lkml.org 
[lkml]   [2021]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] PCI: Add support for J7200 and AM64
Date
This series adds the compatible specific to J7200 and AM64 and
applies the erratas and configuration specific to them.

This series also includes Nadeem's patch that adds a quirk in
Cadence driver which is used by J7200 [1].

The DT binding for both J7200 and AM64 is already merged.

v1 of the patch series can be found at [2]

Changes from v1:
1) As suggested by Bjorn, used unsigned int :1, instead of bool for
structure members
2) Removed using unnecessary local variables and also fixed some
code alignment

[1] -> https://lore.kernel.org/r/20210528155626.21793-1-nadeem@cadence.com
[2] -> https://lore.kernel.org/r/20210706105035.9915-1-kishon@ti.com

Kishon Vijay Abraham I (5):
PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
PCI: j721e: Add PCIe support for J7200
PCI: j721e: Add PCIe support for AM64
misc: pci_endpoint_test: Do not request or allocate IRQs in probe
misc: pci_endpoint_test: Add deviceID for AM64 and J7200

Nadeem Athani (1):
PCI: cadence: Add quirk flag to set minimum delay in LTSSM
Detect.Quiet state

drivers/misc/pci_endpoint_test.c | 27 ++++++--
drivers/pci/controller/cadence/pci-j721e.c | 61 +++++++++++++++++--
.../pci/controller/cadence/pcie-cadence-ep.c | 4 ++
.../controller/cadence/pcie-cadence-host.c | 3 +
drivers/pci/controller/cadence/pcie-cadence.c | 17 ++++++
drivers/pci/controller/cadence/pcie-cadence.h | 17 +++++-
6 files changed, 117 insertions(+), 12 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2021-08-03 09:51    [W:0.058 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site