lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
[+cc linux-pci]

On Fri, Jul 16, 2021 at 07:28:43PM +0530, Prasad Malisetty wrote:
> Changes in v4 as suggested by Bjorn:
>
> * Changed pipe clk mux name as gcc_pcie_1_pipe_clk_src.
> * Changed pipe_ext_src as phy_pipe_clk.
> * Updated commit message for [PATCH v4 4/4].
>
>
> Changes in v3:
> * Changed pipe clock names in dt bindings as pipe_mux and phy_pipe.
> * Moved reset and NVMe GPIO pin configs into board specific file.
> * Updated pipe clk mux commit message.
>
> Changes in v2:
> * Moved pcie pin control settings into IDP file.
> * Replaced pipe_clk_src with pipe_clk_mux in pcie driver
> * Included pipe clk mux setting change set in this series
>
> Prasad Malisetty (4):
> dt-bindings: pci: qcom: Document PCIe bindings for SC720
> arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
> arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
> PCIe: qcom: Add support to control pipe clk src
>
> .../devicetree/bindings/pci/qcom,pcie.txt | 17 +++
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 38 +++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 125 +++++++++++++++++++++
> drivers/pci/controller/dwc/pcie-qcom.c | 22 ++++

$ ./scripts/get_maintainer.pl -f drivers/pci/controller/dwc/pcie-qcom.c

tells you that linux-pci should be included. One reason that's
important is because patchwork watches linux-pci for incoming patches,
and I use patchwork as my to-do list.

\
 
 \ /
  Last update: 2021-07-16 16:31    [W:0.142 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site