lkml.org 
[lkml]   [2021]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] tty: serial: meson: add amlogic,uart-fifosize property
Date
On most of the Amlogic SoCs, the first UART controller in the "Everything-Else"
power domain has 128bytes of RX & TX FIFO, so add an optional property to describe
a different FIFO size from the other ports (64bytes).

This adds a property in the bindings, reads the property from the driver and updates
the DT with the new property.

Changes since v2:
- removed spurious blank line from bindings

Changes since v1:
- switched to a more generic "fifo-size"

Neil Armstrong (3):
dt-bindings: serial: amlogic,meson-uart: add fifo-size property
tty: serial: meson: retrieve port FIFO size from DT
arm64: dts: meson: set 128bytes FIFO size on uart A

.../devicetree/bindings/serial/amlogic,meson-uart.yaml | 5 +++++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 +
drivers/tty/serial/meson_uart.c | 5 ++++-
5 files changed, 12 insertions(+), 1 deletion(-)

--
2.25.1

\
 
 \ /
  Last update: 2021-05-18 09:59    [W:0.137 / U:1.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site