Messages in this thread | | | Subject | Re: linux-parisc compile failure in current git | From | Helge Deller <> | Date | Thu, 10 Jun 2021 00:49:47 +0200 |
| |
On 6/1/21 12:21 PM, Meelis Roos wrote: > Upstream Linux git fails to compile on gentoo hppa - .config below. > I have 2 gcc-s as always: > $ gcc-config -l > [1] hppa2.0-unknown-linux-gnu-9.3.0 > [2] hppa2.0-unknown-linux-gnu-10.2.0 * > > [3] hppa64-unknown-linux-gnu-10.2.0 *
I see the same issue too, but only when compiling natively on a parisc machine. Cross-compiling on a x86 box works nicely.
First I thought it's a problem with setting the "cross_compiling" flag in ./Makefile. But that's not sufficient.
On a x86 machine (which builds fine) I get SRCARCH=parisc SUBARCH=x86 UTS_MACHINE=parisc The arch/parisc/kernel/asm-offsets.c file gets preprocessed via: hppa64-linux-gnu-gcc
On a native 32bit parisc machine I have: SRCARCH=parisc SUBARCH=parisc UTS_MACHINE=parisc Here the arch/parisc/kernel/asm-offsets.c file gets preprocessed via: gcc Instead here the native hppa64-linux-gnu-gcc (cross compiler) should have been used too, since we build a 64-bit hppa kernel (CONFIG_64BIT is set). Note, on hppa we don't have an "-m64" compiler flag as on x86.
Mashahiro, do you maybe have an idea what gets wrong here, or which patch has changed the behaviour how the asm-offsets.c file gets preprocessed?
Thanks, Helge
> $ hppa2.0-unknown-linux-gnu-gcc -v > Using built-in specs. > COLLECT_GCC=hppa2.0-unknown-linux-gnu-gcc > COLLECT_LTO_WRAPPER=/usr/libexec/gcc/hppa2.0-unknown-linux-gnu/10.2.0/lto-wrapper > Target: hppa2.0-unknown-linux-gnu > Configured with: /var/tmp/portage/sys-devel/gcc-10.2.0-r5/work/gcc-10.2.0/configure --host=hppa2.0-unknown-linux-gnu --build=hppa2.0-unknown-linux-gnu --prefix=/usr --bindir=/usr/hppa2.0-unknown-linux-gnu/gcc-bin/10.2.0 --includedir=/usr/lib/gcc/hppa2.0-unknown-linux-gnu/10.2.0/include --datadir=/usr/share/gcc-data/hppa2.0-unknown-linux-gnu/10.2.0 --mandir=/usr/share/gcc-data/hppa2.0-unknown-linux-gnu/10.2.0/man --infodir=/usr/share/gcc-data/hppa2.0-unknown-linux-gnu/10.2.0/info --with-gxx-include-dir=/usr/lib/gcc/hppa2.0-unknown-linux-gnu/10.2.0/include/g++-v10 --with-python-dir=/share/gcc-data/hppa2.0-unknown-linux-gnu/10.2.0/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 10.2.0-r5 p6' --disable-esp --enable-libstdcxx-time --enable-shared --enable-threads=posix > --enable-__cxa_atexit --enable-clocale=gnu --disable-multilib --disable-fixed-point --enable-libgomp --disable-libssp --disable-libada --disable-systemtap --disable-vtable-verify --disable-libvtv --without-zstd --enable-lto --without-isl --disable-libsanitizer --enable-default-pie --disable-default-ssp > > hppa64-unknown-linux-gnu-gcc -v > Using built-in specs. > COLLECT_GCC=hppa64-unknown-linux-gnu-gcc > COLLECT_LTO_WRAPPER=/usr/libexec/gcc/hppa64-unknown-linux-gnu/10.2.0/lto-wrapper > Target: hppa64-unknown-linux-gnu > Configured with: /var/tmp/portage/sys-devel/kgcc64-10.2.0/work/gcc-10.2.0/configure --host=hppa2.0-unknown-linux-gnu --target=hppa64-unknown-linux-gnu --build=hppa2.0-unknown-linux-gnu --prefix=/usr --bindir=/usr/hppa2.0-unknown-linux-gnu/hppa64-unknown-linux-gnu/gcc-bin/10.2.0 --includedir=/usr/lib/gcc/hppa64-unknown-linux-gnu/10.2.0/include --datadir=/usr/share/gcc-data/hppa64-unknown-linux-gnu/10.2.0 --mandir=/usr/share/gcc-data/hppa64-unknown-linux-gnu/10.2.0/man --infodir=/usr/share/gcc-data/hppa64-unknown-linux-gnu/10.2.0/info --with-gxx-include-dir=/usr/lib/gcc/hppa64-unknown-linux-gnu/10.2.0/include/g++-v10 --with-python-dir=/share/gcc-data/hppa64-unknown-linux-gnu/10.2.0/python --enable-languages=c --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 10.2.0 p1' --disable-libstdcxx-pch --enable-poison-system-directories --disable-shared > --disable-libquadmath --disable-libatomic --disable-threads --without-headers --disable-bootstrap --enable-__cxa_atexit --enable-clocale=gnu --disable-multilib --disable-libgomp --disable-libssp --enable-lto --without-isl --disable-libsanitizer > Thread model: single > Supported LTO compression algorithms: zlib zstd > gcc version 10.2.0 (Gentoo 10.2.0 p1) > > > > > SYNC include/config/auto.conf.cmd > UPD include/config/kernel.release > UPD include/generated/utsrelease.h > CC arch/parisc/kernel/asm-offsets.s > In file included from ./arch/parisc/include/asm/bitops.h:203, > from ./include/linux/bitops.h:32, > from ./include/linux/kernel.h:12, > from ./arch/parisc/include/asm/bug.h:5, > from ./include/linux/bug.h:5, > from ./include/linux/thread_info.h:12, > from ./include/asm-generic/current.h:5, > from ./arch/parisc/include/generated/asm/current.h:1, > from ./include/linux/sched.h:12, > from arch/parisc/kernel/asm-offsets.c:18: > ./include/asm-generic/bitops/__fls.h: In function ‘__fls’: > ./include/asm-generic/bitops/__fls.h:18:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 18 | if (!(word & (~0ul << 32))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:20:8: warning: left shift count >= width of type [-Wshift-count-overflow] > 20 | word <<= 32; > | ^~~ > ./include/asm-generic/bitops/__fls.h:23:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 23 | if (!(word & (~0ul << (BITS_PER_LONG-16)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:27:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 27 | if (!(word & (~0ul << (BITS_PER_LONG-8)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:31:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 31 | if (!(word & (~0ul << (BITS_PER_LONG-4)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:35:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 35 | if (!(word & (~0ul << (BITS_PER_LONG-2)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:39:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 39 | if (!(word & (~0ul << (BITS_PER_LONG-1)))) > | ^~ > In file included from ./arch/parisc/include/asm/processor.h:17, > from ./arch/parisc/include/asm/thread_info.h:8, > from ./include/linux/thread_info.h:59, > from ./include/asm-generic/current.h:5, > from ./arch/parisc/include/generated/asm/current.h:1, > from ./include/linux/sched.h:12, > from arch/parisc/kernel/asm-offsets.c:18: > ./arch/parisc/include/asm/pdc.h: At top level: > ./arch/parisc/include/asm/pdc.h:75:10: warning: ‘struct pdc_memory_table’ declared inside parameter list will not be visible outside of this definition or declaration > 75 | struct pdc_memory_table *tbl, unsigned long entries); > | ^~~~~~~~~~~~~~~~ > ./arch/parisc/include/asm/pdc.h:74:30: warning: ‘struct pdc_memory_table_raddr’ declared inside parameter list will not be visible outside of this definition or declaration > 74 | int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, > | ^~~~~~~~~~~~~~~~~~~~~~ > In file included from ././include/linux/compiler_types.h:65, > from <command-line>: > ./include/linux/smp.h:34:26: error: requested alignment ‘20’ is not a positive power of 2 > 34 | __aligned(sizeof(struct __call_single_data)); > | ^~~~~~~~~~~~~~~~~~ > ./include/linux/compiler_attributes.h:52:68: note: in definition of macro ‘__aligned’ > 52 | #define __aligned(x) __attribute__((__aligned__(x))) > | ^ > In file included from ./include/linux/mm.h:33, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/parisc/kernel/asm-offsets.c:20: > ./include/linux/pgtable.h: In function ‘pud_index’: > ./include/linux/pgtable.h:59:18: warning: right shift count >= width of type [-Wshift-count-overflow] > 59 | return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); > | ^~ > ./include/linux/pgtable.h: In function ‘pgd_offset_pgd’: > ./include/linux/pgtable.h:66:29: warning: right shift count >= width of type [-Wshift-count-overflow] > 66 | #define pgd_index(a) (((a) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) > | ^~ > ./include/linux/pgtable.h:106:16: note: in expansion of macro ‘pgd_index’ > 106 | return (pgd + pgd_index(address)); > | ^~~~~~~~~ > In file included from ./include/linux/stringhash.h:7, > from ./include/linux/dcache.h:15, > from ./include/linux/fs.h:8, > from ./include/linux/huge_mm.h:8, > from ./include/linux/mm.h:726, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/parisc/kernel/asm-offsets.c:20: > ./include/linux/hash.h: In function ‘hash32_ptr’: > ./include/linux/hash.h:99:14: warning: right shift count >= width of type [-Wshift-count-overflow] > 99 | val ^= (val >> 32); > | ^~ > In file included from arch/parisc/kernel/asm-offsets.c:22: > arch/parisc/kernel/asm-offsets.c: In function ‘main’: > arch/parisc/kernel/asm-offsets.c:272:36: warning: right shift count >= width of type [-Wshift-count-overflow] > 272 | DEFINE(ASM_PGD_ENTRY, PAGE_OFFSET >> PGDIR_SHIFT); > | ^~ > ./include/linux/kbuild.h:6:62: note: in definition of macro ‘DEFINE’ > 6 | asm volatile("\n.ascii \"->" #sym " %0 " #val "\"" : : "i" (val)) > | ^~~ > make[1]: *** [scripts/Makefile.build:117: arch/parisc/kernel/asm-offsets.s] Error 1 > make: *** [Makefile:1232: prepare0] Error 2 > mroos@rp2470 ~/linux $ git pull && make oldconfig && make && echo OK > Already up to date. > # > # No change to .config > # > CC arch/parisc/kernel/asm-offsets.s > In file included from ./arch/parisc/include/asm/bitops.h:203, > from ./include/linux/bitops.h:32, > from ./include/linux/kernel.h:12, > from ./arch/parisc/include/asm/bug.h:5, > from ./include/linux/bug.h:5, > from ./include/linux/thread_info.h:12, > from ./include/asm-generic/current.h:5, > from ./arch/parisc/include/generated/asm/current.h:1, > from ./include/linux/sched.h:12, > from arch/parisc/kernel/asm-offsets.c:18: > ./include/asm-generic/bitops/__fls.h: In function ‘__fls’: > ./include/asm-generic/bitops/__fls.h:18:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 18 | if (!(word & (~0ul << 32))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:20:8: warning: left shift count >= width of type [-Wshift-count-overflow] > 20 | word <<= 32; > | ^~~ > ./include/asm-generic/bitops/__fls.h:23:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 23 | if (!(word & (~0ul << (BITS_PER_LONG-16)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:27:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 27 | if (!(word & (~0ul << (BITS_PER_LONG-8)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:31:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 31 | if (!(word & (~0ul << (BITS_PER_LONG-4)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:35:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 35 | if (!(word & (~0ul << (BITS_PER_LONG-2)))) { > | ^~ > ./include/asm-generic/bitops/__fls.h:39:21: warning: left shift count >= width of type [-Wshift-count-overflow] > 39 | if (!(word & (~0ul << (BITS_PER_LONG-1)))) > | ^~ > In file included from ./arch/parisc/include/asm/processor.h:17, > from ./arch/parisc/include/asm/thread_info.h:8, > from ./include/linux/thread_info.h:59, > from ./include/asm-generic/current.h:5, > from ./arch/parisc/include/generated/asm/current.h:1, > from ./include/linux/sched.h:12, > from arch/parisc/kernel/asm-offsets.c:18: > ./arch/parisc/include/asm/pdc.h: At top level: > ./arch/parisc/include/asm/pdc.h:75:10: warning: ‘struct pdc_memory_table’ declared inside parameter list will not be visible outside of this definition or declaration > 75 | struct pdc_memory_table *tbl, unsigned long entries); > | ^~~~~~~~~~~~~~~~ > ./arch/parisc/include/asm/pdc.h:74:30: warning: ‘struct pdc_memory_table_raddr’ declared inside parameter list will not be visible outside of this definition or declaration > 74 | int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, > | ^~~~~~~~~~~~~~~~~~~~~~ > In file included from ././include/linux/compiler_types.h:65, > from <command-line>: > ./include/linux/smp.h:34:26: error: requested alignment ‘20’ is not a positive power of 2 > 34 | __aligned(sizeof(struct __call_single_data)); > | ^~~~~~~~~~~~~~~~~~ > ./include/linux/compiler_attributes.h:52:68: note: in definition of macro ‘__aligned’ > 52 | #define __aligned(x) __attribute__((__aligned__(x))) > | ^ > In file included from ./include/linux/mm.h:33, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/parisc/kernel/asm-offsets.c:20: > ./include/linux/pgtable.h: In function ‘pud_index’: > ./include/linux/pgtable.h:59:18: warning: right shift count >= width of type [-Wshift-count-overflow] > 59 | return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); > | ^~ > ./include/linux/pgtable.h: In function ‘pgd_offset_pgd’: > ./include/linux/pgtable.h:66:29: warning: right shift count >= width of type [-Wshift-count-overflow] > 66 | #define pgd_index(a) (((a) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) > | ^~ > ./include/linux/pgtable.h:106:16: note: in expansion of macro ‘pgd_index’ > 106 | return (pgd + pgd_index(address)); > | ^~~~~~~~~ > In file included from ./include/linux/stringhash.h:7, > from ./include/linux/dcache.h:15, > from ./include/linux/fs.h:8, > from ./include/linux/huge_mm.h:8, > from ./include/linux/mm.h:726, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/parisc/kernel/asm-offsets.c:20: > ./include/linux/hash.h: In function ‘hash32_ptr’: > ./include/linux/hash.h:99:14: warning: right shift count >= width of type [-Wshift-count-overflow] > 99 | val ^= (val >> 32); > | ^~ > In file included from arch/parisc/kernel/asm-offsets.c:22: > arch/parisc/kernel/asm-offsets.c: In function ‘main’: > arch/parisc/kernel/asm-offsets.c:272:36: warning: right shift count >= width of type [-Wshift-count-overflow] > 272 | DEFINE(ASM_PGD_ENTRY, PAGE_OFFSET >> PGDIR_SHIFT); > | ^~ > ./include/linux/kbuild.h:6:62: note: in definition of macro ‘DEFINE’ > 6 | asm volatile("\n.ascii \"->" #sym " %0 " #val "\"" : : "i" (val)) > | ^~~ > make[1]: *** [scripts/Makefile.build:117: arch/parisc/kernel/asm-offsets.s] Error 1 > make: *** [Makefile:1232: prepare0] Error 2 > > > .config: > # > # Automatically generated file; DO NOT EDIT. > # Linux/parisc 5.13.0-rc4 Kernel Configuration > # > CONFIG_CC_VERSION_TEXT="gcc (Gentoo 10.2.0-r5 p6) 10.2.0" > CONFIG_CC_IS_GCC=y > CONFIG_GCC_VERSION=100200 > CONFIG_CLANG_VERSION=0 > CONFIG_AS_IS_GNU=y > CONFIG_AS_VERSION=23502 > CONFIG_LD_IS_BFD=y > CONFIG_LD_VERSION=23502 > CONFIG_LLD_VERSION=0 > CONFIG_CC_CAN_LINK=y > CONFIG_CC_CAN_LINK_STATIC=y > CONFIG_CC_HAS_ASM_GOTO=y > CONFIG_CC_HAS_ASM_INLINE=y > CONFIG_IRQ_WORK=y > CONFIG_BUILDTIME_TABLE_SORT=y > > # > # General setup > # > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > # CONFIG_COMPILE_TEST is not set > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_BUILD_SALT="" > CONFIG_HAVE_KERNEL_GZIP=y > CONFIG_HAVE_KERNEL_BZIP2=y > CONFIG_HAVE_KERNEL_LZMA=y > CONFIG_HAVE_KERNEL_XZ=y > CONFIG_HAVE_KERNEL_LZO=y > CONFIG_HAVE_KERNEL_LZ4=y > # CONFIG_KERNEL_GZIP is not set > # CONFIG_KERNEL_BZIP2 is not set > # CONFIG_KERNEL_LZMA is not set > # CONFIG_KERNEL_XZ is not set > CONFIG_KERNEL_LZO=y > # CONFIG_KERNEL_LZ4 is not set > CONFIG_DEFAULT_INIT="" > CONFIG_DEFAULT_HOSTNAME="rp2470" > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > CONFIG_POSIX_MQUEUE=y > CONFIG_POSIX_MQUEUE_SYSCTL=y > # CONFIG_WATCH_QUEUE is not set > CONFIG_CROSS_MEMORY_ATTACH=y > # CONFIG_USELIB is not set > # CONFIG_AUDIT is not set > CONFIG_HAVE_ARCH_AUDITSYSCALL=y > > # > # IRQ subsystem > # > CONFIG_GENERIC_IRQ_PROBE=y > # end of IRQ subsystem > > CONFIG_LEGACY_TIMER_TICK=y > CONFIG_BPF=y > > # > # BPF subsystem > # > CONFIG_BPF_SYSCALL=y > # CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set > # CONFIG_BPF_PRELOAD is not set > # end of BPF subsystem > > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > > # > # CPU/Task time and stats accounting > # > CONFIG_TICK_CPU_ACCOUNTING=y > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_TASKSTATS is not set > # CONFIG_PSI is not set > # end of CPU/Task time and stats accounting > > # > # RCU Subsystem > # > CONFIG_TINY_RCU=y > # CONFIG_RCU_EXPERT is not set > CONFIG_SRCU=y > CONFIG_TINY_SRCU=y > CONFIG_TASKS_RCU_GENERIC=y > CONFIG_TASKS_TRACE_RCU=y > # end of RCU Subsystem > > # CONFIG_IKCONFIG is not set > # CONFIG_IKHEADERS is not set > CONFIG_LOG_BUF_SHIFT=17 > CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 > CONFIG_GENERIC_SCHED_CLOCK=y > > # > # Scheduler features > # > # end of Scheduler features > > CONFIG_CGROUPS=y > # CONFIG_MEMCG is not set > # CONFIG_BLK_CGROUP is not set > # CONFIG_CGROUP_SCHED is not set > # CONFIG_CGROUP_PIDS is not set > # CONFIG_CGROUP_RDMA is not set > # CONFIG_CGROUP_FREEZER is not set > # CONFIG_CGROUP_HUGETLB is not set > # CONFIG_CGROUP_DEVICE is not set > # CONFIG_CGROUP_CPUACCT is not set > CONFIG_CGROUP_BPF=y > # CONFIG_CGROUP_MISC is not set > # CONFIG_CGROUP_DEBUG is not set > CONFIG_SOCK_CGROUP_DATA=y > CONFIG_NAMESPACES=y > CONFIG_UTS_NS=y > CONFIG_IPC_NS=y > CONFIG_USER_NS=y > CONFIG_PID_NS=y > CONFIG_NET_NS=y > # CONFIG_CHECKPOINT_RESTORE is not set > # CONFIG_SCHED_AUTOGROUP is not set > # CONFIG_SYSFS_DEPRECATED is not set > # CONFIG_RELAY is not set > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_BOOT_CONFIG is not set > CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > CONFIG_SYSCTL=y > CONFIG_SYSCTL_EXCEPTION_TRACE=y > CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW=y > # CONFIG_EXPERT is not set > CONFIG_MULTIUSER=y > CONFIG_SGETMASK_SYSCALL=y > CONFIG_SYSFS_SYSCALL=y > CONFIG_FHANDLE=y > CONFIG_POSIX_TIMERS=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_FUTEX_PI=y > CONFIG_EPOLL=y > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_AIO=y > CONFIG_IO_URING=y > CONFIG_ADVISE_SYSCALLS=y > CONFIG_MEMBARRIER=y > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ALL is not set > CONFIG_KALLSYMS_BASE_RELATIVE=y > CONFIG_USERFAULTFD=y > # CONFIG_EMBEDDED is not set > CONFIG_HAVE_PERF_EVENTS=y > > # > # Kernel Performance Events And Counters > # > # CONFIG_PERF_EVENTS is not set > # end of Kernel Performance Events And Counters > > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_SLUB_DEBUG=y > # CONFIG_COMPAT_BRK is not set > # CONFIG_SLAB is not set > CONFIG_SLUB=y > CONFIG_SLAB_MERGE_DEFAULT=y > # CONFIG_SLAB_FREELIST_RANDOM is not set > # CONFIG_SLAB_FREELIST_HARDENED is not set > # CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set > # CONFIG_PROFILING is not set > # end of General setup > > CONFIG_PARISC=y > CONFIG_CPU_BIG_ENDIAN=y > CONFIG_MMU=y > CONFIG_STACK_GROWSUP=y > CONFIG_ARCH_DEFCONFIG="arch/parisc/configs/generic-64bit_defconfig" > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_PGTABLE_LEVELS=3 > > # > # Processor type and features > # > # CONFIG_PA7000 is not set > # CONFIG_PA7100LC is not set > # CONFIG_PA7200 is not set > # CONFIG_PA7300LC is not set > CONFIG_PA8X00=y > CONFIG_PA20=y > CONFIG_PREFETCH=y > # CONFIG_MLONGCALLS is not set > CONFIG_64BIT=y > CONFIG_PARISC_PAGE_SIZE_4KB=y > CONFIG_PARISC_SELF_EXTRACT=y > # CONFIG_SMP is not set > CONFIG_IRQSTACKS=y > CONFIG_ARCH_SELECT_MEMORY_MODEL=y > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_ARCH_FLATMEM_ENABLE=y > CONFIG_ARCH_SPARSEMEM_DEFAULT=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_COMPAT=y > CONFIG_SYSVIPC_COMPAT=y > CONFIG_AUDIT_ARCH=y > # CONFIG_KEXEC is not set > # CONFIG_KEXEC_FILE is not set > # end of Processor type and features > > # > # Firmware Drivers > # > # CONFIG_FW_CFG_SYSFS is not set > # CONFIG_GOOGLE_FIRMWARE is not set > > # > # Tegra firmware driver > # > # end of Tegra firmware driver > # end of Firmware Drivers > > # > # Bus options (PCI, PCMCIA, EISA, GSC, ISA) > # > # CONFIG_GSC is not set > CONFIG_PCI_LBA=y > CONFIG_IOSAPIC=y > CONFIG_IOMMU_SBA=y > # end of Bus options (PCI, PCMCIA, EISA, GSC, ISA) > > # > # PA-RISC specific drivers > # > CONFIG_SUPERIO=y > CONFIG_CHASSIS_LCD_LED=y > CONFIG_PDC_CHASSIS=y > CONFIG_PDC_CHASSIS_WARN=y > CONFIG_PDC_STABLE=y > # end of PA-RISC specific drivers > > # > # General architecture-dependent options > # > CONFIG_SET_FS=y > # CONFIG_KPROBES is not set > CONFIG_JUMP_LABEL=y > # CONFIG_STATIC_KEYS_SELFTEST is not set > CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_KPROBES_ON_FTRACE=y > CONFIG_HAVE_ARCH_TRACEHOOK=y > CONFIG_GENERIC_SMP_IDLE_THREAD=y > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > CONFIG_HAVE_ARCH_JUMP_LABEL=y > CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y > CONFIG_HAVE_ARCH_SECCOMP=y > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y > CONFIG_SECCOMP=y > CONFIG_SECCOMP_FILTER=y > # CONFIG_SECCOMP_CACHE_DEBUG is not set > CONFIG_LTO_NONE=y > CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y > CONFIG_HAVE_MOD_ARCH_SPECIFIC=y > CONFIG_MODULES_USE_ELF_RELA=y > CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y > CONFIG_ARCH_HAS_ELF_RANDOMIZE=y > CONFIG_HAVE_ARCH_HASH=y > CONFIG_CLONE_BACKWARDS=y > CONFIG_COMPAT_32BIT_TIME=y > CONFIG_CPU_NO_EFFICIENT_FFS=y > CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y > CONFIG_STRICT_KERNEL_RWX=y > > # > # GCOV-based kernel profiling > # > # end of GCOV-based kernel profiling > # end of General architecture-dependent options > > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > # CONFIG_MODULE_FORCE_LOAD is not set > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > # CONFIG_MODULE_SIG is not set > CONFIG_MODULE_COMPRESS_NONE=y > # CONFIG_MODULE_COMPRESS_GZIP is not set > # CONFIG_MODULE_COMPRESS_XZ is not set > # CONFIG_MODULE_COMPRESS_ZSTD is not set > # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set > CONFIG_MODPROBE_PATH="/sbin/modprobe" > CONFIG_INIT_ALL_POSSIBLE=y > CONFIG_BLOCK=y > CONFIG_BLK_SCSI_REQUEST=y > CONFIG_BLK_DEV_BSG=y > # CONFIG_BLK_DEV_BSGLIB is not set > # CONFIG_BLK_DEV_INTEGRITY is not set > # CONFIG_BLK_DEV_ZONED is not set > # CONFIG_BLK_CMDLINE_PARSER is not set > # CONFIG_BLK_WBT is not set > # CONFIG_BLK_SED_OPAL is not set > # CONFIG_BLK_INLINE_ENCRYPTION is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_EFI_PARTITION=y > # end of Partition Types > > CONFIG_BLOCK_COMPAT=y > CONFIG_BLK_MQ_PCI=y > > # > # IO Schedulers > # > CONFIG_MQ_IOSCHED_DEADLINE=m > # CONFIG_MQ_IOSCHED_KYBER is not set > # CONFIG_IOSCHED_BFQ is not set > # end of IO Schedulers > > CONFIG_INLINE_SPIN_UNLOCK_IRQ=y > CONFIG_INLINE_READ_UNLOCK=y > CONFIG_INLINE_READ_UNLOCK_IRQ=y > CONFIG_INLINE_WRITE_UNLOCK=y > CONFIG_INLINE_WRITE_UNLOCK_IRQ=y > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_COMPAT_BINFMT_ELF=y > CONFIG_ELFCORE=y > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > CONFIG_BINFMT_SCRIPT=y > CONFIG_BINFMT_MISC=y > CONFIG_COREDUMP=y > # end of Executable file formats > > # > # Memory Management options > # > CONFIG_SELECT_MEMORY_MODEL=y > # CONFIG_FLATMEM_MANUAL is not set > CONFIG_SPARSEMEM_MANUAL=y > CONFIG_SPARSEMEM=y > CONFIG_SPARSEMEM_EXTREME=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > # CONFIG_COMPACTION is not set > # CONFIG_PAGE_REPORTING is not set > CONFIG_PHYS_ADDR_T_64BIT=y > CONFIG_VIRT_TO_BUS=y > # CONFIG_KSM is not set > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y > # CONFIG_MEMORY_FAILURE is not set > CONFIG_NEED_PER_CPU_KM=y > # CONFIG_CLEANCACHE is not set > # CONFIG_FRONTSWAP is not set > # CONFIG_CMA is not set > # CONFIG_ZPOOL is not set > # CONFIG_ZBUD is not set > # CONFIG_ZSMALLOC is not set > CONFIG_STACK_MAX_DEFAULT_SIZE_MB=100 > # CONFIG_IDLE_PAGE_TRACKING is not set > # CONFIG_PERCPU_STATS is not set > > # > # GUP_TEST needs to have DEBUG_FS enabled > # > # end of Memory Management options > > CONFIG_NET=y > CONFIG_SKB_EXTENSIONS=y > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_PACKET_DIAG=m > CONFIG_UNIX=y > CONFIG_UNIX_SCM=y > CONFIG_UNIX_DIAG=m > # CONFIG_TLS is not set > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_XFRM_INTERFACE is not set > # CONFIG_XFRM_SUB_POLICY is not set > # CONFIG_XFRM_MIGRATE is not set > # CONFIG_XFRM_STATISTICS is not set > # CONFIG_NET_KEY is not set > # CONFIG_XDP_SOCKETS is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE_DEMUX is not set > CONFIG_NET_IP_TUNNEL=m > # CONFIG_IP_MROUTE is not set > CONFIG_SYN_COOKIES=y > # CONFIG_NET_IPVTI is not set > # CONFIG_NET_FOU is not set > # CONFIG_NET_FOU_IP_TUNNELS is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > CONFIG_INET_TUNNEL=m > CONFIG_INET_DIAG=m > CONFIG_INET_TCP_DIAG=m > CONFIG_INET_UDP_DIAG=m > CONFIG_INET_RAW_DIAG=m > # CONFIG_INET_DIAG_DESTROY is not set > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_CUBIC=y > CONFIG_DEFAULT_TCP_CONG="cubic" > # CONFIG_TCP_MD5SIG is not set > CONFIG_IPV6=y > CONFIG_IPV6_ROUTER_PREF=y > CONFIG_IPV6_ROUTE_INFO=y > CONFIG_IPV6_OPTIMISTIC_DAD=y > # CONFIG_INET6_AH is not set > # CONFIG_INET6_ESP is not set > # CONFIG_INET6_IPCOMP is not set > CONFIG_IPV6_MIP6=m > CONFIG_INET6_TUNNEL=m > # CONFIG_IPV6_VTI is not set > CONFIG_IPV6_SIT=m > CONFIG_IPV6_SIT_6RD=y > CONFIG_IPV6_NDISC_NODETYPE=y > CONFIG_IPV6_TUNNEL=m > # CONFIG_IPV6_MULTIPLE_TABLES is not set > # CONFIG_IPV6_MROUTE is not set > # CONFIG_IPV6_SEG6_LWTUNNEL is not set > # CONFIG_IPV6_SEG6_HMAC is not set > # CONFIG_IPV6_RPL_LWTUNNEL is not set > # CONFIG_MPTCP is not set > # CONFIG_NETWORK_SECMARK is not set > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set > # CONFIG_NETFILTER is not set > # CONFIG_BPFILTER is not set > # CONFIG_IP_DCCP is not set > # CONFIG_IP_SCTP is not set > # CONFIG_RDS is not set > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_L2TP is not set > # CONFIG_BRIDGE is not set > # CONFIG_NET_DSA is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_PHONET is not set > # CONFIG_6LOWPAN is not set > # CONFIG_IEEE802154 is not set > # CONFIG_NET_SCHED is not set > # CONFIG_DCB is not set > # CONFIG_BATMAN_ADV is not set > # CONFIG_OPENVSWITCH is not set > # CONFIG_VSOCKETS is not set > CONFIG_NETLINK_DIAG=m > # CONFIG_MPLS is not set > # CONFIG_NET_NSH is not set > # CONFIG_HSR is not set > # CONFIG_NET_SWITCHDEV is not set > # CONFIG_NET_L3_MASTER_DEV is not set > # CONFIG_QRTR is not set > # CONFIG_NET_NCSI is not set > # CONFIG_CGROUP_NET_PRIO is not set > # CONFIG_CGROUP_NET_CLASSID is not set > CONFIG_NET_RX_BUSY_POLL=y > CONFIG_BQL=y > CONFIG_BPF_STREAM_PARSER=y > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # end of Network testing > # end of Networking options > > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_BT is not set > # CONFIG_AF_RXRPC is not set > # CONFIG_AF_KCM is not set > CONFIG_STREAM_PARSER=y > # CONFIG_WIRELESS is not set > # CONFIG_RFKILL is not set > # CONFIG_NET_9P is not set > # CONFIG_CAIF is not set > # CONFIG_CEPH_LIB is not set > # CONFIG_NFC is not set > # CONFIG_PSAMPLE is not set > # CONFIG_NET_IFE is not set > # CONFIG_LWTUNNEL is not set > CONFIG_DST_CACHE=y > CONFIG_GRO_CELLS=y > CONFIG_NET_SOCK_MSG=y > # CONFIG_FAILOVER is not set > CONFIG_ETHTOOL_NETLINK=y > > # > # Device Drivers > # > CONFIG_HAVE_PCI=y > CONFIG_PCI=y > # CONFIG_PCIEPORTBUS is not set > CONFIG_PCIEASPM=y > CONFIG_PCIEASPM_DEFAULT=y > # CONFIG_PCIEASPM_POWERSAVE is not set > # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set > # CONFIG_PCIEASPM_PERFORMANCE is not set > # CONFIG_PCIE_PTM is not set > # CONFIG_PCI_MSI is not set > CONFIG_PCI_QUIRKS=y > # CONFIG_PCI_DEBUG is not set > # CONFIG_PCI_STUB is not set > # CONFIG_PCI_IOV is not set > # CONFIG_PCI_PRI is not set > # CONFIG_PCI_PASID is not set > # CONFIG_HOTPLUG_PCI is not set > > # > # PCI controller drivers > # > > # > # DesignWare PCI Core Support > # > # end of DesignWare PCI Core Support > > # > # Mobiveil PCIe Core Support > # > # end of Mobiveil PCIe Core Support > > # > # Cadence PCIe controllers support > # > # end of Cadence PCIe controllers support > # end of PCI controller drivers > > # > # PCI Endpoint > # > # CONFIG_PCI_ENDPOINT is not set > # end of PCI Endpoint > > # > # PCI switch controller drivers > # > # CONFIG_PCI_SW_SWITCHTEC is not set > # end of PCI switch controller drivers > > # CONFIG_CXL_BUS is not set > # CONFIG_PCCARD is not set > # CONFIG_RAPIDIO is not set > > # > # Generic Driver Options > # > # CONFIG_UEVENT_HELPER is not set > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > > # > # Firmware loader > # > CONFIG_FW_LOADER=y > CONFIG_EXTRA_FIRMWARE="" > # CONFIG_FW_LOADER_USER_HELPER is not set > # CONFIG_FW_LOADER_COMPRESS is not set > # end of Firmware loader > > CONFIG_ALLOW_DEV_COREDUMP=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set > # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set > CONFIG_GENERIC_CPU_DEVICES=y > # end of Generic Driver Options > > # > # Bus devices > # > # CONFIG_MHI_BUS is not set > # end of Bus devices > > # CONFIG_CONNECTOR is not set > # CONFIG_GNSS is not set > # CONFIG_MTD is not set > # CONFIG_OF is not set > CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y > # CONFIG_PARPORT is not set > CONFIG_BLK_DEV=y > # CONFIG_BLK_DEV_NULL_BLK is not set > CONFIG_CDROM=m > # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set > CONFIG_BLK_DEV_LOOP=m > CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_DRBD is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_RAM is not set > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > # CONFIG_BLK_DEV_RBD is not set > # CONFIG_BLK_DEV_RSXX is not set > > # > # NVME Support > # > # CONFIG_BLK_DEV_NVME is not set > # CONFIG_NVME_FC is not set > # CONFIG_NVME_TCP is not set > # end of NVME Support > > # > # Misc devices > # > # CONFIG_DUMMY_IRQ is not set > # CONFIG_PHANTOM is not set > # CONFIG_TIFM_CORE is not set > # CONFIG_ENCLOSURE_SERVICES is not set > # CONFIG_HP_ILO is not set > # CONFIG_SRAM is not set > # CONFIG_DW_XDATA_PCIE is not set > # CONFIG_PCI_ENDPOINT_TEST is not set > # CONFIG_XILINX_SDFEC is not set > # CONFIG_C2PORT is not set > > # > # EEPROM support > # > # CONFIG_EEPROM_93CX6 is not set > # end of EEPROM support > > # CONFIG_CB710_CORE is not set > > # > # Texas Instruments shared transport line discipline > # > # end of Texas Instruments shared transport line discipline > > # > # Altera FPGA firmware download module (requires I2C) > # > # CONFIG_GENWQE is not set > # CONFIG_ECHO is not set > # CONFIG_MISC_ALCOR_PCI is not set > # CONFIG_MISC_RTSX_PCI is not set > # CONFIG_HABANA_AI is not set > # CONFIG_PVPANIC is not set > # end of Misc devices > > CONFIG_HAVE_IDE=y > # CONFIG_IDE is not set > > # > # SCSI device support > # > CONFIG_SCSI_MOD=y > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > CONFIG_SCSI_DMA=y > # CONFIG_SCSI_PROC_FS is not set > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > CONFIG_CHR_DEV_ST=m > CONFIG_BLK_DEV_SR=m > CONFIG_CHR_DEV_SG=y > CONFIG_CHR_DEV_SCH=m > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > CONFIG_SCSI_SCAN_ASYNC=y > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=y > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > # CONFIG_SCSI_SRP_ATTRS is not set > # end of SCSI Transports > > CONFIG_SCSI_LOWLEVEL=y > # CONFIG_ISCSI_TCP is not set > # CONFIG_ISCSI_BOOT_SYSFS is not set > # CONFIG_SCSI_CXGB3_ISCSI is not set > # CONFIG_SCSI_CXGB4_ISCSI is not set > # CONFIG_SCSI_BNX2_ISCSI is not set > # CONFIG_BE2ISCSI is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_HPSA is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_3W_SAS is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > CONFIG_SCSI_AIC7XXX=m > CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 > CONFIG_AIC7XXX_RESET_DELAY_MS=5000 > CONFIG_AIC7XXX_DEBUG_ENABLE=y > CONFIG_AIC7XXX_DEBUG_MASK=0 > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_MVSAS is not set > # CONFIG_SCSI_MVUMI is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_SCSI_ESAS2R is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > # CONFIG_SCSI_MPT3SAS is not set > # CONFIG_SCSI_MPT2SAS is not set > # CONFIG_SCSI_SMARTPQI is not set > # CONFIG_SCSI_UFSHCD is not set > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_MYRB is not set > # CONFIG_SCSI_SNIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_FDOMAIN_PCI is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_STEX is not set > CONFIG_SCSI_SYM53C8XX_2=y > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 > CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 > CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 > CONFIG_SCSI_SYM53C8XX_MMIO=y > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_WD719X is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_PMCRAID is not set > # CONFIG_SCSI_PM8001 is not set > # CONFIG_SCSI_DH is not set > # end of SCSI device support > > # CONFIG_ATA is not set > # CONFIG_MD is not set > # CONFIG_TARGET_CORE is not set > CONFIG_FUSION=y > CONFIG_FUSION_SPI=m > # CONFIG_FUSION_SAS is not set > CONFIG_FUSION_MAX_SGE=128 > CONFIG_FUSION_CTL=m > # CONFIG_FUSION_LOGGING is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_FIREWIRE is not set > # CONFIG_FIREWIRE_NOSY is not set > # end of IEEE 1394 (FireWire) support > > CONFIG_NETDEVICES=y > CONFIG_NET_CORE=y > # CONFIG_BONDING is not set > # CONFIG_DUMMY is not set > # CONFIG_WIREGUARD is not set > # CONFIG_EQUALIZER is not set > # CONFIG_NET_FC is not set > # CONFIG_NET_TEAM is not set > # CONFIG_MACVLAN is not set > # CONFIG_IPVLAN is not set > # CONFIG_VXLAN is not set > # CONFIG_GENEVE is not set > # CONFIG_BAREUDP is not set > # CONFIG_GTP is not set > # CONFIG_MACSEC is not set > CONFIG_NETCONSOLE=y > CONFIG_NETPOLL=y > CONFIG_NET_POLL_CONTROLLER=y > CONFIG_TUN=m > # CONFIG_TUN_VNET_CROSS_LE is not set > # CONFIG_VETH is not set > # CONFIG_NLMON is not set > # CONFIG_ARCNET is not set > CONFIG_ETHERNET=y > # CONFIG_NET_VENDOR_3COM is not set > # CONFIG_NET_VENDOR_ADAPTEC is not set > # CONFIG_NET_VENDOR_AGERE is not set > # CONFIG_NET_VENDOR_ALACRITECH is not set > # CONFIG_NET_VENDOR_ALTEON is not set > # CONFIG_ALTERA_TSE is not set > # CONFIG_NET_VENDOR_AMAZON is not set > # CONFIG_NET_VENDOR_AMD is not set > # CONFIG_NET_VENDOR_AQUANTIA is not set > # CONFIG_NET_VENDOR_ARC is not set > # CONFIG_NET_VENDOR_ATHEROS is not set > # CONFIG_NET_VENDOR_BROADCOM is not set > # CONFIG_NET_VENDOR_BROCADE is not set > # CONFIG_NET_VENDOR_CADENCE is not set > # CONFIG_NET_VENDOR_CAVIUM is not set > # CONFIG_NET_VENDOR_CHELSIO is not set > # CONFIG_NET_VENDOR_CISCO is not set > # CONFIG_NET_VENDOR_CORTINA is not set > # CONFIG_DNET is not set > CONFIG_NET_VENDOR_DEC=y > CONFIG_NET_TULIP=y > # CONFIG_DE2104X is not set > CONFIG_TULIP=y > CONFIG_TULIP_MWI=y > CONFIG_TULIP_MMIO=y > CONFIG_TULIP_NAPI=y > CONFIG_TULIP_NAPI_HW_MITIGATION=y > # CONFIG_DE4X5 is not set > # CONFIG_WINBOND_840 is not set > # CONFIG_DM9102 is not set > # CONFIG_ULI526X is not set > # CONFIG_NET_VENDOR_DLINK is not set > # CONFIG_NET_VENDOR_EMULEX is not set > # CONFIG_NET_VENDOR_EZCHIP is not set > # CONFIG_NET_VENDOR_GOOGLE is not set > # CONFIG_NET_VENDOR_HUAWEI is not set > # CONFIG_NET_VENDOR_INTEL is not set > # CONFIG_NET_VENDOR_MICROSOFT is not set > # CONFIG_JME is not set > # CONFIG_NET_VENDOR_MARVELL is not set > # CONFIG_NET_VENDOR_MELLANOX is not set > # CONFIG_NET_VENDOR_MICREL is not set > # CONFIG_NET_VENDOR_MICROCHIP is not set > # CONFIG_NET_VENDOR_MICROSEMI is not set > # CONFIG_NET_VENDOR_MYRI is not set > # CONFIG_FEALNX is not set > # CONFIG_NET_VENDOR_NATSEMI is not set > # CONFIG_NET_VENDOR_NETERION is not set > # CONFIG_NET_VENDOR_NETRONOME is not set > # CONFIG_NET_VENDOR_NI is not set > # CONFIG_NET_VENDOR_NVIDIA is not set > # CONFIG_NET_VENDOR_OKI is not set > # CONFIG_ETHOC is not set > # CONFIG_NET_VENDOR_PACKET_ENGINES is not set > # CONFIG_NET_VENDOR_PENSANDO is not set > # CONFIG_NET_VENDOR_QLOGIC is not set > # CONFIG_NET_VENDOR_QUALCOMM is not set > # CONFIG_NET_VENDOR_RDC is not set > # CONFIG_NET_VENDOR_REALTEK is not set > # CONFIG_NET_VENDOR_RENESAS is not set > # CONFIG_NET_VENDOR_ROCKER is not set > # CONFIG_NET_VENDOR_SAMSUNG is not set > # CONFIG_NET_VENDOR_SEEQ is not set > # CONFIG_NET_VENDOR_SOLARFLARE is not set > # CONFIG_NET_VENDOR_SILAN is not set > # CONFIG_NET_VENDOR_SIS is not set > # CONFIG_NET_VENDOR_SMSC is not set > # CONFIG_NET_VENDOR_SOCIONEXT is not set > # CONFIG_NET_VENDOR_STMICRO is not set > # CONFIG_NET_VENDOR_SUN is not set > # CONFIG_NET_VENDOR_SYNOPSYS is not set > # CONFIG_NET_VENDOR_TEHUTI is not set > # CONFIG_NET_VENDOR_TI is not set > # CONFIG_NET_VENDOR_VIA is not set > # CONFIG_NET_VENDOR_WIZNET is not set > # CONFIG_NET_VENDOR_XILINX is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PHYLIB is not set > # CONFIG_MDIO_DEVICE is not set > > # > # PCS device drivers > # > # end of PCS device drivers > > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Host-side USB support is needed for USB Network Adapter support > # > # CONFIG_WLAN is not set > # CONFIG_WAN is not set > # CONFIG_WWAN is not set > # CONFIG_VMXNET3 is not set > # CONFIG_NET_FAILOVER is not set > # CONFIG_ISDN is not set > # CONFIG_NVM is not set > > # > # Input device support > # > CONFIG_INPUT=y > # CONFIG_INPUT_FF_MEMLESS is not set > # CONFIG_INPUT_SPARSEKMAP is not set > # CONFIG_INPUT_MATRIXKMAP is not set > > # > # Userland interfaces > # > # CONFIG_INPUT_MOUSEDEV is not set > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > # CONFIG_INPUT_KEYBOARD is not set > # CONFIG_INPUT_MOUSE is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TABLET is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > # CONFIG_RMI4_CORE is not set > > # > # Hardware I/O ports > # > # CONFIG_SERIO is not set > # CONFIG_GAMEPORT is not set > # end of Hardware I/O ports > # end of Input device support > > # > # Character devices > # > CONFIG_TTY=y > CONFIG_VT=y > CONFIG_CONSOLE_TRANSLATIONS=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_VT_HW_CONSOLE_BINDING is not set > CONFIG_UNIX98_PTYS=y > # CONFIG_LEGACY_PTYS is not set > # CONFIG_LDISC_AUTOLOAD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_EARLYCON=y > CONFIG_SERIAL_8250=y > # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set > # CONFIG_SERIAL_8250_16550A_VARIANTS is not set > # CONFIG_SERIAL_8250_FINTEK is not set > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_PCI=y > # CONFIG_SERIAL_8250_EXAR is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > # CONFIG_SERIAL_8250_DW is not set > # CONFIG_SERIAL_8250_RT288X is not set > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_UARTLITE is not set > # CONFIG_PDC_CONSOLE is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > # CONFIG_SERIAL_JSM is not set > # CONFIG_SERIAL_SCCNXP is not set > # CONFIG_SERIAL_ALTERA_JTAGUART is not set > # CONFIG_SERIAL_ALTERA_UART is not set > # CONFIG_SERIAL_ARC is not set > # CONFIG_SERIAL_RP2 is not set > # CONFIG_SERIAL_FSL_LPUART is not set > # CONFIG_SERIAL_FSL_LINFLEXUART is not set > # end of Serial drivers > > # CONFIG_SERIAL_NONSTANDARD is not set > # CONFIG_N_GSM is not set > # CONFIG_NOZOMI is not set > # CONFIG_NULL_TTY is not set > # CONFIG_SERIAL_DEV_BUS is not set > # CONFIG_VIRTIO_CONSOLE is not set > # CONFIG_IPMI_HANDLER is not set > # CONFIG_HW_RANDOM is not set > # CONFIG_APPLICOM is not set > CONFIG_DEVMEM=y > # CONFIG_RAW_DRIVER is not set > CONFIG_DEVPORT=y > # CONFIG_TCG_TPM is not set > # CONFIG_XILLYBUS is not set > # end of Character devices > > CONFIG_RANDOM_TRUST_BOOTLOADER=y > > # > # I2C support > # > # CONFIG_I2C is not set > # end of I2C support > > # CONFIG_I3C is not set > # CONFIG_SPI is not set > # CONFIG_SPMI is not set > # CONFIG_HSI is not set > # CONFIG_PPS is not set > > # > # PTP clock support > # > # CONFIG_PTP_1588_CLOCK is not set > > # > # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. > # > # end of PTP clock support > > # CONFIG_PINCTRL is not set > # CONFIG_GPIOLIB is not set > # CONFIG_W1 is not set > # CONFIG_POWER_RESET is not set > # CONFIG_POWER_SUPPLY is not set > # CONFIG_HWMON is not set > # CONFIG_THERMAL is not set > # CONFIG_WATCHDOG is not set > CONFIG_SSB_POSSIBLE=y > # CONFIG_SSB is not set > CONFIG_BCMA_POSSIBLE=y > # CONFIG_BCMA is not set > > # > # Multifunction device drivers > # > # CONFIG_MFD_MADERA is not set > # CONFIG_HTC_PASIC3 is not set > # CONFIG_LPC_ICH is not set > # CONFIG_LPC_SCH is not set > # CONFIG_MFD_INTEL_PMT is not set > # CONFIG_MFD_JANZ_CMODIO is not set > # CONFIG_MFD_KEMPLD is not set > # CONFIG_MFD_MT6397 is not set > # CONFIG_MFD_RDC321X is not set > # CONFIG_MFD_SM501 is not set > # CONFIG_MFD_SYSCON is not set > # CONFIG_MFD_TI_AM335X_TSCADC is not set > # CONFIG_MFD_TQMX86 is not set > # CONFIG_MFD_VX855 is not set > # end of Multifunction device drivers > > # CONFIG_REGULATOR is not set > # CONFIG_RC_CORE is not set > # CONFIG_MEDIA_CEC_SUPPORT is not set > # CONFIG_MEDIA_SUPPORT is not set > > # > # Graphics support > # > # CONFIG_AGP is not set > CONFIG_VGA_ARB=y > CONFIG_VGA_ARB_MAX_GPUS=16 > # CONFIG_DRM is not set > > # > # ARM devices > # > # end of ARM devices > > # > # Frame buffer Devices > # > # CONFIG_FB is not set > # end of Frame buffer Devices > > # > # Backlight & LCD device support > # > # CONFIG_LCD_CLASS_DEVICE is not set > # CONFIG_BACKLIGHT_CLASS_DEVICE is not set > # end of Backlight & LCD device support > > # > # Console display driver support > # > CONFIG_DUMMY_CONSOLE=y > CONFIG_DUMMY_CONSOLE_COLUMNS=160 > CONFIG_DUMMY_CONSOLE_ROWS=64 > CONFIG_STI_CONSOLE=y > # end of Console display driver support > # end of Graphics support > > # CONFIG_SOUND is not set > > # > # HID support > # > # CONFIG_HID is not set > # end of HID support > > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > # CONFIG_USB_SUPPORT is not set > # CONFIG_MMC is not set > # CONFIG_MEMSTICK is not set > # CONFIG_NEW_LEDS is not set > # CONFIG_ACCESSIBILITY is not set > # CONFIG_INFINIBAND is not set > CONFIG_RTC_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > CONFIG_RTC_SYSTOHC=y > CONFIG_RTC_SYSTOHC_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > CONFIG_RTC_NVMEM=y > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > CONFIG_RTC_INTF_DEV_UIE_EMUL=y > # CONFIG_RTC_DRV_TEST is not set > > # > # I2C RTC drivers > # > > # > # SPI RTC drivers > # > > # > # SPI and I2C RTC drivers > # > > # > # Platform RTC drivers > # > # CONFIG_RTC_DRV_DS1286 is not set > # CONFIG_RTC_DRV_DS1511 is not set > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_DS1685_FAMILY is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_DS2404 is not set > # CONFIG_RTC_DRV_STK17TA8 is not set > # CONFIG_RTC_DRV_M48T86 is not set > # CONFIG_RTC_DRV_M48T35 is not set > # CONFIG_RTC_DRV_M48T59 is not set > # CONFIG_RTC_DRV_MSM6242 is not set > # CONFIG_RTC_DRV_BQ4802 is not set > # CONFIG_RTC_DRV_RP5C01 is not set > # CONFIG_RTC_DRV_V3020 is not set > > # > # on-CPU RTC drivers > # > CONFIG_RTC_DRV_GENERIC=y > # CONFIG_RTC_DRV_FTRTC010 is not set > > # > # HID Sensor RTC drivers > # > # CONFIG_RTC_DRV_GOLDFISH is not set > # CONFIG_DMADEVICES is not set > > # > # DMABUF options > # > # CONFIG_SYNC_FILE is not set > # CONFIG_DMABUF_MOVE_NOTIFY is not set > # CONFIG_DMABUF_DEBUG is not set > # CONFIG_DMABUF_HEAPS is not set > # end of DMABUF options > > # CONFIG_AUXDISPLAY is not set > # CONFIG_UIO is not set > # CONFIG_VFIO is not set > # CONFIG_VIRT_DRIVERS is not set > # CONFIG_VIRTIO_MENU is not set > # CONFIG_VDPA is not set > # CONFIG_VHOST_MENU is not set > > # > # Microsoft Hyper-V guest support > # > # end of Microsoft Hyper-V guest support > > # CONFIG_GREYBUS is not set > # CONFIG_COMEDI is not set > # CONFIG_STAGING is not set > # CONFIG_GOLDFISH is not set > # CONFIG_COMMON_CLK is not set > # CONFIG_HWSPINLOCK is not set > # CONFIG_MAILBOX is not set > # CONFIG_IOMMU_SUPPORT is not set > > # > # Remoteproc drivers > # > # CONFIG_REMOTEPROC is not set > # end of Remoteproc drivers > > # > # Rpmsg drivers > # > # CONFIG_RPMSG_VIRTIO is not set > # end of Rpmsg drivers > > # > # SOC (System On Chip) specific Drivers > # > > # > # Amlogic SoC drivers > # > # end of Amlogic SoC drivers > > # > # Broadcom SoC drivers > # > # end of Broadcom SoC drivers > > # > # NXP/Freescale QorIQ SoC drivers > # > # end of NXP/Freescale QorIQ SoC drivers > > # > # i.MX SoC drivers > # > # end of i.MX SoC drivers > > # > # Enable LiteX SoC Builder specific drivers > # > # end of Enable LiteX SoC Builder specific drivers > > # > # Qualcomm SoC drivers > # > # end of Qualcomm SoC drivers > > # CONFIG_SOC_TI is not set > > # > # Xilinx SoC drivers > # > # end of Xilinx SoC drivers > # end of SOC (System On Chip) specific Drivers > > # CONFIG_PM_DEVFREQ is not set > # CONFIG_EXTCON is not set > # CONFIG_MEMORY is not set > # CONFIG_IIO is not set > # CONFIG_NTB is not set > # CONFIG_VME_BUS is not set > # CONFIG_PWM is not set > > # > # IRQ chip support > # > # end of IRQ chip support > > # CONFIG_IPACK_BUS is not set > # CONFIG_RESET_CONTROLLER is not set > > # > # PHY Subsystem > # > # CONFIG_GENERIC_PHY is not set > # CONFIG_BCM_KONA_USB2_PHY is not set > # CONFIG_PHY_PXA_28NM_HSIC is not set > # CONFIG_PHY_PXA_28NM_USB2 is not set > # end of PHY Subsystem > > # CONFIG_POWERCAP is not set > # CONFIG_MCB is not set > # CONFIG_RAS is not set > # CONFIG_USB4 is not set > > # > # Android > # > # CONFIG_ANDROID is not set > # end of Android > > # CONFIG_LIBNVDIMM is not set > # CONFIG_DAX is not set > CONFIG_NVMEM=y > CONFIG_NVMEM_SYSFS=y > # CONFIG_NVMEM_RMEM is not set > > # > # HW tracing support > # > # CONFIG_STM is not set > # CONFIG_INTEL_TH is not set > # end of HW tracing support > > # CONFIG_FPGA is not set > # CONFIG_SIOX is not set > # CONFIG_SLIMBUS is not set > # CONFIG_INTERCONNECT is not set > # CONFIG_COUNTER is not set > # end of Device Drivers > > # > # File systems > # > # CONFIG_VALIDATE_FS_PARSER is not set > CONFIG_FS_IOMAP=y > # CONFIG_EXT2_FS is not set > # CONFIG_EXT3_FS is not set > CONFIG_EXT4_FS=y > CONFIG_EXT4_USE_FOR_EXT2=y > CONFIG_EXT4_FS_POSIX_ACL=y > CONFIG_EXT4_FS_SECURITY=y > # CONFIG_EXT4_DEBUG is not set > CONFIG_JBD2=y > # CONFIG_JBD2_DEBUG is not set > CONFIG_FS_MBCACHE=y > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_BTRFS_FS is not set > # CONFIG_NILFS2_FS is not set > # CONFIG_F2FS_FS is not set > # CONFIG_FS_DAX is not set > CONFIG_FS_POSIX_ACL=y > CONFIG_EXPORTFS=y > # CONFIG_EXPORTFS_BLOCK_OPS is not set > CONFIG_FILE_LOCKING=y > CONFIG_MANDATORY_FILE_LOCKING=y > # CONFIG_FS_ENCRYPTION is not set > # CONFIG_FS_VERITY is not set > CONFIG_FSNOTIFY=y > CONFIG_DNOTIFY=y > CONFIG_INOTIFY_USER=y > CONFIG_FANOTIFY=y > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS4_FS is not set > CONFIG_AUTOFS_FS=m > CONFIG_FUSE_FS=m > CONFIG_CUSE=m > # CONFIG_VIRTIO_FS is not set > # CONFIG_OVERLAY_FS is not set > > # > # Caches > # > # CONFIG_FSCACHE is not set > # end of Caches > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > # end of CD-ROM/DVD Filesystems > > # > # DOS/FAT/EXFAT/NT Filesystems > # > # CONFIG_MSDOS_FS is not set > # CONFIG_VFAT_FS is not set > # CONFIG_EXFAT_FS is not set > # CONFIG_NTFS_FS is not set > # end of DOS/FAT/EXFAT/NT Filesystems > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > # CONFIG_PROC_KCORE is not set > CONFIG_PROC_SYSCTL=y > CONFIG_PROC_PAGE_MONITOR=y > # CONFIG_PROC_CHILDREN is not set > CONFIG_KERNFS=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > CONFIG_TMPFS_POSIX_ACL=y > CONFIG_TMPFS_XATTR=y > # CONFIG_TMPFS_INODE64 is not set > CONFIG_ARCH_SUPPORTS_HUGETLBFS=y > CONFIG_HUGETLBFS=y > CONFIG_HUGETLB_PAGE=y > CONFIG_MEMFD_CREATE=y > # CONFIG_CONFIGFS_FS is not set > # end of Pseudo filesystems > > # CONFIG_MISC_FILESYSTEMS is not set > # CONFIG_NETWORK_FILESYSTEMS is not set > # CONFIG_NLS is not set > # CONFIG_UNICODE is not set > CONFIG_IO_WQ=y > # end of File systems > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY_DMESG_RESTRICT is not set > # CONFIG_SECURITY is not set > # CONFIG_SECURITYFS is not set > CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y > CONFIG_HARDENED_USERCOPY=y > CONFIG_HARDENED_USERCOPY_FALLBACK=y > # CONFIG_STATIC_USERMODEHELPER is not set > CONFIG_DEFAULT_SECURITY_DAC=y > CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor" > > # > # Kernel hardening options > # > > # > # Memory initialization > # > CONFIG_INIT_STACK_NONE=y > # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set > # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set > # end of Memory initialization > # end of Kernel hardening options > # end of Security options > > CONFIG_CRYPTO=y > > # > # Crypto core or helper > # > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_ALGAPI2=y > CONFIG_CRYPTO_HASH=y > CONFIG_CRYPTO_HASH2=y > # CONFIG_CRYPTO_MANAGER is not set > # CONFIG_CRYPTO_USER is not set > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_CRYPTD is not set > # CONFIG_CRYPTO_AUTHENC is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Public-key cryptography > # > # CONFIG_CRYPTO_RSA is not set > # CONFIG_CRYPTO_DH is not set > # CONFIG_CRYPTO_ECDH is not set > # CONFIG_CRYPTO_ECDSA is not set > # CONFIG_CRYPTO_ECRDSA is not set > # CONFIG_CRYPTO_SM2 is not set > # CONFIG_CRYPTO_CURVE25519 is not set > > # > # Authenticated Encryption with Associated Data > # > # CONFIG_CRYPTO_CCM is not set > # CONFIG_CRYPTO_GCM is not set > # CONFIG_CRYPTO_CHACHA20POLY1305 is not set > # CONFIG_CRYPTO_AEGIS128 is not set > # CONFIG_CRYPTO_SEQIV is not set > # CONFIG_CRYPTO_ECHAINIV is not set > > # > # Block modes > # > # CONFIG_CRYPTO_CBC is not set > # CONFIG_CRYPTO_CFB is not set > # CONFIG_CRYPTO_CTR is not set > # CONFIG_CRYPTO_CTS is not set > # CONFIG_CRYPTO_ECB is not set > # CONFIG_CRYPTO_LRW is not set > # CONFIG_CRYPTO_OFB is not set > # CONFIG_CRYPTO_PCBC is not set > # CONFIG_CRYPTO_XTS is not set > # CONFIG_CRYPTO_KEYWRAP is not set > # CONFIG_CRYPTO_ADIANTUM is not set > # CONFIG_CRYPTO_ESSIV is not set > > # > # Hash modes > # > # CONFIG_CRYPTO_CMAC is not set > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_XCBC is not set > # CONFIG_CRYPTO_VMAC is not set > > # > # Digest > # > CONFIG_CRYPTO_CRC32C=y > # CONFIG_CRYPTO_CRC32 is not set > # CONFIG_CRYPTO_XXHASH is not set > # CONFIG_CRYPTO_BLAKE2B is not set > # CONFIG_CRYPTO_BLAKE2S is not set > # CONFIG_CRYPTO_CRCT10DIF is not set > # CONFIG_CRYPTO_GHASH is not set > # CONFIG_CRYPTO_POLY1305 is not set > # CONFIG_CRYPTO_MD4 is not set > # CONFIG_CRYPTO_MD5 is not set > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_RMD160 is not set > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_SHA3 is not set > # CONFIG_CRYPTO_SM3 is not set > # CONFIG_CRYPTO_STREEBOG is not set > # CONFIG_CRYPTO_WP512 is not set > > # > # Ciphers > # > # CONFIG_CRYPTO_AES is not set > # CONFIG_CRYPTO_AES_TI is not set > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_CAMELLIA is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_DES is not set > # CONFIG_CRYPTO_FCRYPT is not set > # CONFIG_CRYPTO_CHACHA20 is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_SM4 