lkml.org 
[lkml]   [2021]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] dt-bindings: net: rename Qualcomm IPQ MDIO bindings
From
Date

On 8/2/2021 9:39 PM, Andrew Lunn wrote:
>>> since the phylib code can't satisfy resetting PHY in IPQ chipset, phylib
>>> resets phy by
>>> configuring GPIO output value to 1, then to 0. however the PHY reset in
>>> IPQ chipset need
>>> to configuring GPIO output value to 0, then to 1 for the PHY reset, so i
>>> put the phy-reset-gpios here.
> Look at the active low DT property of a GPIO.
>
> Andrew

> thanks Andrew, will update it in the next patch set.

\
 
 \ /
  Last update: 2021-08-04 04:38    [W:0.058 / U:1.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site