lkml.org 
[lkml]   [2021]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC net-next 1/7] ptp: Add interface for acquiring DPLL state
Date


> -----Original Message-----
> From: Richard Cochran <richardcochran@gmail.com>
> Sent: Sunday, August 22, 2021 4:31 AM
> Subject: Re: [RFC net-next 1/7] ptp: Add interface for acquiring DPLL state
>
> On Fri, Aug 20, 2021 at 06:30:02PM +0000, Machnikowski, Maciej wrote:
>
> > Since the 40.5.2 is not applicable to higher-speed ethernet which
> > don't use auto-negotiation, but rather the link training sequence
> > where the RX side always syncs its clock to the TX side.
>
> By "the RX side always syncs its clock to the TX side" do you mean the RX
> channel synchronizes to the link partner's TX channel?
>
> Wow, that brings back the 100 megabit scheme I guess. That's cool, because
> the same basic idea applies to the PHYTER then.
>

Yes! Sounds very similar! :)

> Still we are doing to need a way for user space to query the HW topology to
> discover whether a given ports may be syntonized from a second port. I
> don't think your pin selection thing works unless user space can tell what the
> pins are connected to.
>
> Thanks,
> Richard

And a good catch! I'll update the RFC to add the query functionality and move the SyncE logic/pins to the netdev subsystem.

Thanks

\
 
 \ /
  Last update: 2021-08-23 10:30    [W:0.100 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site