcmi driver. Moreover the device wouldn't
be released even when removing the module since the release
is performed as part of the notifier unbind callback
(not called if no sensor is properly initialized).

This patch move the video device creation with the v4l2 notifier
complete handler in order to avoid having a video device created when
an error happen during the pipe (dcmi - sensor) initialization.

This also makes the video device creation symmetric with the
release which is already done within the notifier unbind handler.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
v1: this patch is the replacement patch of a previous attempt [1]
to move the register within the bound callback.

[1] https://lore.kernel.org/linux-media/31ca9ccc-77d4-4368-1024-db70e8e1e7f2@xs4all.nl/
drivers/media/platform/stm32/stm32-dcmi.c | 69 ++++++++++++-----------
1 file changed, 35 insertions(+), 34 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index e1b17c05229c..80d0fbeabb4f 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -134,6 +134,7 @@ struct stm32_dcmi {
struct video_device *vdev;
struct v4l2_async_notifier notifier;
struct v4l2_subdev *source;
+ struct v4l2_subdev *remote;
struct v4l2_format fmt;
struct v4l2_rect crop;
bool do_crop;
@@ -579,9 +580,9 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
spin_unlock_irq(&dcmi->irqlock);
}

-static struct media_entity *dcmi_find_source(struct stm32_dcmi *dcmi)
+static struct media_entity *dcmi_find_source(struct v4l2_subdev *subdev)
{
- struct media_entity *entity = &dcmi->vdev->entity;
+ struct media_entity *entity = &subdev->entity;
struct media_pad *pad;

/* Walk searching for entity having no sink */
@@ -1721,6 +1722,7 @@ static int dcmi_framesizes_init(struct stm32_dcmi *dcmi)
static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
{
struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
+ int src_pad;
int ret;

/*
@@ -1728,7 +1730,7 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
* we search for the source subdevice
* in order to expose it through V4L2 interface
*/
- dcmi->source = media_entity_to_v4l2_subdev(dcmi_find_source(dcmi));
+ dcmi->source = media_entity_to_v4l2_subdev(dcmi_find_source(dcmi->remote));
if (!dcmi->source) {
dev_err(dcmi->dev, "Source subdevice not found\n");
return -ENODEV;
@@ -1768,6 +1770,34 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
return ret;
}

+ ret = video_register_device(dcmi->vdev, VFL_TYPE_VIDEO, -1);
+ if (ret) {
+ dev_err(dcmi->dev, "Failed to register video device\n");
+ return ret;
+ }
+
+ dev_dbg(dcmi->dev, "Device registered as %s\n",
+ video_device_node_name(dcmi->vdev));
+
+ /*
+ * Link remote sub-device to DCMI, it could be
+ * a parallel camera sensor or a bridge
+ */
+ src_pad = media_entity_get_fwnode_pad(&dcmi->remote->entity,
+ dcmi->remote->fwnode,
+ MEDIA_PAD_FL_SOURCE);
+
+ ret = media_create_pad_link(&dcmi->remote->entity, src_pad,
+ &dcmi->vdev->entity, 0,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ dev_err(dcmi->dev, "Failed to create media pad link with subdev \"%s\"\n",
+ dcmi->remote->name);
+ else
+ dev_dbg(dcmi->dev, "DCMI is now linked to \"%s\"\n",
+ dcmi->remote->name);
+
return 0;
}

@@ -1788,31 +1818,11 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
struct v4l2_async_subdev *asd)
{
struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
- unsigned int ret;
- int src_pad;

dev_dbg(dcmi->dev, "Subdev \"%s\" bound\n", subdev->name);
+ dcmi->remote = subdev;

- /*
- * Link this sub-device to DCMI, it could be
- * a parallel camera sensor or a bridge
- */
- src_pad = media_entity_get_fwnode_pad(&subdev->entity,
- subdev->fwnode,
- MEDIA_PAD_FL_SOURCE);
-
- ret = media_create_pad_link(&subdev->entity, src_pad,
- &dcmi->vdev->entity, 0,
- MEDIA_LNK_FL_IMMUTABLE |
- MEDIA_LNK_FL_ENABLED);
- if (ret)
- dev_err(dcmi->dev, "Failed to create media pad link with subdev \"%s\"\n",
- subdev->name);
- else
- dev_dbg(dcmi->dev, "DCMI is now linked to \"%s\"\n",
- subdev->name);
-
- return ret;
+ return 0;
}

static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = {
@@ -2008,15 +2018,6 @@ static int dcmi_probe(struct platform_device *pdev)
}
dcmi->vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;

- ret = video_register_device(dcmi->vdev, VFL_TYPE_VIDEO, -1);
- if (ret) {
- dev_err(dcmi->dev, "Failed to register video device\n");
- goto err_media_entity_cleanup;
- }
-
- dev_dbg(dcmi->dev, "Device registered as %s\n",
- video_device_node_name(dcmi->vdev));
-
/* Buffer queue */
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
--
2.25.1
\
 
 \ /
  Last update: 2022-01-27 12:18    [W:0.175 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site