lkml.org 
[lkml]   [2022]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] TTY/Serial driver changes for 5.17-rc1
The following changes since commit a7904a538933c525096ca2ccde1e60d0ee62c08e:

Linux 5.16-rc6 (2021-12-19 14:14:33 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.17-rc1

for you to fetch changes up to 93a770b7e16772530196674ffc79bb13fa927dc6:

serial: core: Keep mctrl register state and cached copy in sync (2022-01-06 16:01:48 +0100)

----------------------------------------------------------------
TTY/Serial driver updates for 5.17-rc1

Here is the big set of tty/serial driver updates for 5.17-rc1.

Nothing major in here, just lots of good updates and fixes, including:
- more tty core cleanups from Jiri as well as mxser driver
cleanups. This is the majority of the core diffstat
- tty documentation updates from Jiri
- platform_get_irq() updates
- various serial driver updates for new features and hardware
- fifo usage for 8250 console, reducing cpu load a lot
- LED fix for keyboards, long-time bugfix that went through many
revisions
- minor cleanups

All have been in linux-next for a while with no reported problems.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Abel Vesa (1):
dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching

Alyssa Ross (1):
serial: liteuart: fix MODULE_ALIAS

Andy Shevchenko (3):
serial: 8250_pci: Split out Pericom driver
serial: 8250_pericom: Use serial_dl_write() instead of open coded
tty: tty_io: Switch to vmalloc() fallback in case of TTY_NO_WRITE_SPLIT

Biju Das (2):
dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
dt-bindings: serial: renesas,sci: Document RZ/V2L SoC

Cai Huoqing (1):
tty: mips_ejtag_fdc: Make use of the helper function kthread_run_on_cpu()

Colin Ian King (1):
serial: 8250_pci: remove redundant assignment to tmp after the mask operation

Emil Renner Berthing (1):
serial: 8250_dw: Add StarFive JH7100 quirk

Fugang Duan (2):
tty: serial: imx: clear the RTSD status before enable the RTSD irq
tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()

Geert Uytterhoeven (3):
serial: sh-sci: Drop support for "sci_ick" clock
serial: sh-sci: Use dev_err_probe()
serial: sh-sci: Use devm_clk_get_optional()

Greg Kroah-Hartman (3):
Merge 5.16-rc4 into tty-next
Merge 5.16-rc6 into tty-next
Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"

Jacky Bai (1):
dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string

Jay Dolan (1):
serial: 8250_pericom: Re-enable higher baud rates

Jesse Taube (2):
dt-bindings: serial: fsl-lpuart: add i.MXRT1050 compatible
tty: serial: fsl_lpuart: Add i.MXRT1050 support

Jing Yao (1):
serial: 8250: replace snprintf in show functions with sysfs_emit

Jiri Slaby (51):
n_gsm: remove unused parameters from gsm_error()
tty: remove TTY_SOFT_SAK part from __do_SAK()
tty: remove tty NULL check from __do_SAK()
tty: clean up whitespace in __do_SAK()
tty: serial, join uport checks in uart_port_shutdown()
mxser: remove wait for sent from mxser_close_port
mxser: rename mxser_close_port() to mxser_stop_rx()
mxser: keep only !tty test in ISR
mxser: move MSR read to mxser_check_modem_status()
mxser: clean up tx handling in mxser_transmit_chars()
mxser: remove pointless xmit_buf checks
mxser: remove tty->driver_data NULL check
mxser: call stop_rx from mxser_shutdown_port()
mxser: don't flush buffer from mxser_close() directly
mxser: use tty_port_close() in mxser_close()
mxser: extract TX empty check from mxser_wait_until_sent()
mxser: use msleep_interruptible() in mxser_wait_until_sent()
mxser: clean up timeout handling in mxser_wait_until_sent()
mxser: don't throttle manually
mxser: remove tty parameter from mxser_receive_chars_new()
mxser: increase buf_overrun if tty_insert_flip_char() fails
mxser: add MOXA prefix to some PCI device IDs
mxser: move ids from pci_ids.h here
mxser: use PCI_DEVICE_DATA
tty: drivers/tty/, stop using tty_schedule_flip()
tty: the rest, stop using tty_schedule_flip()
tty: drop tty_schedule_flip()
tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl
tty: finish kernel-doc of tty_struct members
tty: add kernel-doc for tty_port
tty: add kernel-doc for tty_driver
tty: add kernel-doc for tty_operations
tty: add kernel-doc for tty_port_operations
tty: add kernel-doc for tty_ldisc_ops
tty: combine tty_operations triple docs into kernel-doc
tty: combine tty_ldisc_ops docs into kernel-doc
tty: reformat tty_struct::flags into kernel-doc
tty: reformat TTY_DRIVER_ flags into kernel-doc
tty: reformat kernel-doc in tty_port.c
tty: reformat kernel-doc in tty_io.c
tty: reformat kernel-doc in tty_ldisc.c
tty: reformat kernel-doc in tty_buffer.c
tty: fix kernel-doc in n_tty.c
tty: reformat kernel-doc in n_tty.c
tty: add kernel-doc for more tty_driver functions
tty: add kernel-doc for more tty_port functions
tty: move tty_ldisc docs to new Documentation/tty/
tty: make tty_ldisc docs up-to-date
tty: more kernel-doc for tty_ldisc
tty: add kernel-doc for tty_standard_install
Documentation: add TTY chapter

