lkml.org 
[lkml]   [2021]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] riscv: fix memmove and optimise memcpy when misalign
From
On Sat, 22 May 2021 15:22:56 PDT (-0700), gary@garyguo.net wrote:
> On Tue, 16 Feb 2021 22:55:51 +0000
> Gary Guo <gary@garyguo.net> wrote:
>
>> 04091d6 introduces an assembly version of memmove but
>> it does take misalignment into account (it checks if
>> length is a multiple of machine word size but pointers
>> need also be aligned). As a result it will generate
>> misaligned load/store for the majority of cases and causes
>> significant performance regression on hardware that traps
>> misaligned load/store and emulate them using firmware.
>>
>> The current behaviour of memcpy is that it checks if both
>> src and dest pointers are co-aligned (aka congruent
>> modular SZ_REG). If aligned, it will copy data word-by-word
>> after first aligning pointers to word boundary. If src
>> and dst are not co-aligned, however, byte-wise copy will
>> be performed.
>>
>> This patch fixes the memmove and optimises memcpy for
>> misaligned cases. It will first align destination pointer
>> to word-boundary regardless whether src and dest are
>> co-aligned or not. If they indeed are, then wordwise copy
>> is performed. If they are not co-aligned, then it will
>> load two adjacent words from src and use shifts to assemble
>> a full machine word. Some additional assembly level
>> micro-optimisation is also performed to ensure more
>> instructions can be compressed (e.g. prefer a0 to t6).
>>
>> In my testing this speeds up memcpy 4~5x when src and dest
>> are not co-aligned (which is quite common in networking),
>> and speeds up memmove 1000+x by avoiding trapping to firmware.
>>
>> Signed-off-by: Gary Guo <gary@garyguo.net>
>> ---
>> arch/riscv/lib/memcpy.S | 223
>> ++++++++++++++++++++++++--------------- arch/riscv/lib/memmove.S |
>> 176 ++++++++++++++++++++---------- 2 files changed, 257
>> insertions(+), 142 deletions(-)
>>
>> diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
>> index 51ab716253fa..00672c19ad9b 100644
>> --- a/arch/riscv/lib/memcpy.S
>> +++ b/arch/riscv/lib/memcpy.S
>> @@ -9,100 +9,151 @@
>> /* void *memcpy(void *, const void *, size_t) */
>> ENTRY(__memcpy)
>> WEAK(memcpy)
>> - move t6, a0 /* Preserve return value */
>> + /* Save for return value */
>> + mv t6, a0
>>
>> - /* Defer to byte-oriented copy for small sizes */
>> - sltiu a3, a2, 128
>> - bnez a3, 4f
>> - /* Use word-oriented copy only if low-order bits match */
>> - andi a3, t6, SZREG-1
>> - andi a4, a1, SZREG-1
>> - bne a3, a4, 4f
>> + /*
>> + * Register allocation for code below:
>> + * a0 - start of uncopied dst
>> + * a1 - start of uncopied src
>> + * t0 - end of uncopied dst
>> + */
>> + add t0, a0, a2
>>
>> - beqz a3, 2f /* Skip if already aligned */
>> /*
>> - * Round to nearest double word-aligned address
>> - * greater than or equal to start address
>> + * Use bytewise copy if too small.
>> + *
>> + * This threshold must be at least 2*SZREG to ensure at
>> least one
>> + * wordwise copy is performed. It is chosen to be 16 because
>> it will
>> + * save at least 7 iterations of bytewise copy, which pays
>> off the
>> + * fixed overhead.
>> */
>> - andi a3, a1, ~(SZREG-1)
>> - addi a3, a3, SZREG
>> - /* Handle initial misalignment */
>> - sub a4, a3, a1
>> + li a3, 16
>> + bltu a2, a3, .Lbyte_copy_tail
>> +
>> + /*
>> + * Bytewise copy first to align a0 to word boundary.
>> + */
>> + addi a2, a0, SZREG-1
>> + andi a2, a2, ~(SZREG-1)
>> + beq a0, a2, 2f
>> 1:
>> - lb a5, 0(a1)
>> - addi a1, a1, 1
>> - sb a5, 0(t6)
>> - addi t6, t6, 1
>> - bltu a1, a3, 1b
>> - sub a2, a2, a4 /* Update count */
>> + lb a5, 0(a1)
>> + addi a1, a1, 1
>> + sb a5, 0(a0)
>> + addi a0, a0, 1
>> + bne a0, a2, 1b
>> +2:
>> +
>> + /*
>> + * Now a0 is word-aligned. If a1 is also word aligned, we
>> could perform
>> + * aligned word-wise copy. Otherwise we need to perform
>> misaligned
>> + * word-wise copy.
