lkml.org 
[lkml]   [2021]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] fsl-usb: add need_oc_pp_cycle flag for 85xx also
On Thu, May 13, 2021 at 02:02:25PM +0530, Gopalakrishnan Santhanam wrote:
> Commit e6604a7fd71f9 ("EHCI: Quirk flag for port power handling
> on overcurrent.") activated the quirks handling (flag need_oc_pp_cycle)
> for Freescale 83xx based boards.
> Activate same for 85xx based boards as well.
>
> Cc: xe-linux-external@cisco.com
> Signed-off-by: Gopalakrishnan Santhanam <gsanthan@cisco.com>
> Signed-off-by: Daniel Walker <danielwa@cisco.com>
> ---

Acked-by: Alan Stern <stern@rowland.harvard.edu>

> drivers/usb/host/ehci-fsl.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index 6f7bd6641694..385be30baad3 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -387,11 +387,11 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
> /* EHCI registers start at offset 0x100 */
> ehci->caps = hcd->regs + 0x100;
>
> -#ifdef CONFIG_PPC_83xx
> +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx)
> /*
> - * Deal with MPC834X that need port power to be cycled after the power
> - * fault condition is removed. Otherwise the state machine does not
> - * reflect PORTSC[CSC] correctly.
> + * Deal with MPC834X/85XX that need port power to be cycled
> + * after the power fault condition is removed. Otherwise the
> + * state machine does not reflect PORTSC[CSC] correctly.
> */
> ehci->need_oc_pp_cycle = 1;
> #endif
> --
> 2.26.2.Cisco
>

\
 
 \ /
  Last update: 2021-05-13 16:42    [W:0.073 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site