lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 0/2] Bluetooth: hci_h5: btrtl: Add support for RTL8822CS hci_ver 0x08
From
Date

26.01.2022 16:40, Marcel Holtmann wrote:
> Hi Vyacheslav,
>
>> Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar
>> to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android set-top
>> box and JetHome JetHub H1.
>>
>> While testing the RTL8822CS SDIO WiFi/BT adapter, I found that in some
>> cases the kernel could not initialize it. However, manually resetting the
>> adapter via gpio allows it to start correctly.
>> Apparently at system start the adapter is in an undefined state (including
>> the unknown state of gpio after starting uboot). A forced reset helps to
>> initialize the adapter in most cases. Experimentally it was found that
>> 100ms is enough to reset.
>> So, add power reset via enable-gpios in h5_btrtl_open function.
>>
>> Changes from v6..v4:
>> - fix patch description
>> Changes from v3:
>> - add has_msft_ext option
>> Changes from v2:
>> - align the patches for bluetooth-next
>> Changes from v1:
>> - remove Signed-off-by chbgdn <chbgdn@gmail.com> as not reachable
>>
>> Vyacheslav Bocharov (2):
>> Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08
>> Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_open
>>
>> drivers/bluetooth/btrtl.c | 8 ++++++++
>> drivers/bluetooth/hci_h5.c | 5 +++++
>> 2 files changed, 13 insertions(+)
>
> both patches have been applied to bluetooth-next tree.

Thanks!

>
> Regards
>
> Marcel
>

\
 
 \ /
  Last update: 2022-01-26 15:15    [W:0.058 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site