lkml.org 
[lkml]   [2022]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtc: pcf2127: add error message if writing to CLKOUT register fails
On 19/01/2022 13:08:45-0500, Hugo Villeneuve wrote:
> On Wed, 19 Jan 2022 18:37:40 +0100
> Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
>
> > On 19/01/2022 12:27:39-0500, Hugo Villeneuve wrote:
> > > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > >
> > > If writing to CLKOUT register fails, the probe operation will be aborted
> > > without a meaningful error message.
> > >
> >
> > The current trend is to remove debug messages, please do not add more :)
>
> Hi,
> If the read operation fails, the probe function will exit silently, and our RTC chip will not work. In that case, if we parse the dmesg logs, I think we should have an indication that something went wrong.
>

This is not true, it doesn't fail silently, you'd get:
rtc-pcf2127: probe of 1-0051 failed with error -121

> I had a case where my dev board was not properly plugged-in, and before this patch, I didn't notice it because of the silent abort of the probe function.
>

Again, not silent.

> >
> > > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > > ---
> > > drivers/rtc/rtc-pcf2127.c | 4 +++-
> > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > > index 3d1f57e54372..823abe2a7147 100644
> > > --- a/drivers/rtc/rtc-pcf2127.c
> > > +++ b/drivers/rtc/rtc-pcf2127.c
> > > @@ -717,8 +717,10 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> > > if (!(val & PCF2127_BIT_CLKOUT_OTPR)) {
> > > ret = regmap_set_bits(pcf2127->regmap, PCF2127_REG_CLKOUT,
> > > PCF2127_BIT_CLKOUT_OTPR);
> > > - if (ret < 0)
> > > + if (ret < 0) {
> > > + dev_err(dev, "writing to CLKOUT register failed\n");
> > > return ret;
> > > + }
> > >
> > > msleep(100);
> > > }
> > > --
> > > 2.30.2
> > >
> >
> > --
> > Alexandre Belloni, co-owner and COO, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
> >
>
>
> --
> Hugo Villeneuve <hugo@hugovil.com>

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2022-01-19 20:11    [W:0.069 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site