lkml.org 
[lkml]   [2021]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: bd70528: Convert to use regulator_set_ramp_delay_regmap
Date
Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/bd70528-regulator.c | 37 ++++++++++++---------------
1 file changed, 16 insertions(+), 21 deletions(-)

diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index 1f5f9482b209..e6fec70fabfa 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -16,10 +16,6 @@
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>

-#define BUCK_RAMPRATE_250MV 0
-#define BUCK_RAMPRATE_125MV 1
-#define BUCK_RAMP_MAX 250
-
static const struct linear_range bd70528_buck1_volts[] = {
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
@@ -47,22 +43,9 @@ static const unsigned int led_volts[] = {
20000, 30000
};

-static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
- if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) {
- unsigned int ramp_value = BUCK_RAMPRATE_250MV;
-
- if (ramp_delay <= 125)
- ramp_value = BUCK_RAMPRATE_125MV;
-
- return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
- BD70528_MASK_BUCK_RAMP,
- ramp_value << BD70528_SIFT_BUCK_RAMP);
- }
- dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n",
- rdev->desc->name, ramp_delay);
- return -EINVAL;
-}
+static const unsigned int bd70528_buck_ramp_table[] = {
+ 250, 125
+};

static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
@@ -90,7 +73,7 @@ static const struct regulator_ops bd70528_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd70528_set_ramp_delay,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
};

static const struct regulator_ops bd70528_ldo_ops = {
@@ -127,6 +110,10 @@ static const struct regulator_desc bd70528_desc[] = {
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK1_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .ramp_reg = BD70528_REG_BUCK1_VOLT,
+ .ramp_mask = BD70528_MASK_BUCK_RAMP,
+ .ramp_delay_table = bd70528_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
.owner = THIS_MODULE,
},
{
@@ -143,6 +130,10 @@ static const struct regulator_desc bd70528_desc[] = {
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK2_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .ramp_reg = BD70528_REG_BUCK2_VOLT,
+ .ramp_mask = BD70528_MASK_BUCK_RAMP,
+ .ramp_delay_table = bd70528_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
.owner = THIS_MODULE,
},
{
@@ -159,6 +150,10 @@ static const struct regulator_desc bd70528_desc[] = {
.enable_mask = BD70528_MASK_RUN_EN,
.vsel_reg = BD70528_REG_BUCK3_VOLT,
.vsel_mask = BD70528_MASK_BUCK_VOLT,
+ .ramp_reg = BD70528_REG_BUCK3_VOLT,
+ .ramp_mask = BD70528_MASK_BUCK_RAMP,
+ .ramp_delay_table = bd70528_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table),
.owner = THIS_MODULE,
},
{
--
2.25.1
\
 
 \ /
  Last update: 2021-05-22 14:43    [W:0.051 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site