lkml.org 
[lkml]   [2021]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v6 01/25] net: dsa: qca8k: change simple print to dev variant
Date
Change pr_err and pr_warn to dev variant.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/qca8k.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index cdaf9f85a2cb..0b295da6c356 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -701,7 +701,7 @@ qca8k_setup(struct dsa_switch *ds)

/* Make sure that port 0 is the cpu port */
if (!dsa_is_cpu_port(ds, 0)) {
- pr_err("port 0 is not the CPU port\n");
+ dev_err(priv->dev, "port 0 is not the CPU port");
return -EINVAL;
}

@@ -711,7 +711,7 @@ qca8k_setup(struct dsa_switch *ds)
priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
&qca8k_regmap_config);
if (IS_ERR(priv->regmap))
- pr_warn("regmap initialization failed");
+ dev_warn(priv->dev, "regmap initialization failed");

ret = qca8k_setup_mdio_bus(priv);
if (ret)
--
2.30.2
\
 
 \ /
  Last update: 2021-05-14 23:01    [W:0.947 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site