lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v14 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
On Wed, Jul 14, 2021 at 03:10:25AM +0000, Thinh Nguyen wrote:
> Felipe Balbi wrote:
> >
> > Hi,
> >
> > Thinh Nguyen <Thinh.Nguyen@synopsys.com> writes:
> >> Wesley Cheng wrote:
> >>> Some devices have USB compositions which may require multiple endpoints
> >>> that support EP bursting. HW defined TX FIFO sizes may not always be
> >>> sufficient for these compositions. By utilizing flexible TX FIFO
> >>> allocation, this allows for endpoints to request the required FIFO depth to
> >>> achieve higher bandwidth. With some higher bMaxBurst configurations, using
> >>> a larger TX FIFO size results in better TX throughput.
> >>>
> >>> By introducing the check_config() callback, the resizing logic can fetch
> >>> the maximum number of endpoints used in the USB composition (can contain
> >>> multiple configurations), which helps ensure that the resizing logic can
> >>> fulfill the configuration(s), or return an error to the gadget layer
> >>> otherwise during bind time.
> >>>
> >>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> >>> ---
> >>> drivers/usb/dwc3/core.c | 15 +++
> >>> drivers/usb/dwc3/core.h | 16 ++++
> >>> drivers/usb/dwc3/ep0.c | 2 +
> >>> drivers/usb/dwc3/gadget.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++
> >>> 4 files changed, 265 insertions(+)
> >>>
> >>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> >>> index ba74ad7..b194aecd 100644
> >>> --- a/drivers/usb/dwc3/core.c
> >>> +++ b/drivers/usb/dwc3/core.c
> >>> @@ -1267,6 +1267,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>> u8 rx_max_burst_prd;
> >>> u8 tx_thr_num_pkt_prd;
> >>> u8 tx_max_burst_prd;
> >>> + u8 tx_fifo_resize_max_num;
> >>> const char *usb_psy_name;
> >>> int ret;
> >>>
> >>> @@ -1282,6 +1283,13 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>> */
> >>> hird_threshold = 12;
> >>>
> >>> + /*
> >>> + * default to a TXFIFO size large enough to fit 6 max packets. This
> >>> + * allows for systems with larger bus latencies to have some headroom
> >>> + * for endpoints that have a large bMaxBurst value.
> >>> + */
> >>> + tx_fifo_resize_max_num = 6;
> >>> +
> >>> dwc->maximum_speed = usb_get_maximum_speed(dev);
> >>> dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
> >>> dwc->dr_mode = usb_get_dr_mode(dev);
> >>> @@ -1325,6 +1333,11 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> >>> &tx_thr_num_pkt_prd);
> >>> device_property_read_u8(dev, "snps,tx-max-burst-prd",
> >>> &tx_max_burst_prd);
> >>> + dwc->do_fifo_resize = device_property_read_bool(dev,
> >>> + "tx-fifo-resize");
> >>> + if (dwc->do_fifo_resize)
> >>> + device_property_read_u8(dev, "tx-fifo-max-num",
> >>> + &tx_fifo_resize_max_num);
> >>
> >> Why is this check here? The dwc->tx_fifo_resize_max_num should store
> >> whatever property the user sets. Whether the driver wants to use this
> >
> > Ack!
> >
> >> property should depend on "dwc->do_fifo_resize". Also why don't we have
> >> "snps," prefix to be consistent with the other properties?
> >
> > Ack!
> >
> >> Can we enforce to a single property? If the designer wants to enable
> >> this feature, he/she can to provide the tx-fifo-max-num. This would
> >> simplify the driver a bit. Since this is to optimize for performance,
> >> the user should know/want/test the specific value if they want to set
> >> for their setup and not hoping that the default setting not break their
> >> setup. So we can remove the "do_fifo_resize" property and just check
> >> whether tx_fifo_resize_max_num is set.
> >
> > Ack!
> >
> > All very valid points :-)
> >
>
> Looks like this series already landed in Greg's testing branch. Not sure
> how we usually handle this to address some of our concerns. Add fix
> patches on top of Greg's testing branch?

Yes please send patches on top of this series.

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-07-14 08:52    [W:0.104 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site