lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/3] PM / Domains: Add support for 'required-opps' to set default perf state
Date
Some devices within power domains with performance states do not
support DVFS, but still need to vote on a default/static state
while they are active. They can express this using the 'required-opps'
property in device tree, which points to the phandle of the OPP
supported by the corresponding power-domains.

Add support to parse this information from DT and then set the
specified performance state during attach and drop it on detach.
runtime suspend/resume callbacks already have logic to drop/set
the vote as needed and should take care of dropping the default
perf state vote on runtime suspend and restore it back on runtime
resume.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/base/power/domain.c | 30 ++++++++++++++++++++++++++++--
include/linux/pm_domain.h | 1 +
2 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index a934c67..e1c8994 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)

dev_dbg(dev, "removing from PM domain %s\n", pd->name);

+ /* Drop the default performance state */
+ if (dev_gpd_data(dev)->default_pstate) {
+ dev_pm_genpd_set_performance_state(dev, 0);
+ dev_gpd_data(dev)->default_pstate = 0;
+ }
+
for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
ret = genpd_remove_device(pd, dev);
if (ret != -EAGAIN)
@@ -2637,6 +2643,7 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
{
struct of_phandle_args pd_args;
struct generic_pm_domain *pd;
+ int pstate;
int ret;

ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
@@ -2675,10 +2682,29 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
genpd_unlock(pd);
}

- if (ret)
+ if (ret) {
genpd_remove_device(pd, dev);
+ return -EPROBE_DEFER;
+ }

- return ret ? -EPROBE_DEFER : 1;
+ /* Set the default performance state */
+ pstate = of_get_required_opp_performance_state(dev->of_node, index);
+ if (pstate < 0 && pstate != -ENODEV) {
+ ret = pstate;
+ goto err;
+ } else if (pstate > 0) {
+ ret = dev_pm_genpd_set_performance_state(dev, pstate);
+ if (ret)
+ goto err;
+ dev_gpd_data(dev)->default_pstate = pstate;
+ }
+ return 1;
+
+err:
+ dev_err(dev, "failed to set required performance state for power-domain %s: %d\n",
+ pd->name, ret);
+ genpd_remove_device(pd, dev);
+ return ret;
}

/**
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 21a0577..67017c9 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -198,6 +198,7 @@ struct generic_pm_domain_data {
struct notifier_block *power_nb;
int cpu;
unsigned int performance_state;
+ unsigned int default_pstate;
unsigned int rpm_pstate;
ktime_t next_wakeup;
void *data;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2021-08-12 13:29    [W:0.067 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site