Lad Prabhakar (15):
dt-bindings: serial: renesas,scif: Make resets as a required property
dt-bindings: serial: renesas,sci: Document RZ/G2L SoC
serial: sh-sci: Add support to deassert/assert reset line
serial: altera: Use platform_get_irq_optional() to get the interrupt
serial: 8250_bcm7271: Use platform_get_irq() to get the interrupt
serial: 8250_bcm7271: Propagate error codes from brcmuart_probe()
serial: meson: Use platform_get_irq() to get the interrupt
serial: pxa: Use platform_get_irq() to get the interrupt
serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
serial: vt8500: Use platform_get_irq() to get the interrupt
serial: ar933x: Use platform_get_irq() to get the interrupt
serial: bcm63xx: Use platform_get_irq() to get the interrupt
serial: pmac_zilog: Use platform_get_irq() to get the interrupt
tty: goldfish: Use platform_get_irq() to get the interrupt
serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure

Lino Sanfilippo (1):
serial: amba-pl011: do not request memory region twice

Lizhi Hou (1):
tty: serial: uartlite: allow 64 bit address

Lukas Bulwahn (1):
arm: remove zte zx platform left-over

Lukas Wunner (6):
serial: Fix incorrect rs485 polarity on uart open
serial: 8250: Move Alpha-specific quirk out of the core
serial: pl010: Drop CR register reset on set_termios
serial: pl011: Drop CR register reset on set_termios
serial: pl011: Drop redundant DTR/RTS preservation on close/open
serial: core: Keep mctrl register state and cached copy in sync

Magnus Damm (2):
serial: sh-sci: Remove BREAK/FRAME/PARITY/OVERRUN printouts
serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2

Muhammad Usama Anjum (1):
serial: lantiq: store and compare return status correctly

Rob Herring (2):
serial: lantiq: Use platform_get_irq() to get the interrupt
serial: atmel: Use platform_get_irq() to get the interrupt

Sam Protsenko (3):
tty: serial: samsung: Remove USI initialization
tty: serial: samsung: Enable console as module
tty: serial: samsung: Fix console registration from module

Sherry Sun (1):
tty: serial: fsl_lpuart: add timeout for wait_event_interruptible in .shutdown()

Tudor Ambarus (2):
tty: serial: atmel: Check return code of dmaengine_submit()
tty: serial: atmel: Call dma_async_issue_pending()

Valentin Caron (4):
serial: stm32: move tx dma terminate DMA to shutdown
serial: stm32: rework TX DMA state condition
serial: stm32: fix flow control transfer in DMA mode
serial: stm32: correct loop for dma error handling

Wander Lairson Costa (1):
tty: serial: Use fifo in 8250 console driver

Xiang wangx (1):
tty/ldsem: Fix syntax errors in comments

Xianwei Zhao (1):
dt-bindings: serial: amlogic, meson-uart: support S4

Yanteng Si (1):
docs/driver-api: Replace a comma in the n_gsm.rst with a double colon

Yoshihiro Shimoda (2):
dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
tty: serial: sh-sci: Add support for R-Car Gen4

