lkml.org 
[lkml]   [2021]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] ARM: dts: Add basic support for EcoNet EN7523
On Fri, Jul 30, 2021 at 03:45:50PM +0200, Bert Vermeulen wrote:
> From: John Crispin <john@phrozen.org>
>
> Add basic support for EcoNet EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/en7523-evb.dts | 17 ++++
> arch/arm/boot/dts/en7523.dtsi | 128 +++++++++++++++++++++++++++++++
> 3 files changed, 147 insertions(+)
> create mode 100644 arch/arm/boot/dts/en7523-evb.dts
> create mode 100644 arch/arm/boot/dts/en7523.dtsi
>

> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;

> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + enable-method = "psci";
> + clock-frequency = <80000000>;
> + next-level-cache = <&L2_0>;
> +
> + };

> + gic: interrupt-controller@09000000 {
> + compatible = "arm,gic-v3";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x09000000 0x20000>,
> + <0x09080000 0x80000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +
> + its: gic-its@09020000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + #msi-cell = <1>;

Missing 's' here for '#msi-cells'.

> + reg = <0x090200000 0x20000>;
> + };
> + };

Looking at this again, I was under the impression that Cortex-A7 only
supported GICv2; is this actually a Cortex-A7 or a different CPU?

Which revision is this?

Thanks,
Mark.

\
 
 \ /
  Last update: 2021-07-30 17:02    [W:0.175 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site