is not set > # CONFIG_CRYPTO_TWOFISH is not set > > # > # Compression > # > # CONFIG_CRYPTO_DEFLATE is not set > # CONFIG_CRYPTO_LZO is not set > # CONFIG_CRYPTO_842 is not set > # CONFIG_CRYPTO_LZ4 is not set > # CONFIG_CRYPTO_LZ4HC is not set > # CONFIG_CRYPTO_ZSTD is not set > > # > # Random Number Generation > # > # CONFIG_CRYPTO_ANSI_CPRNG is not set > # CONFIG_CRYPTO_DRBG_MENU is not set > # CONFIG_CRYPTO_JITTERENTROPY is not set > # CONFIG_CRYPTO_USER_API_HASH is not set > # CONFIG_CRYPTO_USER_API_SKCIPHER is not set > # CONFIG_CRYPTO_USER_API_RNG is not set > # CONFIG_CRYPTO_USER_API_AEAD is not set > > # > # Crypto library routines > # > # CONFIG_CRYPTO_LIB_BLAKE2S is not set > # CONFIG_CRYPTO_LIB_CHACHA is not set > # CONFIG_CRYPTO_LIB_CURVE25519 is not set > CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 > # CONFIG_CRYPTO_LIB_POLY1305 is not set > # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set > # CONFIG_CRYPTO_HW is not set > > # > # Certificates for signature checking > # > # end of Certificates for signature checking > > CONFIG_BINARY_PRINTF=y > > # > # Library routines > # > # CONFIG_PACKING is not set > CONFIG_BITREVERSE=y > CONFIG_GENERIC_STRNCPY_FROM_USER=y > CONFIG_GENERIC_NET_UTILS=y > # CONFIG_CORDIC is not set > # CONFIG_PRIME_NUMBERS is not set > CONFIG_GENERIC_PCI_IOMAP=y > # CONFIG_CRC_CCITT is not set > CONFIG_CRC16=y > # CONFIG_CRC_T10DIF is not set > # CONFIG_CRC_ITU_T is not set > CONFIG_CRC32=y > # CONFIG_CRC32_SELFTEST is not set > CONFIG_CRC32_SLICEBY8=y > # CONFIG_CRC32_SLICEBY4 is not set > # CONFIG_CRC32_SARWATE is not set > # CONFIG_CRC32_BIT is not set > # CONFIG_CRC64 is not set > # CONFIG_CRC4 is not set > # CONFIG_CRC7 is not set > # CONFIG_LIBCRC32C is not set > # CONFIG_CRC8 is not set > # CONFIG_RANDOM32_SELFTEST is not set > # CONFIG_XZ_DEC is not set > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT_MAP=y > CONFIG_HAS_DMA=y > CONFIG_DMA_OPS=y > CONFIG_NEED_SG_DMA_LENGTH=y > CONFIG_NEED_DMA_MAP_STATE=y > CONFIG_ARCH_DMA_ADDR_T_64BIT=y > # CONFIG_DMA_API_DEBUG is not set > CONFIG_DQL=y > CONFIG_NLATTR=y > # CONFIG_IRQ_POLL is not set > CONFIG_FONT_SUPPORT=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > CONFIG_SG_POOL=y > CONFIG_ARCH_NO_SG_CHAIN=y > CONFIG_SBITMAP=y > # CONFIG_STRING_SELFTEST is not set > # end of Library routines > > CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y > > # > # Kernel hacking > # > > # > # printk and dmesg options > # > CONFIG_PRINTK_TIME=y > # CONFIG_PRINTK_CALLER is not set > CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 > CONFIG_CONSOLE_LOGLEVEL_QUIET=4 > CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 > # CONFIG_BOOT_PRINTK_DELAY is not set > # CONFIG_DYNAMIC_DEBUG is not set > # CONFIG_DYNAMIC_DEBUG_CORE is not set > CONFIG_SYMBOLIC_ERRNAME=y > CONFIG_DEBUG_BUGVERBOSE=y > # end of printk and dmesg options > > # > # Compile-time checks and compiler options > # > # CONFIG_DEBUG_INFO is not set > CONFIG_FRAME_WARN=1024 > # CONFIG_STRIP_ASM_SYMS is not set > # CONFIG_READABLE_ASM is not set > # CONFIG_HEADERS_INSTALL is not set > # CONFIG_DEBUG_SECTION_MISMATCH is not set > CONFIG_SECTION_MISMATCH_WARN_ONLY=y > CONFIG_ARCH_WANT_FRAME_POINTERS=y > # CONFIG_FRAME_POINTER is not set > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > # end of Compile-time checks and compiler options > > # > # Generic Kernel Debugging Instruments > # > CONFIG_MAGIC_SYSRQ=y > CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0xffff > CONFIG_MAGIC_SYSRQ_SERIAL=y > CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="s" > # CONFIG_DEBUG_FS is not set > CONFIG_HAVE_ARCH_KGDB=y > # CONFIG_KGDB is not set > CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y > # CONFIG_UBSAN is not set > # end of Generic Kernel Debugging Instruments > > CONFIG_DEBUG_KERNEL=y > CONFIG_DEBUG_MISC=y > > # > # Memory Debugging > # > # CONFIG_PAGE_EXTENSION is not set > # CONFIG_DEBUG_PAGEALLOC is not set > # CONFIG_PAGE_OWNER is not set > # CONFIG_PAGE_POISONING is not set > # CONFIG_DEBUG_RODATA_TEST is not set > # CONFIG_DEBUG_OBJECTS is not set > # CONFIG_SLUB_DEBUG_ON is not set > # CONFIG_SLUB_STATS is not set > # CONFIG_DEBUG_STACK_USAGE is not set > # CONFIG_SCHED_STACK_END_CHECK is not set > # CONFIG_DEBUG_VM is not set > CONFIG_DEBUG_MEMORY_INIT=y > CONFIG_HAVE_DEBUG_STACKOVERFLOW=y > # CONFIG_DEBUG_STACKOVERFLOW is not set > CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y > # end of Memory Debugging > > # CONFIG_DEBUG_SHIRQ is not set > > # > # Debug Oops, Lockups and Hangs > # > # CONFIG_PANIC_ON_OOPS is not set > CONFIG_PANIC_ON_OOPS_VALUE=0 > CONFIG_PANIC_TIMEOUT=0 > CONFIG_LOCKUP_DETECTOR=y > CONFIG_SOFTLOCKUP_DETECTOR=y > # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set > CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 > CONFIG_DETECT_HUNG_TASK=y > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set > CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 > CONFIG_WQ_WATCHDOG=y > # CONFIG_TEST_LOCKUP is not set > # end of Debug Oops, Lockups and Hangs > > # > # Scheduler Debugging > # > # CONFIG_SCHED_DEBUG is not set > # CONFIG_SCHEDSTATS is not set > # end of Scheduler Debugging > > # CONFIG_DEBUG_TIMEKEEPING is not set > > # > # Lock Debugging (spinlocks, mutexes, etc...) > # > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_MUTEXES is not set > # CONFIG_DEBUG_RWSEMS is not set > # CONFIG_DEBUG_ATOMIC_SLEEP is not set > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > # CONFIG_LOCK_TORTURE_TEST is not set > # CONFIG_WW_MUTEX_SELFTEST is not set > # CONFIG_SCF_TORTURE_TEST is not set > # CONFIG_CSD_LOCK_WAIT_DEBUG is not set > # end of Lock Debugging (spinlocks, mutexes, etc...) > > # CONFIG_DEBUG_IRQFLAGS is not set > # CONFIG_STACKTRACE is not set > # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set > # CONFIG_DEBUG_KOBJECT is not set > > # > # Debug kernel data structures > # > # CONFIG_DEBUG_LIST is not set > # CONFIG_DEBUG_PLIST is not set > # CONFIG_DEBUG_SG is not set > # CONFIG_DEBUG_NOTIFIERS is not set > # CONFIG_BUG_ON_DATA_CORRUPTION is not set > # end of Debug kernel data structures > > # CONFIG_DEBUG_CREDENTIALS is not set > > # > # RCU Debugging > # > # CONFIG_RCU_SCALE_TEST is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_RCU_REF_SCALE_TEST is not set > # CONFIG_RCU_TRACE is not set > # CONFIG_RCU_EQS_DEBUG is not set > # end of RCU Debugging > > # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set > CONFIG_HAVE_FUNCTION_TRACER=y > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y > CONFIG_HAVE_DYNAMIC_FTRACE=y > CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > CONFIG_TRACING_SUPPORT=y > # CONFIG_FTRACE is not set > # CONFIG_SAMPLES is not set > # CONFIG_STRICT_DEVMEM is not set > > # > # parisc Debugging > # > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > # end of parisc Debugging > > # > # Kernel Testing and Coverage > # > # CONFIG_KUNIT is not set > # CONFIG_NOTIFIER_ERROR_INJECTION is not set > # CONFIG_FAULT_INJECTION is not set > CONFIG_CC_HAS_SANCOV_TRACE_PC=y > # CONFIG_RUNTIME_TESTING_MENU is not set > # end of Kernel Testing and Coverage > # end of Kernel hacking >
| |