lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 0/2] Bluetooth: hci_h5: btrtl: Add support for RTL8822CS hci_ver 0x08
From
Date
Hi Vyacheslav,

> Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar
> to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android set-top
> box and JetHome JetHub H1.
>
> While testing the RTL8822CS SDIO WiFi/BT adapter, I found that in some
> cases the kernel could not initialize it. However, manually resetting the
> adapter via gpio allows it to start correctly.
> Apparently at system start the adapter is in an undefined state (including
> the unknown state of gpio after starting uboot). A forced reset helps to
> initialize the adapter in most cases. Experimentally it was found that
> 100ms is enough to reset.
> So, add power reset via enable-gpios in h5_btrtl_open function.
>
> Changes from v6..v4:
> - fix patch description
> Changes from v3:
> - add has_msft_ext option
> Changes from v2:
> - align the patches for bluetooth-next
> Changes from v1:
> - remove Signed-off-by chbgdn <chbgdn@gmail.com> as not reachable
>
> Vyacheslav Bocharov (2):
> Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08
> Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_open
>
> drivers/bluetooth/btrtl.c | 8 ++++++++
> drivers/bluetooth/hci_h5.c | 5 +++++
> 2 files changed, 13 insertions(+)

both patches have been applied to bluetooth-next tree.

Regards

Marcel

\
 
 \ /
  Last update: 2022-01-26 14:41    [W:0.611 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site