lkml.org 
[lkml]   [2021]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v5 5/7] PCI: Add support for a function level reset based on _RST method
From
Date
Hi Bjorn,

On 6/5/21 3:53 PM, Bjorn Helgaas wrote:
> This is a little sketchy. We shouldn't be doing device config stuff
> after device_add() because that's when it becomes available for
> drivers to bind to the device. If we do anything with the device
> after that point, we may interfere with a driver.
>
> I think the problem is that we don't call acpi_bind_one() until
> device_add(). There's some hackery in pci-acpi.c to deal with a
> similar problem for something else -- see acpi_pci_bridge_d3().
>
> I don't know how to fix this yet. Here's the call graph that I think
> is relevant:
I've refactored pci_dev_acpi_reset() to avoid dependency on acpi_bind_one().
It can be called any time after creating pci_dev object. The code logic is
not exactly same as acpi_pci_bridge_d3() but similar flow. No need to set
ACPI_COMPANION since it would be updated eventually after probing the
reset methods.

Please review the below code and provide suggestions for the next step.

Updated patch:

[PATCH v5 5/7] PCI: Add support for ACPI _RST reset method

The _RST is a standard method specified in the ACPI specification. It
provides a function level reset when it is described in the acpi_device
context associated with PCI-device.

Implement a new reset function pci_dev_acpi_reset() for probing RST
method and execute if it is defined in the firmware. The ACPI binding
information is available only after calling device_add(). Since the
ACPI_COMPANION was not done before calling pci_init_reset_methods(),
use acpi_pci_find_companion() to know the ACPI binding.

The default priority of the ACPI reset is set to below device-specific
and above hardware resets.

Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
---
 drivers/pci/pci-acpi.c | 30 ++++++++++++++++++++++++++++++
 drivers/pci/pci.c      |  1 +
 drivers/pci/pci.h      |  6 ++++++
 include/linux/pci.h    |  2 +-
 4 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 36bc23e217592..c344c33f5c910 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -934,6 +934,36 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)

 static struct acpi_device *acpi_pci_find_companion(struct device *dev);

+/**
+ * pci_dev_acpi_reset - do a function level reset using _RST method
+ * @dev: device to reset
+ * @probe: check if _RST method is included in the acpi_device context.
+ */
+int pci_dev_acpi_reset(struct pci_dev *dev, int probe)
+{
+       acpi_handle handle = ACPI_HANDLE(&dev->dev);
+
+       /* Find out ACPI_HANDLE if not available in the device context */
+       if (!handle) {
+               handle = acpi_device_handle(acpi_pci_find_companion(&dev->dev));
+               if (!handle)
+                       return -ENOTTY;
+       }
+
+       if (!acpi_has_method(handle, "_RST"))
+               return -ENOTTY;
+
+       if (probe)
+               return 0;
+
+       if (ACPI_FAILURE(acpi_evaluate_object(handle, "_RST", NULL, NULL))) {
+               pci_warn(dev, "ACPI _RST failed\n");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
 static bool acpi_pci_bridge_d3(struct pci_dev *dev)
 {
        const struct fwnode_handle *fwnode;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bbed852d977f1..5726d120b70a2 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5122,6 +5122,7 @@ static void pci_dev_restore(struct pci_dev *dev)
  */
 const struct pci_reset_fn_method pci_reset_fn_methods[] = {
        { &pci_dev_specific_reset, .name = "device_specific" },
+       { &pci_dev_acpi_reset, .name = "acpi" },
        { &pcie_reset_flr, .name = "flr" },
        { &pci_af_flr, .name = "af_flr" },
        { &pci_pm_reset, .name = "pm" },
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 13ec6bd6f4f76..f3974ed1a99c2 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -703,7 +703,13 @@ static inline int pci_aer_raw_clear_status(struct pci_dev *dev) { return -EINVAL
 #ifdef CONFIG_ACPI
 int pci_acpi_program_hp_params(struct pci_dev *dev);
 extern const struct attribute_group pci_dev_acpi_attr_group;
+int pci_dev_acpi_reset(struct pci_dev *dev, int probe);
 #else
+static inline int pci_dev_acpi_reset(struct pci_dev *dev, int probe)
+{
+       return -ENOTTY;
+}
+
 static inline int pci_acpi_program_hp_params(struct pci_dev *dev)
 {
        return -ENODEV;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6e9bc4f9cdab4..a7f063da2fe5f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -49,7 +49,7 @@
                               PCI_STATUS_SIG_TARGET_ABORT | \
                               PCI_STATUS_PARITY)

-#define PCI_RESET_METHODS_NUM 5
+#define PCI_RESET_METHODS_NUM 6



\
 
 \ /
  Last update: 2021-06-06 07:01    [W:0.495 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site