Messages in this thread | | | Date | Fri, 7 May 2021 13:36:59 -0400 | From | Alan Stern <> | Subject | Re: [PATCH] fsl-usb: add need_oc_pp_cycle flag for 85xx also |
| |
On Fri, May 07, 2021 at 10:23:00AM -0700, Daniel Walker wrote: > From: Gopalakrishnan Santhanam <gsanthan@cisco.com> > > Commit e6604a7fd71f9 ("EHCI: Quirk flag for port power handling on overcurrent.") > activated the quirks handling (flag need_oc_pp_cycle) for Freescale 83xx > based boards. > Activate same for 85xx based boards as well. > > Cc: xe-linux-external@cisco.com > Signed-off-by: Gopalakrishnan Santhanam <gsanthan@cisco.com> > Signed-off-by: Daniel Walker <danielwa@cisco.com> > --- > drivers/usb/host/ehci-fsl.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c > index 6f7bd6641694..c7d74c1a23f5 100644 > --- a/drivers/usb/host/ehci-fsl.c > +++ b/drivers/usb/host/ehci-fsl.c > @@ -387,7 +387,7 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) > /* EHCI registers start at offset 0x100 */ > ehci->caps = hcd->regs + 0x100; > > -#ifdef CONFIG_PPC_83xx > +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx) > /* > * Deal with MPC834X that need port power to be cycled after the power -------------------------^
Shouldn't this comment be changed as well?
Alan Stern
> * fault condition is removed. Otherwise the state machine does not > -- > 2.25.1 >
| |