>> + */
>> + andi a3, a1, SZREG-1
>> + bnez a3, .Lmisaligned_word_copy
>>
>> + /* Unrolled wordwise copy */
>> + addi t0, t0, -(16*SZREG-1)
>> + bgeu a0, t0, 2f
>> +1:
>> + REG_L a2, 0(a1)
>> + REG_L a3, SZREG(a1)
>> + REG_L a4, 2*SZREG(a1)
>> + REG_L a5, 3*SZREG(a1)
>> + REG_L a6, 4*SZREG(a1)
>> + REG_L a7, 5*SZREG(a1)
>> + REG_L t1, 6*SZREG(a1)
>> + REG_L t2, 7*SZREG(a1)
>> + REG_L t3, 8*SZREG(a1)
>> + REG_L t4, 9*SZREG(a1)
>> + REG_L t5, 10*SZREG(a1)
>> + REG_S a2, 0(a0)
>> + REG_S a3, SZREG(a0)
>> + REG_S a4, 2*SZREG(a0)
>> + REG_S a5, 3*SZREG(a0)
>> + REG_S a6, 4*SZREG(a0)
>> + REG_S a7, 5*SZREG(a0)
>> + REG_S t1, 6*SZREG(a0)
>> + REG_S t2, 7*SZREG(a0)
>> + REG_S t3, 8*SZREG(a0)
>> + REG_S t4, 9*SZREG(a0)
>> + REG_S t5, 10*SZREG(a0)
>> + REG_L a2, 11*SZREG(a1)
>> + REG_L a3, 12*SZREG(a1)
>> + REG_L a4, 13*SZREG(a1)
>> + REG_L a5, 14*SZREG(a1)
>> + REG_L a6, 15*SZREG(a1)
>> + addi a1, a1, 16*SZREG
>> + REG_S a2, 11*SZREG(a0)
>> + REG_S a3, 12*SZREG(a0)
>> + REG_S a4, 13*SZREG(a0)
>> + REG_S a5, 14*SZREG(a0)
>> + REG_S a6, 15*SZREG(a0)
>> + addi a0, a0, 16*SZREG
>> + bltu a0, t0, 1b
>> 2:
>> - andi a4, a2, ~((16*SZREG)-1)
>> - beqz a4, 4f
>> - add a3, a1, a4
>> -3:
>> - REG_L a4, 0(a1)
>> - REG_L a5, SZREG(a1)
>> - REG_L a6, 2*SZREG(a1)
>> - REG_L a7, 3*SZREG(a1)
>> - REG_L t0, 4*SZREG(a1)
>> - REG_L t1, 5*SZREG(a1)
>> - REG_L t2, 6*SZREG(a1)
>> - REG_L t3, 7*SZREG(a1)
>> - REG_L t4, 8*SZREG(a1)
>> - REG_L t5, 9*SZREG(a1)
>> - REG_S a4, 0(t6)
>> - REG_S a5, SZREG(t6)
>> - REG_S a6, 2*SZREG(t6)
>> - REG_S a7, 3*SZREG(t6)
>> - REG_S t0, 4*SZREG(t6)
>> - REG_S t1, 5*SZREG(t6)
>> - REG_S t2, 6*SZREG(t6)
>> - REG_S t3, 7*SZREG(t6)
>> - REG_S t4, 8*SZREG(t6)
>> - REG_S t5, 9*SZREG(t6)
>> - REG_L a4, 10*SZREG(a1)
>> - REG_L a5, 11*SZREG(a1)
>> - REG_L a6, 12*SZREG(a1)
>> - REG_L a7, 13*SZREG(a1)
>> - REG_L t0, 14*SZREG(a1)
>> - REG_L t1, 15*SZREG(a1)
>> - addi a1, a1, 16*SZREG
>> - REG_S a4, 10*SZREG(t6)
>> - REG_S a5, 11*SZREG(t6)
>> - REG_S a6, 12*SZREG(t6)
>> - REG_S a7, 13*SZREG(t6)
>> - REG_S t0, 14*SZREG(t6)
>> - REG_S t1, 15*SZREG(t6)
>> - addi t6, t6, 16*SZREG
>> - bltu a1, a3, 3b
>> - andi a2, a2, (16*SZREG)-1 /* Update count */
>> -
>> -4:
>> - /* Handle trailing misalignment */
>> - beqz a2, 6f
>> - add a3, a1, a2
>> -
>> - /* Use word-oriented copy if co-aligned to word boundary */
>> - or a5, a1, t6
>> - or a5, a5, a3
>> - andi a5, a5, 3
>> - bnez a5, 5f
>> -7:
>> - lw a4, 0(a1)
>> - addi a1, a1, 4
>> - sw a4, 0(t6)
>> - addi t6, t6, 4
>> - bltu a1, a3, 7b
>> + /* Post-loop increment by 16*SZREG-1 and pre-loop decrement
>> by SZREG-1 */
>> + addi t0, t0, 15*SZREG
>>
>> - ret
>> + /* Wordwise copy */
>> + bgeu a0, t0, 2f
>> +1:
>> + REG_L a5, 0(a1)
>> + addi a1, a1, SZREG
>> + REG_S a5, 0(a0)
>> + addi a0, a0, SZREG
>> + bltu a0, t0, 1b
>> +2:
>> + addi t0, t0, SZREG-1
>>
>> -5:
>> - lb a4, 0(a1)
>> - addi a1, a1, 1
>> - sb a4, 0(t6)
>> - addi t6, t6, 1
>> - bltu a1, a3, 5b
>> -6:
>> +.Lbyte_copy_tail:
>> + /*
>> + * Bytewise copy anything left.
