lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe:Re: [PATCH] [v2,1/1] Fix WWAN device disabled issue after S3 deep

















At 2021-08-12 16:03:50, "Hans de Goede" <hdegoede@redhat.com> wrote:
>Hi,
>
>On 8/11/21 11:34 AM, Slark Xiao wrote:
>> When WWAN device wake from S3 deep, under thinkpad platform,
>> WWAN would be disabled. This disable status could be checked
>> by command 'nmcli r wwan' or 'rfkill list'.
>> Issue analysis as below:
>> When host resume from S3 deep, thinkpad_acpi driver would
>> call hotkey_resume() function. Finnaly, it will use
>> wan_get_status to check the current status of WWAN device.
>> During this resume progress, wan_get_status would always
>> return off even WWAN boot up completely.
>> If wan_get_status() return off, rfkill_set_sw_state() would set WWAN's
>> status as disabled.
>> This may be a fault of LENOVO BIOS.
>> Workaround is add a WWAN device check before rfkill_set_sw_state().
>> If it's a Foxconn WWAN device, then we will ignore to do a status update.
>>
>> Signed-off-by: Slark Xiao <slark_xiao@163.com>
>
>Thank you for debugging this and thank you for the patch.
>
>I'm not in favor of using a pci-device-id list here. Maybe we should
>simply just never update the sw-rfkill state after a suspend-resume ?
>
>I mean the sw_state should be unchanged after a suspend/resume.
>
>Only the hw_state on older devices which still have a physical
>radio on/off slider on the side might have changed during suspend.
>
>So I think it might be better to just drop the tpacpi_rfk_update_swstate
>call all together from the resume path?
>
>Mark do you have any input here?
>
>Regards,
>
>Hans
>
Hi Hans,
Thanks you for your recognition.
I think your solution would be better. My solution only fix the WWAN device behavior from Foxconn.
And Mark, you can contact with gicay@lenovo.com for the details.

Thanks
Slark Xiao
>
>
>> ---
>> drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
>> 1 file changed, 14 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
>> index 603156a6e3ed..e3b7bc0e7a33 100644
>> --- a/drivers/platform/x86/thinkpad_acpi.c
>> +++ b/drivers/platform/x86/thinkpad_acpi.c
>> @@ -1159,6 +1159,13 @@ struct tpacpi_rfk_ops {
>>
>> static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX];
>>
>> +/*Foxconn SDX55 T77W175 products. All available device ID*/
>> +static const struct pci_device_id foxconn_device_ids[] = {
>> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AB) },
>> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AF) },
>> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0B4) },
>> + {}
>> +};
>> /* Query FW and update rfkill sw state for a given rfkill switch */
>> static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
>> {
>> @@ -1182,8 +1189,13 @@ static void tpacpi_rfk_update_swstate_all(void)
>> {
>> unsigned int i;
>>
>> - for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
>> - tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
>> + for (i = 0; i < TPACPI_RFK_SW_MAX; i++) {
>> + if (pci_dev_present(foxconn_device_ids) && i == 1)
>> + pr_info("Find Foxconn wwan device, ignore to update rfkill switch status\n");
>> + else
>> + tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
>> +
>> + }
>> }
>>
>> /*
>>
\
 
 \ /
  Last update: 2021-08-12 13:37    [W:0.036 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site