Messages in this thread | | | From | Daniel Lezcano <> | Subject | [GIT PULL] thermal for v5.15-rc1 | Date | Sat, 11 Sep 2021 13:32:43 +0200 |
| |
Hi Linus,
The following changes since commit e73f0f0ee7541171d89f2e2491130c7771ba58d3:
Linux 5.14-rc1 (2021-07-11 15:07:40 -0700)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v5.15-rc1
for you to fetch changes up to 70ee251ded6ba24c15537f4abb8a318e233d0d1a:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used (2021-09-09 16:33:29 +0200)
---------------------------------------------------------------- - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke)
---------------------------------------------------------------- Arnd Bergmann (1): thermal/core: Fix thermal_cooling_device_register() prototype
Dan Carpenter (1): thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
Daniel Lezcano (1): MAINTAINERS: Add missing userspace thermal tools to the thermal section
Dmitry Osipenko (3): thermal/drivers/tegra: Add driver for Tegra30 thermal sensor thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra-soctherm: Silence message about clamped temperature
Geert Uytterhoeven (1): thermal: Spelling s/scallbacks/callbacks/
Matthias Kaehlcke (1): thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
Maxime Ripard (1): dt-bindings: thermal: Make trips node optional
Niklas Söderlund (2): thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
Rolf Eike Beer (2): thermal/tools/tmon: Improve the Makefile tools/thermal/tmon: Add cross compiling support
Sebastian Andrzej Siewior (1): thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
Srinivas Pandruvada (1): thermal/drivers/intel: Allow processing of HWP interrupt
Sumeet Pawnikar (2): drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/int340x: Use IMOK independently
Thara Gopinath (3): firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/qcom: Add support for LMh driver dt-bindings: thermal: Add dt binding for QCOM LMh
.../devicetree/bindings/thermal/qcom-lmh.yaml | 82 +++ .../devicetree/bindings/thermal/thermal-zones.yaml | 2 +- MAINTAINERS | 1 + drivers/firmware/qcom_scm.c | 58 ++ drivers/firmware/qcom_scm.h | 4 + .../intel/int340x_thermal/int3400_thermal.c | 14 +- drivers/thermal/intel/intel_powerclamp.c | 4 +- drivers/thermal/intel/intel_tcc_cooling.c | 2 + drivers/thermal/intel/therm_throt.c | 7 +- drivers/thermal/intel/thermal_interrupt.h | 3 + drivers/thermal/qcom/Kconfig | 10 + drivers/thermal/qcom/Makefile | 1 + drivers/thermal/qcom/lmh.c | 232 +++++++ drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 6 + drivers/thermal/rcar_gen3_thermal.c | 110 +++- drivers/thermal/samsung/exynos_tmu.c | 1 + drivers/thermal/tegra/Kconfig | 9 +- drivers/thermal/tegra/Makefile | 1 + drivers/thermal/tegra/soctherm.c | 4 +- drivers/thermal/tegra/tegra30-tsensor.c | 673 +++++++++++++++++++++ include/linux/qcom_scm.h | 14 + include/linux/thermal.h | 7 +- tools/thermal/tmon/Makefile | 10 +- 23 files changed, 1230 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml create mode 100644 drivers/thermal/qcom/lmh.c create mode 100644 drivers/thermal/tegra/tegra30-tsensor.c
-- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
| |