lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 5/5] iommu/mediatek: Always tlb_flush_all when each PM resume
From
Date
Il 08/12/21 13:07, Dafna Hirschfeld ha scritto:
> From: Yong Wu <yong.wu@mediatek.com>
>
> Prepare for 2 HWs that sharing pgtable in different power-domains.
>
> When there are 2 M4U HWs, it may has problem in the flush_range in which
> we get the pm_status via the m4u dev, BUT that function don't reflect the
> real power-domain status of the HW since there may be other HW also use
> that power-domain.
>
> DAM allocation is often done while the allocating device is runtime
> suspended. In such a case the iommu will also be suspended and partial
> flushing of the tlb will not be executed.
> Therefore, we add a tlb_flush_all in the pm_runtime_resume to make
> sure the tlb is always clean.
>
> In other case, the iommu's power should be active via device
> link with smi.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> [move the call to mtk_iommu_tlb_flush_all to the bottom of resume cb, improve doc/log]
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

\
 
 \ /
  Last update: 2022-01-10 12:47    [W:0.086 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site