Yu Tu (1):
tty: serial: meson: Drop the legacy compatible strings and clock code

lianzhi chang (1):
tty: Fix the keyboard led light display problem

.../bindings/serial/amlogic,meson-uart.yaml | 2 +
.../devicetree/bindings/serial/fsl-lpuart.yaml | 8 +-
.../devicetree/bindings/serial/renesas,sci.yaml | 48 +-
.../devicetree/bindings/serial/renesas,scif.yaml | 15 +
Documentation/driver-api/serial/index.rst | 1 -
Documentation/driver-api/serial/n_gsm.rst | 8 +-
Documentation/driver-api/serial/tty.rst | 328 --------
Documentation/index.rst | 1 +
Documentation/tty/index.rst | 63 ++
Documentation/tty/n_tty.rst | 22 +
Documentation/tty/tty_buffer.rst | 46 +
Documentation/tty/tty_driver.rst | 128 +++
Documentation/tty/tty_internals.rst | 31 +
Documentation/tty/tty_ldisc.rst | 85 ++
Documentation/tty/tty_port.rst | 70 ++
Documentation/tty/tty_struct.rst | 81 ++
arch/alpha/kernel/srmcons.c | 2 +-
arch/arm/include/debug/pl01x.S | 7 -
drivers/accessibility/speakup/spk_ttyio.c | 4 +-
drivers/bluetooth/hci_ldisc.c | 5 +-
drivers/input/serio/serport.c | 5 +-
drivers/net/can/slcan.c | 4 +-
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/hamradio/mkiss.c | 4 +-
drivers/net/ppp/ppp_async.c | 3 +-
drivers/net/ppp/ppp_synctty.c | 3 +-
drivers/net/slip/slip.c | 4 +-
drivers/s390/char/keyboard.h | 4 +-
drivers/tty/goldfish.c | 12 +-
drivers/tty/mips_ejtag_fdc.c | 22 +-
drivers/tty/moxa.c | 4 +-
drivers/tty/mxser.c | 306 +++----
drivers/tty/n_gsm.c | 11 +-
drivers/tty/n_hdlc.c | 5 +-
drivers/tty/n_tty.c | 692 ++++++++--------
drivers/tty/serial/8250/8250.h | 12 +-
drivers/tty/serial/8250/8250_alpha.c | 21 +
drivers/tty/serial/8250/8250_bcm7271.c | 23 +-
drivers/tty/serial/8250/8250_core.c | 9 +-
drivers/tty/serial/8250/8250_dw.c | 3 +
drivers/tty/serial/8250/8250_pci.c | 407 +--------
drivers/tty/serial/8250/8250_pericom.c | 214 +++++
drivers/tty/serial/8250/8250_port.c | 65 +-
drivers/tty/serial/8250/Kconfig | 8 +
drivers/tty/serial/8250/Makefile | 3 +
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/altera_jtaguart.c | 11 +-
drivers/tty/serial/altera_uart.c | 9 +-
drivers/tty/serial/amba-pl010.c | 3 -
drivers/tty/serial/amba-pl011.c | 73 +-
drivers/tty/serial/ar933x_uart.c | 12 +-
drivers/tty/serial/atmel_serial.c | 16 +-
drivers/tty/serial/bcm63xx_uart.c | 10 +-
drivers/tty/serial/fsl_lpuart.c | 12 +-
drivers/tty/serial/imx.c | 13 +-
drivers/tty/serial/lantiq.c | 34 +-
drivers/tty/serial/liteuart.c | 2 +-
drivers/tty/serial/lpc32xx_hs.c | 2 +-
drivers/tty/serial/meson_uart.c | 45 +-
drivers/tty/serial/pmac_zilog.c | 12 +-
drivers/tty/serial/pxa.c | 12 +-
drivers/tty/serial/samsung_tty.c | 78 +-
drivers/tty/serial/serial_core.c | 19 +-
drivers/tty/serial/sh-sci.c | 91 +-
drivers/tty/serial/stm32-usart.c | 74 +-
drivers/tty/serial/stm32-usart.h | 2 +-
drivers/tty/serial/sunsu.c | 3 +-
drivers/tty/serial/uartlite.c | 2 +-
drivers/tty/serial/vt8500_serial.c | 12 +-
drivers/tty/tty_buffer.c | 279 +++----
drivers/tty/tty_io.c | 921 ++++++++++-----------
drivers/tty/tty_ldisc.c | 292 +++----
drivers/tty/tty_ldsem.c | 2 +-
drivers/tty/tty_port.c | 223 +++--
drivers/tty/vt/keyboard.c | 18 +-
drivers/tty/vt/vt.c | 2 +-
drivers/usb/class/cdc-acm.c | 4 -
include/linux/amba/bus.h | 6 -
include/linux/pci_ids.h | 18 -
include/linux/serial_8250.h | 2 -
include/linux/serial_s3c.h | 9 -
include/linux/tty.h | 153 +++-
include/linux/tty_driver.h | 572 ++++++++-----
include/linux/tty_flip.h | 1 -
include/linux/tty_ldisc.h | 287 ++++---
include/linux/tty_port.h | 131 ++-
net/nfc/nci/uart.c | 5 +-
87 files changed, 3297 insertions(+), 2980 deletions(-)
delete mode 100644 Documentation/driver-api/serial/tty.rst
create mode 100644 Documentation/tty/index.rst
create mode 100644 Documentation/tty/n_tty.rst
create mode 100644 Documentation/tty/tty_buffer.rst
create mode 100644 Documentation/tty/tty_driver.rst
create mode 100644 Documentation/tty/tty_internals.rst
create mode 100644 Documentation/tty/tty_ldisc.rst
create mode 100644 Documentation/tty/tty_port.rst
create mode 100644 Documentation/tty/tty_struct.rst
create mode 100644 drivers/tty/serial/8250/8250_alpha.c
create mode 100644 drivers/tty/serial/8250/8250_pericom.c

\
 
 \ /
  Last update: 2022-01-12 14:57    [W:0.044 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site