lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 2/3] PM / Domains: Add support for 'required-opps' to set default perf state
On Thu, 12 Aug 2021 at 13:28, Rajendra Nayak <rnayak@codeaurora.org> wrote:
>
> Some devices within power domains with performance states do not
> support DVFS, but still need to vote on a default/static state
> while they are active. They can express this using the 'required-opps'
> property in device tree, which points to the phandle of the OPP
> supported by the corresponding power-domains.
>
> Add support to parse this information from DT and then set the
> specified performance state during attach and drop it on detach.
> runtime suspend/resume callbacks already have logic to drop/set
> the vote as needed and should take care of dropping the default
> perf state vote on runtime suspend and restore it back on runtime
> resume.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe


> ---
> drivers/base/power/domain.c | 30 ++++++++++++++++++++++++++++--
> include/linux/pm_domain.h | 1 +
> 2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index a934c67..e1c8994 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -2598,6 +2598,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)
>
> dev_dbg(dev, "removing from PM domain %s\n", pd->name);
>
> + /* Drop the default performance state */
> + if (dev_gpd_data(dev)->default_pstate) {
> + dev_pm_genpd_set_performance_state(dev, 0);
> + dev_gpd_data(dev)->default_pstate = 0;
> + }
> +
> for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
> ret = genpd_remove_device(pd, dev);
> if (ret != -EAGAIN)
> @@ -2637,6 +2643,7 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
> {
> struct of_phandle_args pd_args;
> struct generic_pm_domain *pd;
> + int pstate;
> int ret;
>
> ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
> @@ -2675,10 +2682,29 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
> genpd_unlock(pd);
> }
>
> - if (ret)
> + if (ret) {
> genpd_remove_device(pd, dev);
> + return -EPROBE_DEFER;
> + }
>
> - return ret ? -EPROBE_DEFER : 1;
> + /* Set the default performance state */
> + pstate = of_get_required_opp_performance_state(dev->of_node, index);
> + if (pstate < 0 && pstate != -ENODEV) {
> + ret = pstate;
> + goto err;
> + } else if (pstate > 0) {
> + ret = dev_pm_genpd_set_performance_state(dev, pstate);
> + if (ret)
> + goto err;
> + dev_gpd_data(dev)->default_pstate = pstate;
> + }
> + return 1;
> +
> +err:
> + dev_err(dev, "failed to set required performance state for power-domain %s: %d\n",
> + pd->name, ret);
> + genpd_remove_device(pd, dev);
> + return ret;
> }
>
> /**
> diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
> index 21a0577..67017c9 100644
> --- a/include/linux/pm_domain.h
> +++ b/include/linux/pm_domain.h
> @@ -198,6 +198,7 @@ struct generic_pm_domain_data {
> struct notifier_block *power_nb;
> int cpu;
> unsigned int performance_state;
> + unsigned int default_pstate;
> unsigned int rpm_pstate;
> ktime_t next_wakeup;
> void *data;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

\
 
 \ /
  Last update: 2021-08-12 13:47    [W:0.072 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site