lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC
Date
Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:

/dev/mmcblk2:
Timing cached reads: 1638 MB in 2.00 seconds = 818.44 MB/sec
Timing buffered disk reads: 376 MB in 3.01 seconds = 124.74 MB/sec

First patch only sets proper power supplies to GPIO banks and second
adds eMMC support.

Please take a look.

Best regards,
Jernej Skrabec

Jernej Skrabec (2):
arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
arm64: dts: allwinner: h6: tanix-tx6: enable emmc

.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)

--
2.32.0

\
 
 \ /
  Last update: 2021-07-21 22:11    [W:0.047 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site