lkml.org 
[lkml]   [2021]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dt-bindings: net: rename Qualcomm IPQ MDIO bindings
> > since the phylib code can't satisfy resetting PHY in IPQ chipset, phylib
> > resets phy by
> > configuring GPIO output value to 1, then to 0. however the PHY reset in
> > IPQ chipset need
> > to configuring GPIO output value to 0, then to 1 for the PHY reset, so i
> > put the phy-reset-gpios here.

Look at the active low DT property of a GPIO.

Andrew

\
 
 \ /
  Last update: 2021-08-02 15:40    [W:0.057 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site