>> + */
>> + beq a0, t0, 2f
>> +1:
>> + lb a5, 0(a1)
>> + addi a1, a1, 1
>> + sb a5, 0(a0)
>> + addi a0, a0, 1
>> + bne a0, t0, 1b
>> +2:
>> +
>> + mv a0, t6
>> ret
>> +
>> +.Lmisaligned_word_copy:
>> + /*
>> + * Misaligned word-wise copy.
>> + * For misaligned copy we still perform word-wise copy, but
>> we need to
>> + * use the value fetched from the previous iteration and do
>> some shifts.
>> + * This is safe because we wouldn't access more words than
>> necessary.
>> + */
>> +
>> + /* Calculate shifts */
>> + slli t3, a3, 3
>> + sub t4, x0, t3 /* negate is okay as shift will only
>> look at LSBs */ +
>> + /* Load the initial value and align a1 */
>> + andi a1, a1, ~(SZREG-1)
>> + REG_L a5, 0(a1)
>> +
>> + addi t0, t0, -(SZREG-1)
>> + /* At least one iteration will be executed here, no check */
>> +1:
>> + srl a4, a5, t3
>> + REG_L a5, SZREG(a1)
>> + addi a1, a1, SZREG
>> + sll a2, a5, t4
>> + or a2, a2, a4
>> + REG_S a2, 0(a0)
>> + addi a0, a0, SZREG
>> + bltu a0, t0, 1b
>> +
>> + /* Update pointers to correct value */
>> + addi t0, t0, SZREG-1
>> + add a1, a1, a3
>> +
>> + j .Lbyte_copy_tail
>> END(__memcpy)
>> diff --git a/arch/riscv/lib/memmove.S b/arch/riscv/lib/memmove.S
>> index 07d1d2152ba5..fbe6701dbe4a 100644
>> --- a/arch/riscv/lib/memmove.S
>> +++ b/arch/riscv/lib/memmove.S
>> @@ -5,60 +5,124 @@
>>
>> ENTRY(__memmove)
>> WEAK(memmove)
>> - move t0, a0
>> - move t1, a1
>> -
>> - beq a0, a1, exit_memcpy
>> - beqz a2, exit_memcpy
>> - srli t2, a2, 0x2
>> -
>> - slt t3, a0, a1
>> - beqz t3, do_reverse
>> -
>> - andi a2, a2, 0x3
>> - li t4, 1
>> - beqz t2, byte_copy
>> -
>> -word_copy:
>> - lw t3, 0(a1)
>> - addi t2, t2, -1
>> - addi a1, a1, 4
>> - sw t3, 0(a0)
>> - addi a0, a0, 4
>> - bnez t2, word_copy
>> - beqz a2, exit_memcpy
>> - j byte_copy
>> -
>> -do_reverse:
>> - add a0, a0, a2
>> - add a1, a1, a2
>> - andi a2, a2, 0x3
>> - li t4, -1
>> - beqz t2, reverse_byte_copy
>> -
>> -reverse_word_copy:
>> - addi a1, a1, -4
>> - addi t2, t2, -1
>> - lw t3, 0(a1)
>> - addi a0, a0, -4
>> - sw t3, 0(a0)
>> - bnez t2, reverse_word_copy
>> - beqz a2, exit_memcpy
>> -
>> -reverse_byte_copy:
>> - addi a0, a0, -1
>> - addi a1, a1, -1
>> -
>> -byte_copy:
>> - lb t3, 0(a1)
>> - addi a2, a2, -1
>> - sb t3, 0(a0)
>> - add a1, a1, t4
>> - add a0, a0, t4
>> - bnez a2, byte_copy
>> -
>> -exit_memcpy:
>> - move a0, t0
>> - move a1, t1
>> - ret
>> + /*
>> + * Here we determine if forward copy is possible. Forward
>> copy is
>> + * preferred to backward copy as it is more cache friendly.
>> + *
>> + * If a0 >= a1, t0 gives their distance, if t0 >= a2 then we
>> can
>> + * copy forward.
