lkml.org 
[lkml]   [2021]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] hwmon: sht4x: Fix sht4x_read_values return value
From
Date
Kernel doc for sht4x_read_values() shows 0 on success, 1 on failure but
the return value on success is actually always positive as it is set to
SHT4X_RESPONSE_LENGTH by a successful call to i2c_master_recv().

Miscellanea:

o Update the kernel doc for sht4x_read_values to 0 for success or -ERRNO
o Remove incorrectly used kernel doc /** header for other _read functions
o Typo fix succesfull->successful
o Reverse a test to unindent a block and use goto unlock
o Declare cmd[SHT4X_CMD_LEN] rather than cmd[]

At least for gcc 10.2, object size is reduced a tiny bit.

$ size drivers/hwmon/sht4x.o*
text data bss dec hex filename
1752 404 256 2412 96c drivers/hwmon/sht4x.o.new
1825 404 256 2485 9b5 drivers/hwmon/sht4x.o.old

Signed-off-by: Joe Perches <joe@perches.com>
---

compiled, untested, no hardware

drivers/hwmon/sht4x.c | 95 ++++++++++++++++++++++++---------------------------
1 file changed, 45 insertions(+), 50 deletions(-)

diff --git a/drivers/hwmon/sht4x.c b/drivers/hwmon/sht4x.c
index 1dc51ee2a72ba..09c2a0b064444 100644
--- a/drivers/hwmon/sht4x.c
+++ b/drivers/hwmon/sht4x.c
@@ -67,7 +67,7 @@ struct sht4x_data {
/**
* sht4x_read_values() - read and parse the raw data from the SHT4X
* @sht4x_data: the struct sht4x_data to use for the lock
- * Return: 0 if succesfull, 1 if not
+ * Return: 0 if successful, -ERRNO if not
*/
static int sht4x_read_values(struct sht4x_data *data)
{
@@ -75,51 +75,53 @@ static int sht4x_read_values(struct sht4x_data *data)
u16 t_ticks, rh_ticks;
unsigned long next_update;
struct i2c_client *client = data->client;
- u8 crc, raw_data[SHT4X_RESPONSE_LENGTH],
- cmd[] = {SHT4X_CMD_MEASURE_HPM};
+ u8 crc;
+ u8 cmd[SHT4X_CMD_LEN] = {SHT4X_CMD_MEASURE_HPM};
+ u8 raw_data[SHT4X_RESPONSE_LENGTH];

mutex_lock(&data->lock);
next_update = data->last_updated +
msecs_to_jiffies(data->update_interval);
- if (!data->valid || time_after(jiffies, next_update)) {
- ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
- if (ret < 0)
- goto unlock;
-
- usleep_range(SHT4X_MEAS_DELAY,
- SHT4X_MEAS_DELAY + SHT4X_DELAY_EXTRA);
-
- ret = i2c_master_recv(client, raw_data, SHT4X_RESPONSE_LENGTH);
- if (ret != SHT4X_RESPONSE_LENGTH) {
- if (ret >= 0)
- ret = -ENODATA;
-
- goto unlock;
- }
-
- t_ticks = raw_data[0] << 8 | raw_data[1];
- rh_ticks = raw_data[3] << 8 | raw_data[4];
-
- crc = crc8(sht4x_crc8_table, &raw_data[0], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
- if (crc != raw_data[2]) {
- dev_err(&client->dev, "data integrity check failed\n");
- ret = -EIO;
- goto unlock;
- }
-
- crc = crc8(sht4x_crc8_table, &raw_data[3], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
- if (crc != raw_data[5]) {
- dev_err(&client->dev, "data integrity check failed\n");
- ret = -EIO;
- goto unlock;
- }
-
- data->temperature = ((21875 * (int32_t)t_ticks) >> 13) - 45000;
- data->humidity = ((15625 * (int32_t)rh_ticks) >> 13) - 6000;
- data->last_updated = jiffies;
- data->valid = true;
+
+ if (data->valid && time_before_eq(jiffies, next_update))
+ goto unlock;
+
+ ret = i2c_master_send(client, cmd, SHT4X_CMD_LEN);
+ if (ret < 0)
+ goto unlock;
+
+ usleep_range(SHT4X_MEAS_DELAY, SHT4X_MEAS_DELAY + SHT4X_DELAY_EXTRA);
+
+ ret = i2c_master_recv(client, raw_data, SHT4X_RESPONSE_LENGTH);
+ if (ret != SHT4X_RESPONSE_LENGTH) {
+ if (ret >= 0)
+ ret = -ENODATA;
+ goto unlock;
+ }
+
+ t_ticks = raw_data[0] << 8 | raw_data[1];
+ rh_ticks = raw_data[3] << 8 | raw_data[4];
+
+ crc = crc8(sht4x_crc8_table, &raw_data[0], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+ if (crc != raw_data[2]) {
+ dev_err(&client->dev, "data integrity check failed\n");
+ ret = -EIO;
+ goto unlock;
}

+ crc = crc8(sht4x_crc8_table, &raw_data[3], SHT4X_WORD_LEN, CRC8_INIT_VALUE);
+ if (crc != raw_data[5]) {
+ dev_err(&client->dev, "data integrity check failed\n");
+ ret = -EIO;
+ goto unlock;
+ }
+
+ data->temperature = ((21875 * (int32_t)t_ticks) >> 13) - 45000;
+ data->humidity = ((15625 * (int32_t)rh_ticks) >> 13) - 6000;
+ data->last_updated = jiffies;
+ data->valid = true;
+ ret = 0;
+
unlock:
mutex_unlock(&data->lock);
return ret;
@@ -132,19 +134,14 @@ static ssize_t sht4x_interval_write(struct sht4x_data *data, long val)
return 0;
}

-/**
- * sht4x_interval_read() - read the minimum poll interval
- * in milliseconds
- */
+/* sht4x_interval_read() - read the minimum poll interval in milliseconds */
static size_t sht4x_interval_read(struct sht4x_data *data, long *val)
{
*val = data->update_interval;
return 0;
}

-/**
- * sht4x_temperature1_read() - read the temperature in millidegrees
- */
+/* sht4x_temperature1_read() - read the temperature in millidegrees */
static int sht4x_temperature1_read(struct sht4x_data *data, long *val)
{
int ret;
@@ -158,9 +155,7 @@ static int sht4x_temperature1_read(struct sht4x_data *data, long *val)
return 0;
}

-/**
- * sht4x_humidity1_read() - read a relative humidity in millipercent
- */
+/* sht4x_humidity1_read() - read a relative humidity in millipercent */
static int sht4x_humidity1_read(struct sht4x_data *data, long *val)
{
int ret;
\
 
 \ /
  Last update: 2021-05-29 11:14    [W:0.074 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site