Messages in this thread | | | From | Pratyush Yadav <> | Subject | [PATCH v3 0/7] Rx mode support for Cadence DPHY | Date | Fri, 25 Jun 2021 00:11:01 +0530 |
| |
Hi,
This series adds support for Rx mode on Cadence DPHY driver. It has been split off from [0] to facilitate easier merging. I have still kept it as v3 to maintain continuity with the previous patches. This series also includes conversion to YAML binding.
Tested on TI's J721E with OV5640 sensor.
[0] https://patchwork.linuxtv.org/project/linux-media/list/?series=5526&state=%2A&archive=both
Changes in v3: - Use a table to select the band. - Use a table to poll the data lane ready bits. - Multiply the DPHY HS clock rate by 2 to get the bit rate since the clock is DDR. - Add Rob's R-by.
Changes in v2: - Drop reg description. - Add a description for each DPHY clock. - Rename dphy@... to phy@... in example. - Add Laurent's R-by. - Re-order subject prefixes. - Re-order subject prefixes. - Add power-domain to the example. - Add Laurent's R-by. - Re-order subject prefixes.
Paul Kocialkowski (1): phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
Pratyush Yadav (6): phy: cdns-dphy: Prepare for Rx support phy: cdns-dphy: Allow setting mode phy: cdns-dphy: Add Rx support phy: dt-bindings: Convert Cadence DPHY binding to YAML phy: dt-bindings: cdns,dphy: make clocks optional phy: dt-bindings: cdns,dphy: add power-domains property
.../devicetree/bindings/phy/cdns,dphy.txt | 20 - .../devicetree/bindings/phy/cdns,dphy.yaml | 54 +++ drivers/phy/cadence/cdns-dphy.c | 344 ++++++++++++++++-- include/linux/phy/phy-mipi-dphy.h | 13 + 4 files changed, 375 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
-- 2.30.0
| |