Messages in this thread | | | From | Neil Armstrong <> | Subject | [PATCH v3 0/3] arm64: meson-sm1: add support for Banana PI BPI-M5 | Date | Fri, 14 May 2021 16:32:52 +0200 |
| |
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header
This also adds the missing toacodec node to enable internal audio codec.
Changes since v2 at [2]: - small nit fix in DT comment
Changes since v1 at [1]: - fixed bad compatible for sm1 toacodec node - removed tab in bindings (but kept martin's review tag) - renamed adc key node - renamed flash_1v8 regulator to match schematics - fixed vddcpu regulator voltages - fixed ethmac rgmii-txid and checked it still worked - added missing GPIO lines names (thanks martin !)
[1] https://lore.kernel.org/r/20210429170404.3616111-1-narmstrong@baylibre.com [2] https://lore.kernel.org/r/20210505073248.3816183-1-narmstrong@baylibre.com
Neil Armstrong (3): arm64: dts: meson-sm1: add toacodec node dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
.../devicetree/bindings/arm/amlogic.yaml | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-sm1-bananapi-m5.dts | 646 ++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 10 + 4 files changed, 658 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
-- 2.25.1
| |