lkml.org 
[lkml]   [2021]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
From
Date
Hello!

On 12.08.2021 4:08, Slark Xiao wrote:

> HI Sergei,
>   Yes. Our produt has 3 mode: PCIe mode only, USB mode only, and PCIE+USB.
>   When we need to reproduce some crash issue, we will let it enter into
> PCIE+USB mode.
>   In this scenario, USB would have a diag port to capture memory dump.

That's all fine, I was just pointing out the typo. :-)
Couldn't open your another reply...

> At 2021-08-11 18:58:09, "Sergei Shtylyov" <sergei.shtylyov@gmail.com> wrote:
>>Hello!
>>
>>On 11.08.2021 11:56, Slark Xiao wrote:
>>
>>> Foxconn SDX55 T77W175 device is working in PCIe mode normally.
>>> You can find it in drivers/bus/mhi/pci_geneirc.c file.
>>
>> pci_generic? :-)
>>
>>> But in some scenario, we need to capture the memory dump once it crashed.
>>> So a diag port driver is needed.
>>>
>>> Signed-off-by: Slark Xiao <slark_xiao@163.com>

[...]

MBR, Sergei

\
 
 \ /
  Last update: 2021-08-12 12:02    [W:4.546 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site