lkml.org 
[lkml]   [2022]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5 6/8] KVM: VMX: enable IPI virtualization
On Fri, Dec 31, 2021, Zeng Guang wrote:
> +/* Tertiary Processor-Based VM-Execution Controls, word 3 */
> +#define VMX_FEATURE_IPI_VIRT (3*32 + 4) /* "" Enable IPI virtualization */
> #endif /* _ASM_X86_VMXFEATURES_H */
> diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
> index 38d414f64e61..78b0525dd991 100644
> --- a/arch/x86/kvm/vmx/capabilities.h
> +++ b/arch/x86/kvm/vmx/capabilities.h
> @@ -12,6 +12,7 @@ extern bool __read_mostly enable_ept;
> extern bool __read_mostly enable_unrestricted_guest;
> extern bool __read_mostly enable_ept_ad_bits;
> extern bool __read_mostly enable_pml;
> +extern bool __read_mostly enable_ipiv;
> extern int __read_mostly pt_mode;
>
> #define PT_MODE_SYSTEM 0
> @@ -283,6 +284,12 @@ static inline bool cpu_has_vmx_apicv(void)
> cpu_has_vmx_posted_intr();
> }
>
> +static inline bool cpu_has_vmx_ipiv(void)
> +{
> + return vmcs_config.cpu_based_3rd_exec_ctrl &
> + TERTIARY_EXEC_IPI_VIRT;

Unnecessary newline, that fits on a single line.

> +}
> +
> static inline bool cpu_has_vmx_flexpriority(void)
> {
> return cpu_has_vmx_tpr_shadow() &&
> diff --git a/arch/x86/kvm/vmx/posted_intr.c b/arch/x86/kvm/vmx/posted_intr.c
> index 1c94783b5a54..bd9c9a89726a 100644
> --- a/arch/x86/kvm/vmx/posted_intr.c
> +++ b/arch/x86/kvm/vmx/posted_intr.c
> @@ -85,11 +85,16 @@ static bool vmx_can_use_vtd_pi(struct kvm *kvm)
> irq_remapping_cap(IRQ_POSTING_CAP);
> }
>
> +static bool vmx_can_use_ipiv_pi(struct kvm *kvm)
> +{
> + return irqchip_in_kernel(kvm) && enable_apicv && enable_ipiv;

enable_ipiv should be cleared if !enable_apicv, i.e. the enable_apicv check
here should be unnecessary.

> +}
> +
> void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu)
> {
> struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
>
> - if (!vmx_can_use_vtd_pi(vcpu->kvm))
> + if (!(vmx_can_use_ipiv_pi(vcpu->kvm) || vmx_can_use_vtd_pi(vcpu->kvm)))

Purely because I am beyond terrible at reading !(A || B) and !(A && B), can we
write this as:

if (!vmx_can_use_ipiv_pi(vcpu->kvm) && !vmx_can_use_vtd_pi(vcpu->kvm))
return;

Or better, add a helper. We could even drop vmx_can_use_ipiv_pi() altogether, e.g.

static bool vmx_can_use_posted_interrupts(struct kvm *kvm)
{
return irqchip_in_kernel(kvm) &&
(enable_ipiv || vmx_can_use_vtd_pi(kvm));
}

Or with both helpers:

static bool vmx_can_use_posted_interrupts(struct kvm *kvm)
{
return vmx_can_use_ipiv_pi(kvm) || vmx_can_use_vtd_pi(kvm);
}

I don't think I have a strong preference over whether or not to drop
vmx_can_use_ipiv_pi(). I think it's marginally easier to read with the extra
helper?

> return;
>
> /* Set SN when the vCPU is preempted */
> @@ -147,7 +152,7 @@ int pi_pre_block(struct kvm_vcpu *vcpu)
> struct pi_desc old, new;
> struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
>
> - if (!vmx_can_use_vtd_pi(vcpu->kvm))
> + if (!(vmx_can_use_ipiv_pi(vcpu->kvm) || vmx_can_use_vtd_pi(vcpu->kvm)))
> return 0;
>
> WARN_ON(irqs_disabled());
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 5716db9704c0..2e65464d6dee 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -104,6 +104,9 @@ module_param(fasteoi, bool, S_IRUGO);
>
> module_param(enable_apicv, bool, S_IRUGO);
>
> +bool __read_mostly enable_ipiv = true;
> +module_param(enable_ipiv, bool, 0444);
> +
> /*
> * If nested=1, nested virtualization is supported, i.e., guests may use
> * VMX and be a hypervisor for its own guests. If nested=0, guests may not
> @@ -224,6 +227,11 @@ static const struct {
> };
>
> #define L1D_CACHE_ORDER 4
> +
> +/* PID(Posted-Interrupt Descriptor)-pointer table entry is 64-bit long */
> +#define MAX_PID_TABLE_ORDER get_order(KVM_MAX_VCPU_IDS * sizeof(u64))
> +#define PID_TABLE_ENTRY_VALID 1
> +
> static void *vmx_l1d_flush_pages;
>
> static int vmx_setup_l1d_flush(enum vmx_l1d_flush_state l1tf)
> @@ -2504,7 +2512,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> }
>
> if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_TERTIARY_CONTROLS) {
> - u64 opt3 = 0;
> + u64 opt3 = TERTIARY_EXEC_IPI_VIRT;
> u64 min3 = 0;
>
> if (adjust_vmx_controls_64(min3, opt3,
> @@ -3841,6 +3849,8 @@ static void vmx_update_msr_bitmap_x2apic(struct kvm_vcpu *vcpu)
> vmx_enable_intercept_for_msr(vcpu, X2APIC_MSR(APIC_TMCCT), MSR_TYPE_RW);
> vmx_disable_intercept_for_msr(vcpu, X2APIC_MSR(APIC_EOI), MSR_TYPE_W);
> vmx_disable_intercept_for_msr(vcpu, X2APIC_MSR(APIC_SELF_IPI), MSR_TYPE_W);
> + vmx_set_intercept_for_msr(vcpu, X2APIC_MSR(APIC_ICR),
> + MSR_TYPE_RW, !enable_ipiv);

Please align this, e.g.

vmx_set_intercept_for_msr(vcpu, X2APIC_MSR(APIC_ICR),
MSR_TYPE_RW, !enable_ipiv);

though I think I'd actually prefer we do:


if (enable_ipiv)
vmx_disable_intercept_for_msr(vcpu, X2APIC_MSR(APIC_ICR), MSR_TYPE_RW);

and just let it poke out. That makes it much more obvious that interception is
disabled when IPI virtualization is enabled. Using vmx_set_intercept_for_msr()
implies that it could go either way, but that's not true as vmx_reset_x2apic_msrs()
sets the bitmap to intercept all x2APIC MSRs.
> }
> }
>

\
 
 \ /
  Last update: 2022-01-13 22:49    [W:1.076 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site