lkml.org 
[lkml]   [2021]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty: n_gsm: modify the doc punctuation "," to "."
Date
From: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>

End punctuation of items 5 and 6 are ".",other lists
should be modify to "."

Signed-off-by: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
---
Documentation/driver-api/serial/n_gsm.rst | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst
index 87dfcd5..154c75e 100644
--- a/Documentation/driver-api/serial/n_gsm.rst
+++ b/Documentation/driver-api/serial/n_gsm.rst
@@ -14,11 +14,11 @@ How to use it
-------------
1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
its serial port. Depending on the modem used, you can pass more or less
- parameters to this command,
+ parameters to this command.
2. switch the serial line to using the n_gsm line discipline by using
- TIOCSETD ioctl,
-3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
-4. obtain base gsmtty number for the used serial port,
+ TIOCSETD ioctl.
+3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl.
+4. obtain base gsmtty number for the used serial port.

Major parts of the initialization program :
(a good starting point is util-linux-ng/sys-utils/ldattach.c)::
--
1.9.1
\
 
 \ /
  Last update: 2021-06-18 04:06    [W:0.038 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site