lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] atl1c: fix Mikrotik 10/25G NIC detection
Date
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable,
on rare occasions it can happen that some physical functions of
the NIC do not get initialized due to timeouted early MDIO op.

This changes the atl1c probe on Mikrotik 10/25G NIC not to
depend on MDIO op emulation.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 7dff20350865..f19370c33444 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -594,6 +594,11 @@ int atl1c_phy_init(struct atl1c_hw *hw)
int ret_val;
u16 mii_bmcr_data = BMCR_RESET;

+ if (hw->nic_type == athr_mt) {
+ hw->phy_configured = true;
+ return 0;
+ }
+
if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) ||
(atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) {
dev_err(&pdev->dev, "Error get phy ID\n");
--
2.31.1
\
 
 \ /
  Last update: 2021-07-08 11:50    [W:0.039 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site