lkml.org 
[lkml]   [2021]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] TDA1997x: report -ENOLINK after disconnecting HDMI source
Date
The TD1997x chip retains vper, hper and hsper register values when the
HDMI source is disconnected. Use a different means of checking if the
link is still valid.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>

diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
index 0b516a45a135..36a7b89afb08 100644
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -1107,7 +1107,8 @@ tda1997x_detect_std(struct tda1997x_state *state,
hper = io_read16(sd, REG_H_PER) & MASK_HPER;
hsper = io_read16(sd, REG_HS_WIDTH) & MASK_HSWIDTH;
v4l2_dbg(1, debug, sd, "Signal Timings: %u/%u/%u\n", vper, hper, hsper);
- if (!vper || !hper || !hsper)
+
+ if (!state->input_detect[0] && !state->input_detect[1])
return -ENOLINK;

for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
\
 
 \ /
  Last update: 2021-07-26 12:51    [W:0.096 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site