Messages in this thread | | | Subject | Re: [PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node | From | Thara Gopinath <> | Date | Thu, 29 Jul 2021 06:50:52 -0400 |
| |
Hi Konrad,
On 7/28/21 6:25 PM, Konrad Dybcio wrote: > This will enable temperature reporting for various SoC > components. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + > arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++++++++++ > 2 files changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > index 4a2eaf28e3fd..d3b9e9b600a2 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -48,6 +48,7 @@ properties: > - qcom,sc7180-tsens > - qcom,sc7280-tsens > - qcom,sc8180x-tsens > + - qcom,sdm630-tsens > - qcom,sdm845-tsens > - qcom,sm8150-tsens > - qcom,sm8250-tsens > diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi > index 1e54828817d5..7e9c80e35fba 100644 > --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi > @@ -627,6 +627,17 @@ mnoc: interconnect@1745000 { > <&mmcc AHB_CLK_SRC>; > }; > > + tsens: thermal-sensor@10ae000 { > + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2"; > + reg = <0x010ae000 0x1000>, /* TM */ > + <0x010ad000 0x1000>; /* SROT */ > + #qcom,sensors = <12>;
Are all 12 sensors used ? I see that in a later patch "arm64: dts: qcom: sdm630: Add thermal-zones configuration" only 9 are used.
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > + #thermal-sensor-cells = <1>; > + }; > + > tcsr_mutex_regs: syscon@1f40000 { > compatible = "syscon"; > reg = <0x01f40000 0x20000>; >
-- Warm Regards Thara (She/Her/Hers)
| |