lkml.org 
[lkml]   [2021]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/7] PCI: Add support for a function level reset based on _RST method
[+cc Rafael in case you have any ideas about acpi_bind_one() below]

Mention ACPI in the subject, e.g.,

PCI: Add support for ACPI _RST reset method

On Sun, May 30, 2021 at 12:55:25AM +0530, Amey Narkhede wrote:
> From: Shanker Donthineni <sdonthineni@nvidia.com>
>
> The _RST is a standard method specified in the ACPI specification. It
> provides a function level reset when it is described in the acpi_device
> context associated with PCI-device.
>
> Implement a new reset function pci_dev_acpi_reset() for probing RST
> method and execute if it is defined in the firmware. The ACPI binding
> information is available only after calling device_add(). To consider
> _RST method, move pci_init_reset_methods() to end of pci_device_add()
> and craete two sysfs entries reset & reset_methond from
> pci_create_sysfs_dev_files()

s/craete/create/
s/reset_methond/reset_method/

> The default priority of the acpi reset is set to below device-specific
> and above hardware resets.

s/acpi/ACPI/

> Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
> Reviewed-by: Sinan Kaya <okaya@kernel.org>
> ---
> drivers/pci/pci-sysfs.c | 23 ++++++++++++++++++++---
> drivers/pci/pci.c | 30 ++++++++++++++++++++++++++++++
> drivers/pci/probe.c | 2 +-
> include/linux/pci.h | 2 +-
> 4 files changed, 52 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 04b3d6565..b332d7923 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -1482,12 +1482,30 @@ static const struct attribute_group pci_dev_reset_attr_group = {
> .is_visible = pci_dev_reset_attr_is_visible,
> };
>
> +const struct attribute_group *pci_dev_reset_groups[] = {
> + &pci_dev_reset_attr_group,
> + &pci_dev_reset_method_attr_group,
> + NULL,
> +};

These should be static sysfs attributes if possible, e.g., see
e1d3f3268b0e ("PCI/sysfs: Convert "config" to static attribute").
pci_create_sysfs_dev_files() will soon be removed completely.

> int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
> {
> + int retval;
> +
> if (!sysfs_initialized)
> return -EACCES;
>
> - return pci_create_resource_files(pdev);
> + retval = pci_create_resource_files(pdev);
> + if (retval)
> + return retval;
> +
> + retval = device_add_groups(&pdev->dev, pci_dev_reset_groups);
> + if (retval) {
> + pci_remove_resource_files(pdev);
> + return retval;
> + }
> +
> + return 0;
> }
>
> /**
> @@ -1501,6 +1519,7 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
> if (!sysfs_initialized)
> return;
>
> + device_remove_groups(&pdev->dev, pci_dev_reset_groups);
> pci_remove_resource_files(pdev);
> }
>
> @@ -1594,8 +1613,6 @@ const struct attribute_group *pci_dev_groups[] = {
> &pci_dev_group,
> &pci_dev_config_attr_group,
> &pci_dev_rom_attr_group,
> - &pci_dev_reset_attr_group,
> - &pci_dev_reset_method_attr_group,
> &pci_dev_vpd_attr_group,
> #ifdef CONFIG_DMI
> &pci_dev_smbios_attr_group,
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index bbed852d9..4a7019d0b 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5115,6 +5115,35 @@ static void pci_dev_restore(struct pci_dev *dev)
> err_handler->reset_done(dev);
> }
>
> +/**
> + * pci_dev_acpi_reset - do a function level reset using _RST method
> + * @dev: device to reset
> + * @probe: check if _RST method is included in the acpi_device context.
> + */
> +static int pci_dev_acpi_reset(struct pci_dev *dev, int probe)
> +{
> +#ifdef CONFIG_ACPI
> + acpi_handle handle = ACPI_HANDLE(&dev->dev);
> +
> + /* Return -ENOTTY if _RST method is not included in the dev context */
> + if (!handle || !acpi_has_method(handle, "_RST"))
> + return -ENOTTY;
> +
> + /* Return 0 for probe phase indicating that we can reset this device */
> + if (probe)
> + return 0;
> +
> + /* Invoke _RST() method to perform a function level reset */

Superfluous comment. Actually all the single-line comments here are
superfluous.

> + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_RST", NULL, NULL))) {
> + pci_warn(dev, "Failed to reset the device\n");

The message should mention the type of reset, e.g., "ACPI _RST failed ..."

> + return -EINVAL;
> + }
> + return 0;
> +#else
> + return -ENOTTY;
> +#endif
> +}
> +
> /*
> * The ordering for functions in pci_reset_fn_methods
> * is required for reset_methods byte array defined
> @@ -5122,6 +5151,7 @@ static void pci_dev_restore(struct pci_dev *dev)
> */
> const struct pci_reset_fn_method pci_reset_fn_methods[] = {
> { &pci_dev_specific_reset, .name = "device_specific" },
> + { &pci_dev_acpi_reset, .name = "acpi" },
> { &pcie_reset_flr, .name = "flr" },
> { &pci_af_flr, .name = "af_flr" },
> { &pci_pm_reset, .name = "pm" },
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 90fd4f61f..eeab791a0 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -2404,7 +2404,6 @@ static void pci_init_capabilities(struct pci_dev *dev)
> pci_rcec_init(dev); /* Root Complex Event Collector */
>
> pcie_report_downtraining(dev);
> - pci_init_reset_methods(dev);
> }
>
> /*
> @@ -2495,6 +2494,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> dev->match_driver = false;
> ret = device_add(&dev->dev);
> WARN_ON(ret < 0);
> + pci_init_reset_methods(dev);

This is a little sketchy. We shouldn't be doing device config stuff
after device_add() because that's when it becomes available for
drivers to bind to the device. If we do anything with the device
after that point, we may interfere with a driver.

I think the problem is that we don't call acpi_bind_one() until
device_add(). There's some hackery in pci-acpi.c to deal with a
similar problem for something else -- see acpi_pci_bridge_d3().

I don't know how to fix this yet. Here's the call graph that I think
is relevant:

pci_scan_single_device
pci_scan_device
pci_set_of_node
dev->dev.of_node = of_pci_find_child_device() <-- set OF stuff
pci_device_add
device_add
device_platform_notify
acpi_platform_notify
case KOBJ_ADD:
acpi_device_notify
acpi_bind_one
ACPI_COMPANION_SET() <-- sets ACPI_COMPANION
pci_init_reset_methods
pci_dev_acpi_reset(PCI_RESET_PROBE)
handle = ACPI_HANDLE(&dev->dev) <-- uses ACPI_COMPANION

I think it's kind of a general problem that we currently don't have
access to the ACPI stuff until *after* device_add(). I included
pci_set_of_node() in the graph above because that seems sort of
like an OF analogue of what acpi_bind_one() is doing.

I would really like to do the ACPI_COMPANION setup earlier, maybe
at the same time as pci_set_of_node(). But I don't know enough about
what acpi_bind_one() does -- there's a lot going on in there.

> }
>
> struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 6e9bc4f9c..a7f063da2 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -49,7 +49,7 @@
> PCI_STATUS_SIG_TARGET_ABORT | \
> PCI_STATUS_PARITY)
>
> -#define PCI_RESET_METHODS_NUM 5
> +#define PCI_RESET_METHODS_NUM 6
>
> /*
> * The PCI interface treats multi-function devices as independent
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-06-05 22:54    [W:0.154 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site