lkml.org 
[lkml]   [2021]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] arm64: dts: qcom: Add PMI8996 DTSI file
Date
PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances:

- Boards equipped with PMI8996 now have to include pmic-id (which wasn't the case before)
- Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB is introduced)
- Different inhibit-derating-ua value (will be addressed after BCL is introduced)
- Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED is introduced)

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/pmi8996.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pmi8996.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
new file mode 100644
index 000000000000..31b47209e261
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+ /*
+ * PMI8996 is a slight modification of PMI8994 with
+ * some notable changes, like being the first PMIC
+ * whose the bootloader has to check to continue booting
+ * and a change to a LABIBB parameter.
+ */
+
+/ {
+ qcom,pmic-id = <0x20009 0x10013 0 0>;
+};
--
2.31.1
\
 
 \ /
  Last update: 2021-05-25 22:04    [W:0.189 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site