>> + * If a0 < a1, we can always copy forward. This will make t0
>> negative,
>> + * so a *unsigned* comparison will always have t0 >= a2.
>> + *
>> + * For forward copy we just delegate the task to memcpy.
>> + */
>> + sub t0, a0, a1
>> + bltu t0, a2, 1f
>> + tail __memcpy
>> +1:
>> +
>> + /*
>> + * Register allocation for code below:
>> + * a0 - end of uncopied dst
>> + * a1 - end of uncopied src
>> + * t0 - start of uncopied dst
>> + */
>> + mv t0, a0
>> + add a0, a0, a2
>> + add a1, a1, a2
>> +
>> + /*
>> + * Use bytewise copy if too small.
>> + *
>> + * This threshold must be at least 2*SZREG to ensure at
>> least one
>> + * wordwise copy is performed. It is chosen to be 16 because
>> it will
>> + * save at least 7 iterations of bytewise copy, which pays
>> off the
>> + * fixed overhead.
>> + */
>> + li a3, 16
>> + bltu a2, a3, .Lbyte_copy_tail
>> +
>> + /*
>> + * Bytewise copy first to align t0 to word boundary.
>> + */
>> + andi a2, a0, ~(SZREG-1)
>> + beq a0, a2, 2f
>> +1:
>> + addi a1, a1, -1
>> + lb a5, 0(a1)
>> + addi a0, a0, -1
>> + sb a5, 0(a0)
>> + bne a0, a2, 1b
>> +2:
>> +
>> + /*
>> + * Now a0 is word-aligned. If a1 is also word aligned, we
>> could perform
>> + * aligned word-wise copy. Otherwise we need to perform
>> misaligned
>> + * word-wise copy.
>> + */
>> + andi a3, a1, SZREG-1
>> + bnez a3, .Lmisaligned_word_copy
>> +
>> + /* Wordwise copy */
>> + addi t0, t0, SZREG-1
>> + bleu a0, t0, 2f
>> +1:
>> + addi a1, a1, -SZREG
>> + REG_L a5, 0(a1)
>> + addi a0, a0, -SZREG
>> + REG_S a5, 0(a0)
>> + bgtu a0, t0, 1b
>> +2:
>> + addi t0, t0, -(SZREG-1)
>> +
>> +.Lbyte_copy_tail:
>> + /*
>> + * Bytewise copy anything left.
>> + */
>> + beq a0, t0, 2f
>> +1:
>> + addi a1, a1, -1
>> + lb a5, 0(a1)
>> + addi a0, a0, -1
>> + sb a5, 0(a0)
>> + bne a0, t0, 1b
>> +2:
>> +
>> + mv a0, t0
>> + ret
>> +
>> +.Lmisaligned_word_copy:
>> + /*
>> + * Misaligned word-wise copy.
>> + * For misaligned copy we still perform word-wise copy, but
>> we need to
>> + * use the value fetched from the previous iteration and do
>> some shifts.
>> + * This is safe because we wouldn't access more words than
>> necessary.
>> + */
>> +
>> + /* Calculate shifts */
>> + slli t3, a3, 3
>> + sub t4, x0, t3 /* negate is okay as shift will only
>> look at LSBs */ +
>> + /* Load the initial value and align a1 */
>> + andi a1, a1, ~(SZREG-1)
>> + REG_L a5, 0(a1)
>> +
>> + addi t0, t0, SZREG-1
>> + /* At least one iteration will be executed here, no check */
>> +1:
>> + sll a4, a5, t4
>> + addi a1, a1, -SZREG
>> + REG_L a5, 0(a1)
>> + srl a2, a5, t3
>> + or a2, a2, a4
>> + addi a0, a0, -SZREG
>> + REG_S a2, 0(a0)
>> + bgtu a0, t0, 1b
>> +
>> + /* Update pointers to correct value */
>> + addi t0, t0, -(SZREG-1)
>> + add a1, a1, a3
>> +
>> + j .Lbyte_copy_tail
>> +
>> END(__memmove)
>
> ping. It's been 3 month since submission and I really would like to see
> this applied or at least have some feedbacks.
>
> Link to the original patch in archive:
> https://lore.kernel.org/linux-riscv/20210216225555.4976-1-gary@garyguo.net/

Sorry, I thought I replied to this one but it must have gotten lost
somewhere.

IMO the right way to go here is to just move to C-based string routines,
at least until we get to the point where we're seriously optimizing for
specific processors. We went with the C-based string rountines in glibc
as part of the upstreaming process and found only some small performance
differences when compared to the hand-written assembly, and they're way
easier to maintain.

IIRC Linux only has trivial C string routines in lib, I think the best
way to go about that would be to higher performance versions in there.
That will allow other ports to use them.

\
 
 \ /
  Last update: 2021-05-23 03:48    [W:0.078 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site