lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v14 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
On Wed, Jul 14, 2021 at 09:40:13AM +0300, Felipe Balbi wrote:
>
> Hi,
>
> Thinh Nguyen <Thinh.Nguyen@synopsys.com> writes:
> >> Thinh Nguyen <Thinh.Nguyen@synopsys.com> writes:
> >>> Wesley Cheng wrote:
> >>>> Some devices have USB compositions which may require multiple endpoints
> >>>> that support EP bursting. HW defined TX FIFO sizes may not always be
> >>>> sufficient for these compositions. By utilizing flexible TX FIFO
> >>>> allocation, this allows for endpoints to request the required FIFO depth to
> >>>> achieve higher bandwidth. With some higher bMaxBurst configurations, using
> >>>> a larger TX FIFO size results in better TX throughput.
> >>>>
> >>>> By introducing the check_config() callback, the resizing logic can fetch
> >>>> the maximum number of endpoints used in the USB composition (can contain
> >>>> multiple configurations), which helps ensure that the resizing logic can
> >>>> fulfill the configuration(s), or return an error to the gadget layer
> >>>> otherwise during bind time.
> >>>>
> >>>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> >>>> ---
> >>>> drivers/usb/dwc3/core.c | 15 +++
> >>>> drivers/usb/dwc3/core.h | 16 ++++
> >>>> drivers/usb/dwc3/ep0.c | 2 +
> >>>> drivers/usb/dwc3/gadget.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++
> >>>> 4 files changed, 265 insertions(+)
> >>>>
> >>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> >>>> index ba74ad7..b194aecd 100644
> >>>> --- a/drivers/usb/dwc3/core.c
> >>>> +++ b/drivers/usb/dwc3/core.c
> >>>> @@ -1267,6 +1267,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>>> u8 rx_max_burst_prd;
> >>>> u8 tx_thr_num_pkt_prd;
> >>>> u8 tx_max_burst_prd;
> >>>> + u8 tx_fifo_resize_max_num;
> >>>> const char *usb_psy_name;
> >>>> int ret;
> >>>>
> >>>> @@ -1282,6 +1283,13 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>>> */
> >>>> hird_threshold = 12;
> >>>>
> >>>> + /*
> >>>> + * default to a TXFIFO size large enough to fit 6 max packets. This
> >>>> + * allows for systems with larger bus latencies to have some headroom
> >>>> + * for endpoints that have a large bMaxBurst value.
> >>>> + */
> >>>> + tx_fifo_resize_max_num = 6;
> >>>> +
> >>>> dwc->maximum_speed = usb_get_maximum_speed(dev);
> >>>> dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
> >>>> dwc->dr_mode = usb_get_dr_mode(dev);
> >>>> @@ -1325,6 +1333,11 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>>> &tx_thr_num_pkt_prd);
> >>>> device_property_read_u8(dev, "snps,tx-max-burst-prd",
> >>>> &tx_max_burst_prd);
> >>>> + dwc->do_fifo_resize = device_property_read_bool(dev,
> >>>> + "tx-fifo-resize");
> >>>> + if (dwc->do_fifo_resize)
> >>>> + device_property_read_u8(dev, "tx-fifo-max-num",
> >>>> + &tx_fifo_resize_max_num);
> >>>
> >>> Why is this check here? The dwc->tx_fifo_resize_max_num should store
> >>> whatever property the user sets. Whether the driver wants to use this
> >>
> >> Ack!
> >>
> >>> property should depend on "dwc->do_fifo_resize". Also why don't we have
> >>> "snps," prefix to be consistent with the other properties?
> >>
> >> Ack!
> >>
> >>> Can we enforce to a single property? If the designer wants to enable
> >>> this feature, he/she can to provide the tx-fifo-max-num. This would
> >>> simplify the driver a bit. Since this is to optimize for performance,
> >>> the user should know/want/test the specific value if they want to set
> >>> for their setup and not hoping that the default setting not break their
> >>> setup. So we can remove the "do_fifo_resize" property and just check
> >>> whether tx_fifo_resize_max_num is set.
> >>
> >> Ack!
> >>
> >> All very valid points :-)
> >>
> >
> > Looks like this series already landed in Greg's testing branch. Not sure
> > how we usually handle this to address some of our concerns. Add fix
> > patches on top of Greg's testing branch?
>
> yup, no choice anymore :-(

I took these as they seemed correct. If they need to be reverted,
that's fine I can do that. But it looks like Wesley can just make some
simple changes on top of them to resolve the remaining issues, right?

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-07-14 08:53    [W:0.094 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site