lkml.org 
[lkml]   [2021]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/16] Bring external triggers support to MAX1027-like ADCs
Date
Until now the max1027.c driver, which handles 10-bit devices (max10xx)
and 12-bit devices (max12xx), only supported hardware triggers. When a
hardware trigger is not wired it is very convenient to trigger periodic
conversions with timers or on userspace demand with a sysfs
trigger. Overall, when several values are needed at the same time, using
triggers and buffers improves quite a lot the performances.

This series does a bit of cleaning/code reorganization before actually
bringing more flexibility to the driver, up to the point where it is
possible to use an external trigger (hardware or software) even without
the IRQ line wired.

This series is currently based on a v4.14-rc1 kernel and the external
triggering mechanism has been tested on a custom board where the IRQ and
the EOC lines have not been populated.

How to test sysfs triggers:
echo 0 > /sys/bus/iio/devices/iio_sysfs_trigger/add_trigger
cat /sys/bus/iio/devices/iio_sysfs_trigger/trigger0/name > \
/sys/bus/iio/devices/iio:device0/trigger/current_trigger
echo 1 > /sys/bus/iio/devices/iio:device0/scan_elements/in_voltageX_en
echo 1 > /sys/bus/iio/devices/iio:device0/scan_elements/in_voltageY_en
echo 1 > /sys/bus/iio/devices/iio:device0/buffer/enable
cat /dev/iio\:device0 > /tmp/data &
echo 1 > /sys/bus/iio/devices/trigger0/trigger_now
od -t x1 /tmp/data

Cheers,
Miquèl

Changes in v2:
[All]
* Overall quite a few changes, I'll try to list them here but I made
significant changes on the last few commits so it's hard to have an
exhaustive and detailed list.
* Simplified the return statements as advised by Nuno.
* Dropped useless debug messages.
* Used iio_trigger_validate_own_device() instead of an internal
variable when possible.
* Added Nuno's Reviewed-by's when relevant.
[Created a new patch to fix the style]
[Created a new patch to ensure st->buffer is DMA-safe]
[Push only the requested samples]
* Dropped a useless check over active_scan_mask mask in
->set_trigger_state().
* Dropped the st->buffer indirection with a missing __be16 type.
* Do not push only the requested samples in the IIO buffers, rely on the
core to handle this by providing additional 'available_scan_masks'
instead of dropping this entry from the initial setup.
[Create a helper to configure the trigger]
* Avoided messing with new lines.
* Dropped cnvst_trigger, used a function parameter instead.
[Prevent single channel accesses during buffer reads]
* Used iio_device_claim_direct_mode() when relevant.
* Dropped the extra iio_buffer_enabled() call.
* Prevented returning with a mutex held.
[Introduce an end of conversion helper]
* Moved the check against active scan mask to the very end of the series
where we actually make use of it.
* Moved the Queue declaration to another patch.
[Dropped the patch: Prepare re-using the EOC interrupt]
[Consolidate the end of conversion helper]
* Used a dynamic completion object instead of a static queue.
* Reworded the commit message to actually describe what this commit
does.
[Support software triggers]
* Dropped the patch and replaced it with something hopefully close to
what Jonathan and Nuno described in their reviews.
[Enable software triggers to be used without IRQ]
* Wrote a more generic commit message, not focusing on software
triggers.


Miquel Raynal (16):
iio: adc: max1027: Fix style
iio: adc: max1027: Drop extra warning message
iio: adc: max1027: Drop useless debug messages
iio: adc: max1027: Avoid device managed allocators for DMA purposes
iio: adc: max1027: Minimize the number of converted channels
iio: adc: max1027: Rename a helper
iio: adc: max1027: Create a helper to enable/disable the cnvst trigger
iio: adc: max1027: Simplify the _set_trigger_state() helper
iio: adc: max1027: Ensure a default cnvst trigger configuration
iio: adc: max1027: Create a helper to configure the channels to scan
iio: adc: max1027: Prevent single channel accesses during buffer reads
iio: adc: max1027: Separate the IRQ handler from the read logic
iio: adc: max1027: Introduce an end of conversion helper
iio: adc: max1027: Don't just sleep when the EOC interrupt is
available
iio: adc: max1027: Add support for external triggers
iio: adc: max1027: Don't reject external triggers when there is no IRQ

drivers/iio/adc/max1027.c | 300 ++++++++++++++++++++++++++++----------
1 file changed, 219 insertions(+), 81 deletions(-)

--
2.27.0

\
 
 \ /
  Last update: 2021-09-02 23:15    [W:0.313 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site