lkml.org 
[lkml]   [2022]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] usb: dwc3: Calculate REFCLKPER et. al. from reference clock
Date
This is a rework of patches 3-5 of [1]. It attempts to correctly program
REFCLKPER and REFCLK_FLADJ based on the reference clock frequency. Since
we no longer need a special property duplicating this configuration,
snps,ref-clock-period-ns is deprecated.

Please test this! Patches 3/4 in this series have the effect of
programming REFCLKPER and REFCLK_FLADJ on boards which already configure
the "ref" clock. I have build tested, but not much else.

[1] https://lore.kernel.org/linux-usb/20220114044230.2677283-1-robert.hancock@calian.com/

Changes in v2:
- Document clock members
- Also program GFLADJ.240MHZDECR
- Don't program GFLADJ if the version is < 2.50a
- Add snps,ref-clock-frequency-hz property for ACPI

Sean Anderson (7):
dt-bindings: usb: dwc3: Deprecate snps,ref-clock-period-ns
usb: dwc3: Get clocks individually
usb: dwc3: Calculate REFCLKPER based on reference clock
usb: dwc3: Program GFLADJ
usb: dwc3: Add snps,ref-clock-frequency-hz property for ACPI
arm64: dts: zynqmp: Move USB clocks to dwc3 node
arm64: dts: ipq6018: Use reference clock to set dwc3 period

.../devicetree/bindings/usb/snps,dwc3.yaml | 7 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 3 +-
.../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 4 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +-
drivers/usb/dwc3/core.c | 112 +++++++++++++++---
drivers/usb/dwc3/core.h | 17 ++-
6 files changed, 120 insertions(+), 27 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2022-01-19 01:25    [W:0.165 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site