lkml.org 
[lkml]   [2021]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] serial: stm32: reset dma buffers during probe
On Thu, May 27, 2021 at 11:49:01AM +0200, Greg Kroah-Hartman wrote:
> On Thu, May 27, 2021 at 11:15:36AM +0200, Erwan Le Ray wrote:
> > Reset Rx and Tx dma buffers during probe to avoid freeing
> > invalid buffer in no dma mode.
> >
> > Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
> >
> > diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
> > index c2ae7b392b86..2ac3b30477a7 100644
> > --- a/drivers/tty/serial/stm32-usart.c
> > +++ b/drivers/tty/serial/stm32-usart.c
> > @@ -1168,6 +1168,8 @@ static struct stm32_port *stm32_usart_of_get_port(struct platform_device *pdev)
> > stm32_ports[id].cr1_irq = USART_CR1_RXNEIE;
> > stm32_ports[id].cr3_irq = 0;
> > stm32_ports[id].last_res = RX_BUF_L;
> > + stm32_ports[id].rx_dma_buf = 0;
> > + stm32_ports[id].tx_dma_buf = 0;
> > return &stm32_ports[id];
> > }
> >
> > --
> > 2.17.1
> >
>
> Is this a bugfix? if so, what commit does this fix and does it need to
> be backported anywhere?

Due to lack of a response, I've dropped this from my queue. Please add
the needed information to the patch when you get the chance to resend
this.

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-06-09 14:40    [W:0.435 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site