lkml.org 
[lkml]   [2021]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 37/63] string.h: Introduce memset_after() for wiping trailing members/padding
Date
A common idiom in kernel code is to wipe the contents of a structure
after a given member. This is especially useful in places where there is
trailing padding. These open-coded cases are usually difficult to read
and very sensitive to struct layout changes. Introduce a new helper,
memset_after() that takes the target struct instance, the byte to write,
and the member name after which the zeroing should start.

Additionally adds memset_startat() for wiping trailing members _starting_
at a specific member instead of after a member, which is more readable
in certain circumstances, but doesn't include any preceding padding.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
---
include/linux/string.h | 29 +++++++++++++++++++++++++++++
lib/test_memcpy.c | 24 ++++++++++++++++++++++++
2 files changed, 53 insertions(+)

diff --git a/include/linux/string.h b/include/linux/string.h
index cbe889e404e2..fe56a1774207 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -272,6 +272,35 @@ static __always_inline void memcpy_and_pad(void *dest, size_t dest_len,
memcpy(dest, src, dest_len);
}

+/**
+ * memset_after - Set a value after a struct member to the end of a struct
+ *
+ * @obj: Address of target struct instance
+ * @v: Byte value to repeatedly write
+ * @member: after which struct member to start writing bytes
+ *
+ * This is good for clearing padding following the given member.
+ */
+#define memset_after(obj, v, member) do { \
+ memset((u8 *)(obj) + offsetofend(typeof(*(obj)), member), v, \
+ sizeof(*(obj)) - offsetofend(typeof(*(obj)), member)); \
+} while (0)
+
+/**
+ * memset_startat - Set a value starting at a member to the end of a struct
+ *
+ * @obj: Address of target struct instance
+ * @v: Byte value to repeatedly write
+ * @member: struct member to start writing at
+ *
+ * Note that if there is padding between the prior member and the target
+ * member, memset_after() should be used to clear the prior padding.
+ */
+#define memset_startat(obj, v, member) do { \
+ memset((u8 *)(obj) + offsetof(typeof(*(obj)), member), v, \
+ sizeof(*(obj)) - offsetof(typeof(*(obj)), member)); \
+} while (0)
+
/**
* str_has_prefix - Test if a string has a given prefix
* @str: The string to test
diff --git a/lib/test_memcpy.c b/lib/test_memcpy.c
index be192b8e82b7..50bc99552a17 100644
--- a/lib/test_memcpy.c
+++ b/lib/test_memcpy.c
@@ -215,6 +215,20 @@ static void memset_test(struct kunit *test)
0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
},
};
+ struct some_bytes after = {
+ .data = { 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ },
+ };
+ struct some_bytes startat = {
+ .data = { 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
+ 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+ 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+ 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+ },
+ };
struct some_bytes dest = { };
int count, value;
u8 *ptr;
@@ -245,6 +259,16 @@ static void memset_test(struct kunit *test)
ptr += 8;
memset(ptr++, value++, count++);
compare("argument side-effects", dest, three);
+
+ /* Verify memset_after() */
+ dest = control;
+ memset_after(&dest, 0x72, three);
+ compare("memset_after()", dest, after);
+
+ /* Verify memset_startat() */
+ dest = control;
+ memset_startat(&dest, 0x79, four);
+ compare("memset_startat()", dest, startat);
#undef TEST_OP
}

--
2.30.2
\
 
 \ /
  Last update: 2021-08-18 08:13    [W:0.448 / U:1.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site