lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] serial: stm32: reset dma buffers during probe
From
Date
Hi Greg,

Thanks for your question. This old patch is finally not necessary any more.
You can cancel this series, I will resend the second patch.

Best regards, Erwan.


On 5/27/21 11:49 AM, Greg Kroah-Hartman wrote:
> On Thu, May 27, 2021 at 11:15:36AM +0200, Erwan Le Ray wrote:
>> Reset Rx and Tx dma buffers during probe to avoid freeing
>> invalid buffer in no dma mode.
>>
>> Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
>>
>> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
>> index c2ae7b392b86..2ac3b30477a7 100644
>> --- a/drivers/tty/serial/stm32-usart.c
>> +++ b/drivers/tty/serial/stm32-usart.c
>> @@ -1168,6 +1168,8 @@ static struct stm32_port *stm32_usart_of_get_port(struct platform_device *pdev)
>> stm32_ports[id].cr1_irq = USART_CR1_RXNEIE;
>> stm32_ports[id].cr3_irq = 0;
>> stm32_ports[id].last_res = RX_BUF_L;
>> + stm32_ports[id].rx_dma_buf = 0;
>> + stm32_ports[id].tx_dma_buf = 0;
>> return &stm32_ports[id];
>> }
>>
>> --
>> 2.17.1
>>
>
> Is this a bugfix? if so, what commit does this fix and does it need to
> be backported anywhere?
>
> thanks,
>
> greg k-h
>

\
 
 \ /
  Last update: 2021-06-10 10:55    [W:0.062 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site