[lkml]   [2021]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v1 0/4] MHI event ring priority updates
Event ring priorities have remained out of use and are set to 1 by default.
This series brings about an enum entry expanding use of the priority field by
adding high priority tasklet scheduling to the menu.

In some cases, tasklet scheduling delays can be a nuisance. An example would be
ath11k adding a610f3c65d3b ("bus: mhi: Wait for M2 state during system resume")
in response to it. This issue can be potentially avoided if the controller uses
a dedicated event ring for control packets with high priority tasklet scheduling
in place.

There are no functional changes added to the controller (pci_generic or ath11k)
drivers with this series and the only changes there are use of the enum in place
of a harcoded value of "1". In the future, controllers can opt in to have any
event ring scheduled in high priority.

Tested on: X86_64 architecture with SDX65 on Ubuntu 18.04 distribution.

Bhaumik Bhatt (3):
bus: mhi: pci_generic: Use enum entry for event ring priority
ath11k: Use enum entry for event ring priority
bus: mhi: core: Enable support for event ring priorities

Hemant Kumar (1):
bus: mhi: core: Add support for processing priority of event ring

drivers/bus/mhi/core/init.c | 3 +-
drivers/bus/mhi/core/internal.h | 2 +-
drivers/bus/mhi/core/main.c | 19 ++++++++--
drivers/bus/mhi/pci_generic.c | 66 +++++++++++++++++------------------
drivers/net/wireless/ath/ath11k/mhi.c | 4 +--
include/linux/mhi.h | 14 ++++++--
6 files changed, 65 insertions(+), 43 deletions(-)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2021-06-17 23:31    [W:0.086 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site